You are here: Home > Access Control > Power Supplies
We found 11 results matching your criteria.
Power Supplies
Sort By:
Page of 1
Altronix AL624 - Linear Power Supply / Charger Altronix AX-AL175ULX Access Control Power Supply/Charger
Linear Power Supply / Charger
The AL624 Linear Power Supply / Charger will convert a low voltage AC input to a low voltage DC output. This general purpose power supply has a wide range of applications for access control, security and CCTV system accessories that require additional power.
• Selectable 6-12-24VDC power limited output.
• 1.2 amp continuous supply current at 6-12VDC.
• 750mA continuous supply current at 24VDC.
• Filtered and electronically regulated output.
• Built-in charger for sealed lead acid or gel type batteries.
• Maximum charge current 300mA.
• Automatic switchover to stand-by battery when AC Fails.
• AC input and DC output LED indicators.
• Thermal and short circuit protection with auto reset.
• Fused battery protection (circuit breakers available).
• Snap Trac compatible (order Altronix model #ST3).
• DIN Rail mount version available
(order Altronix model #DPS1).
• Includes battery leads.
• Extremely compact design.
Access Control Power Supply/Charger

The AL175ULX are power limited power supply/chargers that will convert 115VAC / 60Hz input, into two individually PTC protected 12VDC or 24VDC output, (see specifications). They are intended for use in applications requiring UL Listing for Access Control (UL294) and applications requiring an interface with Fire Alarm Control Panels.

• UL Listed - U.S. and Canada Access Control Systems (UL294).
• CSFM approved - California State Fire Marshal.
• MEA approved - NYC Dept. of Buildings 18-98-E.
• Switch selectable 12VDC or 24VDC power limited output.
• Class 2 rated.
• 1.75 amps continuous supply current @ 12VDC or 24VDC.
• Filtered and electronically regulated output.
• Aux relay output: (form "C", 1 amp, 28VDC).
• AC Fail output relay (form "C" 1 amp, 28VDC).
• Maximum charge current: 400mA.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• AC input and DC output LED indicators.
• Thermal overload protection.
• Short circuit protection.
• Includes battery leads.
Enclosure Dimensions: 13.5"H x 13"W x 3.25"D
Altronix AX-AL400UL3 UL Listed, Triple-Output Access Control Power Supply/Charger Altronix AX-AL400ULX UL Listed, Multi-Agency Approved Power Supply/Charger
UL Listed, Triple-Output Access Control Power Supply/Charger

The AL400UL3 multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. The AL400UL3 converts a 115VAC 50/60Hz input into three individually regulated power limited outputs (see specifications).

• UL Listed for Access Control Systems, Burglar Alarm Systems and
Fire Protective Signaling Systems (UL294, UL603, UL1481).
• CSFM - California State Fire Marshal Approved.
• MEA - NYC Department of Buildings Approved.
• NFPA 72 compliant.
• All outputs are Class 2 rated.
• Input 115VAC 50/60Hz, 1.45 amp.
• 1.75 amp continuous supply current at 5VDC.
• 1.75 amp continuous supply current at 12VDC.
• 1.5 amp continuous supply current at 24VDC.
• Filtered and electronically regulated outputs.
• 51 mV p/p output ripple.
• Maximum charge current .7 amp.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Zero voltage drop when switching over to battery backup.
• Thermal and short circuit protection with auto reset.
• DC output LED indicators.
• AC fail supervision (form "C" contact rated 1 amp @28VDC).
• Battery fail and battery presence supervision (form "C" contact rated 1 amp @ 28VDC).
• Power supply is complete with enclosure, cam lock, and battery leads.
• Enclosure accommodates up to two (2) 7AH batteries.
UL Listed, Multi-Agency Approved Power Supply/Charger
The AL400ULX power supply converts a 115VAC / 60Hz input, to a 12VDC or 24VDC power limited output, (see specifications). The AL400ULX is UL Listed for fire alarm, burglar alarm, and access control applications.
• UL Listed fire, burglar, nurse call and access control power supply (UL294, UL603, UL1069, UL1481).
• NYC Department of Buildings Approved (MEA).
• California State Fire Marshal Approved (CSFM).
• FM approved.
• NFPA 72 compliant.
• Class 2 rated.
• Switch selectable 12VDC or 24VDC power limited output.
• Input 115VAC / 60Hz, 1.45 amp.
• Maximum charge current .7 amp.
• 4 amps continuous supply current at 12VDC.
• 3 amps continuous supply current at 24VDC.
• Filtered and electronically regulated outputs.
• 51 mV p/p output ripple.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Zero voltage drop when switched over to battery backup.
• AC input and DC output LED indicators.
• AC fail supervision (form "C" contacts).
• Low battery supervision (form "C" contacts).
• Battery presence and low battery supervision (form "C" contacts).
• Short circuit and thermal overload protection.
• Unit is complete with power supply, enclosure, cam lock.
• Includes battery leads.
Enclosure Dimensions: 13.5”H x 13”W x 3.25”D
Altronix AX-AL600UL3 UL Listed, Triple-Output Access Control Power Supply/Charger Altronix AX-AL600ULX UL Listed, Multi-Agency Approved Power Supply/Charger
UL Listed, Triple-Output Access Control Power Supply/Charger

The AL600UL3 triple output access control power supply/charger is specifically designed for use with access control systems and accessories. The AL600UL3 converts a 115 VAC / 60Hz input into three individually circuit breaker protected 5VDC, 12VDC and 24VDC regulated outputs (see specifications).

• UL Listed for Access Control Systems and for Fire protective Signaling Systems (UL294 & UL1481).
• NYC Department of Buildings Approved (MEA).
• California State Fire Marshal Approved (CSFM).
• Class 2 rated (5VDC and 12VDC outputs).
• Input 115VAC / 60Hz, 1.9 amp.
• 1.75 amp continuous supply current @ 5VDC.
• 1.75 amp continuous supply current @ 12VDC.
• 3 amp continuous supply current @ 24VDC.
• Filtered and electronically regulated outputs, 100mV peak output voltage ripple.
• Maximum charge current .7 amp.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Thermal and short circuit protection with auto reset.
• AC input and DC output LED indicators.
• AC fail supervision (form "C" contact).
• Battery fail and battery presence supervision (form "C" contact).
• Power supply is complete with enclosure, cam lock, and battery leads.
• Enclosure accommodates up to two (2) 7AH batteries.
UL Listed, Multi-Agency Approved Power Supply/Charger
The AL600ULX power supply converts a 115 VAC / 60Hz input, to a 12VDC or 24VDC non-power limited output, (see specifications). The AL600ULX is UL Listed for all fire alarm, and access control applications.
• UL Listed fire and access control power supply (UL1481, UL294).
• CSFM approved - California State Fire Marshal.
• MEA approved - NYC Department of Buildings.
• NFPA 72 compliant.
• Field selectable 12VDC or 24VDC non-power limited output.
• Input 115VAC/60Hz, 1.9 amp.
• Maximum charge current .7 amp.
• 6 amps continuous supply current at 12VDC / 24VDC.
• Filtered and electronically regulated output, 100mV peak output voltage ripple.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Zero voltage drop when switched over to battery backup.
• AC input and DC output LED indicators.
• AC fail supervision (form "C" contacts).
• Low battery and battery presence supervision (form "C" contacts).
• Thermal overload protection.
• Short circuit protection.
• Unit is complete with power supply, enclosure and cam lock.
• Includes battery leads.
Altronix LPS3 - Linear Power Supply/Charger Altronix LPS3C12X - Linear Power Supply/Charger
Linear Power Supply/Charger
The LPS3 Linear Power Supply / Charger will convert a low voltage AC input to a low voltage 12/24VDC output. This power supply is specifically designed to provide to power needed by the most demanding security and access control applications.
β€’ Field selectable 12/24VDC power limited output.
β€’ 2.5 amps continuous supply current.
β€’ Filtered and electronically regulated output.
β€’ Built-in charger for sealed lead acid or gel type batteries.
β€’ Maximum charge current 500mA.
β€’ Automatic switch over to stand-by battery.
β€’ AC input and DC output LED indicators.
β€’ Over voltage protection.
β€’ Thermal overload and short circuit protection.
β€’ Fused battery protection (circuit breaker available).
β€’ Efficient switch mode design.
β€’ Includes battery leads.
Board Dimensions: 6.5”L x 3.5”W x 1.75”H
Specified at 25ΒΊ C ambient.
Linear Power Supply/Charger
The Altronix LPS3C12X Linear Power Supply/Charger is specifically designed to provide the power needed by the most demanding security and access control applications. It will convert a 115VAC 60Hz input to a 2.5 amp 12VDC continuous power limited output.
• Input 115 VAC 60Hz, .5 amp
• 12VDC power limited output
• Maximum charge current .5 amp
• 2.5 AMP continuous supply current
• Filtered and electronically regulated output
• Over voltage protection
• Built-in charger for sealed lead acid or gel type batteries
• Automatic switchover to stand-by battery when AC Fails
• Thermal and short circuit protection with auto reset
• Fused battery protection (circuit breakers available)
• AC input and DC output LED indicators
• Includes battery leads
Enclosure dimensions: 15.5” L x 12” W x 4.5” H
Altronix LPS3C24X - Linear Power Supply/Charger Altronix LPS5C12X - Linear Power Supply/Charger
CAN USE WITH HU-5375AGN00

Linear Power Supply/Charger
LPS3-C24X Linear Power Supply/Charger is specifically designed to provide the power needed by the most demanding security and access control applications. It will convert a 115VAC 60Hz input to a 2.5 amps 24VDC continuous power limited output.
• Input 115 VAC 60Hz, .7 amp.
• 24VDC power limited output.
• Maximum charge current .5 amp.
• 2.5 amps continuous supply current.
• Filtered and electronically regulated output.
• Over voltage protection.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switchover to stand-by battery when AC Fails.
• Thermal and short circuit protection with auto reset.
• Fused battery protection (circuit breakers available).
• AC input and DC output LED indicators.
• Includes battery leads.
Enclosure dimensions: 15.5"H x 12"W x 4.5"D

Linear Power Supply/Charger
LPS5C12X Linear Power Supply/Charger is specifically designed to provide the power needed by the most demanding security and access control applications. It will convert a 115VAC 60Hz input to a 3.5 amp 12VDC continuous true UPS output. The output stays regulated until the battery discharges to 25% capacity.

Input:
• 115 VAC, 60Hz @ .8 amp
Ouput:
• 12VDC @ 3.5amp
• Filtered and electronically regulated.
• Thermal and overload protection and with autoreset.
Battery Backup:
• Built in charger for sealed lead acid batteries.
• Automatic switchover to stand-by battery when AC Fails.
• Fused battery protection (circuit breakers available).
• Maximum charge current .3 amp.
Visual Indicators:
• AC input and DC output LED indicators.
Supervision:
• Low battery and AC fail supervision (dry relay outputs 1 amp @ 28VDC).
Additional Features:
• Includes battery leads.
• Enclosure dimensions: 13.5” L x 13” W x 3.25” H
Altronix AL62412C - Linear Power Supply / Charger
Marketing Information

12Vdc 1.2Amp Battery/ Trans Kit
Package Contents

   Power Supply
   12VDC 4AH Rechargeable Battery
   16.5VAC 20VA Class 2 Rated Plug-in Transformer
   
 
Power Supplies
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please