Home > Shop Brands > Potter > Fire Systems >

  Potter PFC-6030 Fire Alarm Control Panel Analog Addressable FACP

Potter PFC-6030 Fire Alarm Control Panel


 

Our Price : $505.00

UPC Code: 785192020950

Product Code: PL-PFC6030

Qty:

Description
 
The PFC-6030 is a powerful thirty point analog/addressable fire alarm control panel. The panel utilizes the Potter/Nohmi device protocol that has a complete line of initiating and control devices. The SLC is capable of 50 ohms of resistance and does not require the use of twisted or shielded wire. The thirty (30) points may be any combination of smoke sensors, heat detectors or modules.
The PFC-6030 has metal cabinet with a key lock and a dead front standard. The large viewing window allows easy viewing of the LCD and the standard LEDs. The keypad allows easy operation and navigation of the system menu.
The panel has a 3.5 amp power supply with two (2) notification circuits each rated and 3 amps. All of the outputs are power limited, are power regulated and may be programmed for Potter/AMSECO, Gentex®, CooperWheelock® and System Sensor® strobe synchronization. The outputs may be configured for any combination of strobe brands and all will sync. The outputs also may be configured for door holder power, auxiliary power and constant power.
The panel has auto-programming that will not affect the existing system when adding or deleting a device. The system is capable of 99 software zones, cross zoning and counting zones. The panel is fully programmed from a PC based software program that will work with Microsoft XP, Vista or Windows 7.0 operating systems.
The system support a digital alarm communicator transmitter (UDACT-1000) that is programmable for a single line or dual line reporting. The UDACT is programmable to send Ademco Contact ID or SIA DCS protocols. The UDACT is programmable to communicate with up to five different receivers with primary and secondary numbers for each. The UDACT neatly mounts under the display with minimal installation time. The UDACT has RJ-45 connections for quick connection to the telephone lines.
The complete system may be converted to Class A with a CA-6075 module. The CA-6075 provides the hardware necessary to convert the remote annunciators through the Potter P-Link connection protocol, the NACs and the SLC to Class A operation.
The panel has an Ethernet connection for programming and network connectivity. The system uses a simple patch cable for connecting a PC to the panel. In addition, the system may be connected to a building network and programmed while on the network. The system has a built in e-mail function and may be programmed to send reports as desired as well as condition of the system

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Potter > Fire Systems
Shop Brands > Potter > Fire Systems > Fire Alarm Panels
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please