Home > Fire Alarms >

Detectors for Fire Alarm Systems

>

Outdoor Motion Detectors for Fire Alarm Systems

>


 

ProTech SDI-77XL-MIL-C Dual Technology Sensor 125' x 20' Narrow (38m x 6m) (w/Lens C)


ProTech SDI-77XL-MIL-C Dual Technology Sensor 125' x 20' Narrow (38m x 6m) (w/Lens C)


 

Our Price : $898.64


Product Code: 485571

Qty:

Description
 

The High Security Versions of the PIRAMID XL offer enhanced detection capability when compared to the standard PIRAMID XL AND XL2 Versions. The detection parameters are altered to enable these sensors to offer greater overall detection capability for slow moving, fast moving and crawling intruders.
The PIRAMID XL high security version sensors are manufactured using PROTECH’s proprietary Stereo Doppler Microwave Technology. The high security versions of the PIRAMID XL sensors are offered as dual technology sensors, as well as single technology microwave-only sensors. The following are models offered in each category:

Dual technology: SDI-76XL-MIL, SDI-77XL-MIL, SDI-76XL-HS, SDI-77XL-HS

Single technology: SDI-76XL-MW, SDI-77XL-MW

The Dual Technology models are also equipped with a dual element Passive Infrared Sensor. In these versions the independent sensor modules are “And Gated” and must activate simultaneously to create an overall sensor alarm. The various models of high security PIRAMID XL offer different levels of detection capability and stability. Models SDI-76XL-MW AND SDI-77XL-MW offer the best detection capability while providing good stability. Models SDI-76XL-MIL, SDI-77XL-MIL, SDI-76XL-HS AND SDI-77XL-HS offer excellent detection capability and stability.

  • Stereo Doppler Microwave Sensor – Two receiving channels with the ability to eliminate vibration and periodically moving objects as sources of false alarms.
  • Dual Element Infrared Sensor – Ignores normal temperature
    variations yet is very responsive to rapid infrared changes created
    by an intruder. (Dual Technology Sensors Only).
  • Microprocessor Controlled – Proprietary integrated circuit design
    provides enhanced digital signal processing for both microwave
    and passive infrared technologies.
  • Balanced Temperature Compensation – Stereo Doppler Microwave
    and Passive Infrared portions automatically adjust detection parameters to
    compensate for losses in range that occur at elevated temperatures. (Dual Technology Sensors Only).
  • Stereo Doppler Supervision – A component failure will cause the sensor to lock –in alarm.
  • Digital Range Control – Ten-position digital switch adjusts how far
    the sensor detects (to its maximum range).
  • Digital Sensitivity Control - Ten-position digital switch adjusts the amount of movement required to initiate an alarm condition.
  • Master Alarm LED – Displayed on the face of the unit indicating the alarm relay status.
  • Analytic LED’s – Alarm and environmental caution LED’s for both technologies are displayed on the face of the sensor. An internal switch can disable both Master and Analytic LED’s .
  • Walk-Test Sounder - Optional audible tester to assist in walk-test and initial sensor set-up. The XL-Sounder greatly simplifies the installation as it enables walk-testing and adjustment by a single installer.
  • Swivel Mounting – 180 degree Horizontal Adjustment
    90 degree Vertical Adjustment
  • Tamper Proof - Tamper switch with terminal connection.
  • All Solid State Relay – User selectable form C relay output. A solid State relay is flexible, silent and more reliable than an electromechanical relay.
  • Metal Housing – Rugged, weather-proof housing offers maximum protection against RFI and EMI interference.
  • Weather Shroud - Metal hood that routes rain away from sensor’s face and provides maximum protection from ice, snow, wind and sun loading.
  • *HS Auxiliary PC Board - Optional factory installed satellite printed circuit board that provides anti-masking and remote self-test features.
Input Voltage: 8.5 to 20 VDC
Current Consumption: 150 mA @ 12 VDC (LED’s off)
RF Power Density: 120 u/W/cm 2 max. at the face of the unit
Operating Temperature: -30F to 130F (-34C to 54C)
Operating Humidity: 0 to 100% Relative Humidity
Relay Contact Rating: 0.1A, 50V
Housing Dimensions: 6 ¼” L x 5 ¼” W x 3¼ “H
16.5cm L x 13.3cm W x 8.5cm H
Shroud Dimensions: 9 ¼” L x 6”W x 4 ¼” H
Microwave Frequency: Factory adjusted to one of the following
Frequencies: 10,525 MHz USA, Other International Frequencies Also Available.

ORDER INFORMATION

SDI-76XL-MIL 50ft. x 50ft. 15m x 15m Dual Technology Sensor
SDI-77XL-MIL 100ft. x 10ft. 30m x 3m Dual Technology Sensor
SDI-76XL-HS* 50ft x 50ft. 15m x 15m Dual w/Anti-Masking
SDI-77XL-HS* 100ft. x 10ft. 30m x 3m Dual w/Anti-Masking
SDI-76XL-MW 50ft. x 50ft. 15m x 15m Microwave Sensor Only
SDI-77XL-MW 100ft. x 60ft. 30m x 18m Microwave Sensor Only
XL-Sounder Audible Tester

HS Versions*


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Fire Alarms >

Detectors for Fire Alarm Systems

>

Outdoor Motion Detectors for Fire Alarm Systems


Shop Brands > ProTech Protection Technologies Inc
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please