PSN Series Notification Power Expanders

The PSN NAC Expanders come in the following configurations:

• PSN-106: 10 amps with 6 outputs
• PSN-64: 6 amps with 4 outputs

Quadrasync provides panel wide synchronization of same or multiple brands1. Reference EOL allows 2k - 27k EOL value to be used.

• Dimensions: 16 1/8"W x 16 3/4"H x 3 1/2"D
• Product includes a 5 year warranty

The PSN series of notification power supplies offers reliable notification
power with unprecedented versatility. The power supplies offer either
6 or 10 amps of continuous power through 4 or 6 outputs respectively.
Each output is rated at 3 amps and it may be used continuously without
any derating.
The power supply operates on either 120 VAC or 220 VAC power input
and has a regulated 24 VDC output. In addition, the panel can charge
up to 55 AH batteries and leads the industry in housing up to 18 AH
batteries. The cabinet is constructed out of 18 gauge cold rolled steel and
has a durable red powder coat finish. In addition, a key lock is provided
for securing the door. Ample electrical knockouts are provided on the
sides and the top, allowing the installer options for running wires and
maintaining the correct separations.
The power supply offers an industry leading Quadrasync function that
allows for multiple strobe circuits of different brands to be synchronized
to flash at the same time. The panel can have four different brands each
connected to its own circuit and all of the strobes flash together.
Each output can independently be configured to provide one of
four synchronizations or steady power. This provides unequivocal
flexibility in new and retrofit installations. The panel can be configured
to synchronize Potter/AMSECO®, Gentex®, Wheelock® and System
patent pending
Sensor® strobe devices. Each output can be configured the same sync
protocol or set independently.
In addition, the panel has an input PassThru mode allows the outputs
to follow the input signal and sync up the input flash. The panel will
recognize the type of input being supplied and pass this through to the
outputs with the same pattern. This input pass through can be selected
on each output independently.
The power supply contains simple dipswitch programming and LED
indications providing the installer indications of the operation and the
ability to correct any faults. A Trouble Memory is provided to allow an
installer to review past troubles and make the necessary repairs. Each
output has an LED to pin point the exact circuit where a problem may
have occurred. Relays are provided for monitoring the general system
and AC failure.
Each output and be independently configured for various applications
and installations. Each output can be independently configured for Class
A or Class B operation, constant power, ANSI Temporal Code 3, Single,
Multiple or Combo Inputs or Door Holder Power.