You are here: Home > Access Control > Egress Devices > PIR for Access Control
We found 59 results matching your criteria.
Request-to-Exit PIR. RTE-PIR is a passive infrared exit detector.
Sort By:
Page of 5
Bosch DS151i Request-to-Exit Sensor Black Bosch DS160 Surface Mount Detector in Light Grey Enclosure
DS151i Request-to-exit PIR Detector Black enclosure. For use in request-to-exit (REX) applications. Provides 2.4 m x 3 m (8 ft x 10 ft) coverage.

The DS151i Request-to-Exit Sensors have a built-in adjustable timer, selectable Fail Safe/Fail Secure settings, and internal vertical pointability with an 8 ft. x 10 ft. (2.5 m x 3 m) wrap-around coverage pattern. Black.

Features

  • Single or double door use
  • Wall or ceiling mountable
  • Internal vertical pointability
  • Wrap-around coverage pattern
  • Selectable relay trigger mode
  • Selectable fail safe/fail secure modes
  • The DS160 Detector is specifically designed for Request-to-Exit (REX) applications. With features such as built-in timers, door monitor with sounder alert, and pointable coverage, the DS160 has the flexibility to meet the most stringent REX requirements. The exclusive Sequential Logic Input (SLI) provides added security that is not offered in any other REX device.

    Features

  • Door monitor with sounder alert
  • Sequential Logic Input (SLI) & Activation LED
  • Internal vertical pointability & Adjustable sounder volume
  • Wrap-around coverage pattern with precise pattern control
  • Up to 64 second adjustable latch time
  • Selectable relay trigger mode & Selectable fail safe/fail secure modes
  • Camden CM-419S Request-to-Exit Sensor (Silver) Honeywell CK-IS310BL Request-to-Exit PIR Black

    Request-to-Exit Sensor (Silver)

    CAMDEN DOOR CONTROLS, CM-419 series of Request-to-Exit Sensors are designed with dual pyroelectric sensors for increased stability against external light. The sensor adjusts straight downwards, blanketing the doorway to angles of 35º in front of the door. The detection area of the sensor is adaptable to cover a single door or double doors. Output relay hold times are adjustable from 0.25 to 60 seconds. Heavy-duty output relays can drive up to 1 amp of current for controlling door strikes and magnetic locks. Fail safe – Fail secure operation is available via dip switches. The CM-419 series Request-to-Exit sensors are available in white or silver.

    Camden Door Controls, CM-419 Series Request-To-Exit Sensors, are designed for applications involving coverage at the threshold of a doorway. They can be combined with a card access system to shunt out the alarm system. Varied field selectable options make it a compatible choice for door strike release and alarm system shunting.

    Features:
    • Passive infra-red sensor
    • Dual pyros for increased stability
    • Ceiling, wall or frame mount
    • Adjustable coverage for single and double doors
    • Adjustable .25-60 second timer
    • 12-24 V AC/DC
    • Two form C relay outputs for activating cameras, remote devices, door shunting or to de-activate mag lock in case of system failure
    • Fail-safe or fail-secure operation
    • U/L listed
    REPLACES NC-IS310BL

    Honeywell’s Request-to-Exit (RTE) sensors offer basic and full-featured models to suit every access control application. The quick-install sensors are extremely flexible, provide a generous amount of wiring room and contain built-in internal “tamper proof” shutters to enable precise target area detection.

    IS310WH (0-000-361-01) Entry Level RTE - White Honeywell IS310BLTP (5-531-395-02)  Trim Plate for IS310 and IS320 - Black
    REPLACES NC-IS310WH

    Honeywell’s Request-to-Exit (RTE) sensors offer basic and full-featured models to suit every access control application. The quick-install sensors are extremely flexible, provide a generous amount of wiring room and contain built-in internal “tamper proof” shutters to enable precise target area detection.

    IS310BLTP (5-531-395-02) Trim Plate for IS310 and IS320 - Black
    Honeywell IS310WHTP (5-531-395-01) Trim Plate for IS310 and IS320 - White Honeywell IS320BL (0-000-361-04)  Fully Featured RTE - Black
    IS310WHTP (5-531-395-01) Trim Plate for IS310 and IS320 - White THIS IS THE REPLACEMENT FOR NC-NCIPIR2BK

    IS320BL (0-000-361-04) Fully Featured RTE - Black
    Honeywell’s Request-to-Exit (RTE) sensors offer basic and full-featured models to suit every access control application. The quick-install sensors are extremely flexible, provide a generous amount of wiring room and contain built-in internal “tamper proof” shutters that provide precise target area detection.

    Features
  • Adjustable relay time (0.5 - 64 seconds)
  • Micro-based signal processing
  • Adjustable “tamper proof” shutters which provide precise target area
  • Two Form C outputs
  • Swivel optics - allow for offset mounting
  • Patented black bug guard
  • Available in white or black
  • Piezo Sounder with volume control
  • Door contact input
  • Reader/keypad/keyswitch input
  • Remote arming and sounder inputs
  • Cover tamper
  • Honeywell IS320WH (0-000-361-03)  Fully Featured RTE - White NC-EGRESSK1 Pir/Request Exit Kit - NC-EGRESSK1
    IS320WH (0-000-361-03) Fully Featured RTE - White
    Honeywells Request-to-Exit (RTE) sensors offer basic and full-featured models to suit every access control application. The quick-install sensors are extremely flexible, provide a generous amount of wiring room and contain built-in internal tamper proof shutters that provide precise target area detection.
    Features
  • Adjustable relay time (0.5 - 64 seconds)
  • Micro-based signal processing
  • Adjustable tamper proof shutters which provide precise target area
  • Two Form C outputs
  • Swivel optics - allow for offset mounting
  • Patented black bug guard
  • Available in white or black
  • Piezo Sounder with volume control
  • Door contact input
  • Reader/keypad/keyswitch input
  • Remote arming and sounder inputs
  • Cover tamper

    THIS IS THE REPLACEMENT FOR NC-NCIPIR2BK

  • NC-EGRESSK1 Pir/Request Exit Kit - NC-EGRESSK1


    Includes PIR (NCIPIR) and egress button (EXB-1)

    NC-RTE6PKBK Reqeust To Exit PIR 6PCK Black - NC-RTE6PKBK Optex CX-502 50' X 50' Commercial PIR - CX502
    NC-RTE6PKBK Reqeust To Exit PIR 6PCK Black - NC-RTE6PKBK

    Optex CX-502 50' X 50' Commercial PIR - CX502


    The Optex CX-502 is a 50 ft x 50 ft motion detector

       
     
    Request-to-Exit PIR.  The RTE-PIR is passive infrared exit detector to provide hands-free exit activation.
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please