You are here: Home > Audio / Video > Residential Accessories
We found 38 results matching your criteria.
Residential Accessories: Cables, Controls, Mounts etc.
Sort By:
Page of 4
Crown Audio 1-VCAP Wall VCA Remote Control Crown Audio 1VCAP Single Wall-Mount Panel Potentiometers (Provide Remote Control)
Used in conjunction with a VCA-MC module, these single-gang, wall-mounted panels provide remote volume control for one or more CTs amplifier channels (for any CTs multi-channel model). The 1-VCAP is a 1-gang panel with one potentiometer, and the 4-VCAP is a 2-gang panel with four potentiometers (for any CTs multi-channel model) The potentiometer(s) on the panel are wired directly to one of the VCA connectors on the VCA-MC. The 1-VCAP and 4-VCAP Wall-mounted Panels provide remote volume control for one or more VCA-controlled channels. The 1-VCAP is a 1-gang panel with one potentiometer, and the 4-VCAP is a 2-gang panel with four potentiometers.

The potentiometers on the panel are wired directly to the VCA connectors on the VCA-MC module accessories for CTs 4- and 8-channel amplifiers, or to the VCA connections on Commercial Audio Series products.

  • Independent remote level control for each channel.
  • 4-pin removable Phoenix-style barrier connectors provide the +10VDC control voltage, ground, and control lines for two amplifi er channels.
  • Optional wall-mount level control panels for use with VCA modules: 1-VCAP and 4-VCAP.
  • A VCA-MC module provides independent remote level control for each channel. 4-pin removable Phoenix-style barrier connectors provide the +10VDC control voltage, ground, and control lines for two amplifi er chassis. Thus, the 4-channel CTs 4200 uses two connectors; the 8-channel CTs 8200 uses four connectors.
  • Crown CTs 4200 and 8200 amplifiers can be supplied with a VCA-MC module already factory-installed, or your choice of MC modules can be easily added to the amplifier by any authorized Crown Service Center.
  • Mounted on a single gang wall plate
  • Fits into a single gang electrical box
  • Great sounding remote volume control, using low cost easy-to-install "twisted pair" wiring

    Specifications:

  • Number of Potentiometers: 4
  • Potentiometer Resistance: 5 k ohms
  • Pins: VCA, GND, +10V (x4)
  • Weight: 6.5 oz (184 g)
  • Dimensions: 4-1/2 in x 4-1/2 in (11.4 cm x 11.4 cm) (Fits into a 2-gang electrical box.)
  • Crown Audio 4VCAP Wall-Mount Panel Potentiometers (Provide Remote Control) Crown Audio T170V Wall VCA Remote Control
    The 1-VCAP and 4-VCAP Wall-mounted Panels provide remote volume control for one or more VCA-controlled channels. The 1-VCAP is a 1-gang panel with one potentiometer, and the 4-VCAP is a 2-gang panel with four potentiometers.

    The potentiometers on the panel are wired directly to the VCA connectors on the VCA-MC module accessories for CTs 4- and 8-channel amplifiers, or to the VCA connections on Commercial Audio Series products.

    This is a two gang panel with four potentiometers that provide remote volume control for four or more CT's amplifier channels. The potentionmeters on the panel are wired directly to the VCA connectors on the VCA-MC.

    4-VCAP: This is a two-gang panel with four potentiometers that provide remote volume control for four or more CTs amplifier channels. The potentiometers on the panel are wired directly to the VCA connectors on the VCA-MC.

  • Independent remote level control for each channel.
  • 4-pin removable Phoenix-style barrier connectors provide the +10VDC control voltage, ground, and control lines for two amplifi er channels.
  • Optional wall-mount level control panels for use with VCA modules: 1-VCAP and 4-VCAP.
  • A VCA-MC module provides independent remote level control for each channel. 4-pin removable Phoenix-style barrier connectors provide the +10VDC control voltage, ground, and control lines for two amplifi er chassis. Thus, the 4-channel CTs 4200 uses two connectors; the 8-channel CTs 8200 uses four connectors.
  • Crown CTs 4200 and 8200 amplifiers can be supplied with a VCA-MC module already factory-installed, or your choice of MC modules can be easily added to the amplifier by any authorized Crown Service Center.

    Specifications:

  • Number of Potentiometers: 4
  • Potentiometer Resistance: 5 k ohms
  • Pins: VCA, GND, +10V (x4)
  • Weight: 6.5 oz (184 g)
  • Dimensions: 4-1/2 in x 4-1/2 in (11.4 cm x 11.4 cm) (Fits into a 2-gang electrical box.)
  • A single autoformer that provides the same impedance matching capability as the TP-170V, for a single channel. The T-170V is ready to be mounted in a rack, or enclosed in a metal box.

    Provides 100V output in Dual mode when used with CTs 600, CTs 1200, CTs 4200 and CTs 8200 amplifiers
    Allows amplifiers without direct Constant-Voltage capability to be easily integrated into distributed systems
    Hi-Fi by HAI 62A00-2 4 Zone, 4 Source Kit for structured wiring enclosures HAI 62A01-1 Main Assembly (4 Zone, 4 Source)
    Hi-Fi by HAI 62A002 4 Zone, 4 Source Kit

    (Standalone, Omni family or Lumina family home control systems)
    Hi-Fi Main Board Assembly with 4 installed Zone Amplifier Cards in an Enclosure. Also comes with 4 Remote Input Modules (RIM), 4 Volume-Source Controls (VSC), Power Supply, Remote Control, and a cable for an HAI Omni Home Control System or Lumina Lighting Control System.

    This 4 zone, 4 source kit is available for structured wiring enclosures using HAI Part Number 62A00-2.

    HAI 62A011 Main Assembly (4 Zone, 4 Source)

    The Board and Amplifier only version of the 62A00-2. It includes the Hi-Fi Main Assembly with 4 installed Zone Amplifier Cards.

    HAI 62A05-1 Remote Control HAI 62A06-1 Programmable Remote Control

    HAI 62A05-1 Remote Control


    Our Price : $27.00

    Remote Control for Volume-Source Control. Remote Control for Volume-Source Control with programmable source control functions
    HAI 62A09-1 Vented Enclosure HAI 62A13-1 Hi-Fi by HAI Retractable Cables 4' 3.5 mm male to 2 RCA male patch
    Enclosure for Hi-Fi with vents; door latch. HAI 62A131 Hi-Fi by HAI Retractable Cables
    3.5 mm male to 2 RCA male patch cable. Extends to 4 feet. Use to connect TV's, CD players, home theater and stereo components to HI-Fi's RIM.
    M&S AWPM Audio Input Wall Plate (White) M&S By Linear AWP Audio Input Wall Plate (White)
    The Model AWPM Audio Input Wall Plate (White) is a monaural audio input wall plate for use with MC111M and MC111DM Communication System Master units. The wall plate provides an audio termination point for connection of an external music source to the Music/Communication System Master unit.

    The AWPM Audio Input Wall Plate has two pairs of color-coded left-right RCA jacks and two "Y" adapters to convert stereo inputs to monaural outputs. The wall plate and mounts in a single-gang J-box. The faceplate is white.
    Features
  • External audio input connection for MC111M and MC111DM
  • Communication System Master unit
  • Mounts in a single-gang J-box
  • White faceplate Two pairs of color-coded stereo RCA jacks Two "Y" adapters to convert stereo inputs to monaural outputs

    UNAVALABLE, DISCONTINUED BY MANUFACTURER WITHOUT REPLACEMENT.
  • The Model AWP Audio Input Wall Plate (White) is a stereo audio input wall plate for use with dmc1 or dmc3-4 Music/Communication System Master units. The wall plate provides an audio termination point for connection of an external music source to the Music/Communication System Master unit.

    The AWP Audio Input Wall Plate has two pairs of color-coded left-right RCA jacks and mounts in a single-gang J-box. The faceplate is white.
    Features

  • External audio input connection for dmc1 & dmc3-4
  • Music/Communication System Master unit
  • Mounts in a single-gang J-box
  • White faceplate
  • Two pairs of color-coded stereo RCA jacks
  •    
     
    Residential Accessories
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please