The PSN-1000E is an intelligent power supply that connects to the P-Link bus of any Potter 6000 series panel. It features a 10 amp power supply and 6 NACs each rated at 3 amps. The PSN-1000E features a large enclosure to house additional SLCE-127 Loop Expanders on the exclusive Potter Stacker Bracket. Each PSN-1000E cabinet will hold up to 6 SLCE-127 devices. Quadrasync provides panel wide synchronization of same or multiple brands.

• 120/240 VAC Input at 50/60 HZ
• 5.1 Amps/3.0 Amps max draw
• Standby Current 60 mA
• Alarm Current 200 mA
• UL S2930 CSFM 7165-0328: 0198

The PSN-1000 series is a UL listed intelligent 10 amp notification power supply and P-Link (RS-485) repeater. The power supply connects to
the P-Link bus from the control panel and is operated and supervised from the panel. The power supply may be installed 6,500 feet from the
control panel. The PSN-1000 then repeats the P-Link communication for another 6,500 feet.
The power supply has six (6) Class B or three (3) Class A power outputs. Each output is regulated and power limited with a 3 Amp maximum
rating. In addition, the PSN-1000 has two (2) programmable dry contact inputs. The dry contact inputs are Class B, supervised inputs.
The power supply operates on either 120 or 220 VAC power and has a regulated 24 VDC output. In addition, the panel can charge up to 55 AH
batteries and will house 18 AH batteries. The cabinet is constructed out of 18 gauge cold rolled steel with a durable red powder coat finish. A
standard Potter key lock is provided for securing the door. Electrical conduit knockouts are provided on the sides and top providing installers
with multiple options for installing conduits and providing proper power separations.
The PSN-1000 is a self contained intelligent power supply/P-Link repeater complete with cabinet. The PSN-1000E is the intelligent power
supply/P-Link repeater with additional cabinet room for the exclusive Stacker Bracket for SLCE-127 loop expanders. Both cabinets include
space for 18 AH batteries.
The power supplies are programmed and controlled through the main control panel P-Link bus. The panel displays any troubles or off normal
conditions of the power supply and the events are stored in the panel history buffer.
Each output can be independently configured to provide one of four synchronization patterns, constant power, ANSI temporal Code 3 or Door
Holder power. The panel can be configured to synchronize Potter/AMSECO, Gentex, Cooper Wheelock and System Sensor.