The Potter Pull Station Series offers a complete line of die-cast pull stations for a variety of applications focusing mainly on fi re alarm systems. The pull stations are available in single or dual action models. All of the pull stations have a 10-amp snap action switch and a dedicated terminal block for the ease of wire connections. All of the metal is completely coated to inhibit corrosion and provide for a uniform and quality finish. The standard models have a hex key reset, however a key reset is also available. The models are available with shallow and deep surface mount back boxes, nine different colors, and two different plating materials, as well as a weatherproof version that is rated for NEMA 4. OPERATION:The Potter single action series of pull stations operate by pulling the white operating handle straight down and the handle will lock into place. The dual action stations require the lifting of the front cover and then pulling the white operating handle straight down. The stations are reset by opening the front and placing the handle in the normal position. • UL Listed, FM Approved, CSFM Listed, MEA Approved, ADA Compliant • Single or Dual Action • Terminal connectors • 10 Amp Snap Action Switch • Gold plated SPST contacts • Optional auxiliary contacts • Mounts on standard single gangbox • Surface backboxes available • High-gloss red enamel fi nish • Glass breakrod • Made in the U.S.A.