|
|
|
|
|
|
|
|
|
|
Optional wireless keypad can be installed to control bypass functions, clear alarms, and set user
passwords. If you purchase the optional wireless keypad, you can program the monitor in several ways. You can add up to
20 bypass passwords for facility staff, you can program the monitor to recognize up to 15 bypass tags, and you can set
the monitor to operate in either a fixed duration (non-latching) or continuous (latching) alarm mode.
|
The ProtecPoint door monitor is a detection device used primarily as a departure alarm, and is mounted near a door or an exitway. The monitor projects an RF (radio frequency) detection field around the exit. As a transponder (a wrist or asset tag) enters the field, it reacts to the field and emits a signal that is received by the monitor, which can then sound and display an alarm or activate a device. The ProtecPoint monitor can be used to:
-
alert staff if tagged residents or property approach a monitored exit,
-
open a locked door or activate other equipment if the monitor is connected to the lock or equipment, or
-
allow a resident or property through the exit if accompanied by a bypass tag (optional keypad required).
The monitor is easy to install and uses high-reliability RFID ( Radio Frequency IDentification) technology to ensure accurate detection. An optional wireless keypad can be installed to control bypass functions, clear alarms, and set user passwords.The door monitor works with light-weight wrist tags for residents, small asset tags for moveable property and bypass tags
for staff. If you purchase the optional wireless keypad, you can program the monitor in several ways. You can add up to
20 bypass passwords for facility staff, you can program the monitor to recognize up to 15 bypass tags, and you can set
the monitor to operate in either a fixed duration (non-latching) or continuous (latching) alarm mode.
|
|
|
|
|
|
|
|
|
|
|
|
|
ROAM ALERT ECO SURFACE MOUNT
|
Foil Bag (10 pack) AGEFB01-000
Heavy-duty foil bags to store one tag each.
|
|
|
|
|
|
|
|
|
|
|
|
RoamAlert AR2NR01-485 RS-485 Repeater
For use with the RoamAlert Elevator System (SR3L03E) to ensure noise from the elevator shaft is not propagated along the
RoamAlert network, or when the RS-485 network exceeds 4000 ft. in length. Also used to isolate diffi cult network segments.
|
RoamAlert AR3PT01-0RA Resident Locating & Missed Tag Pulse Alarm License
Software license to enable resident locating and missed tag pulse alarms.
|
|
|
|
|
|
|
|
|
|
|
|
RoamAlert AR3SI01-0RA Self-Install Server Bundle - Software ONLY
Includes: RoamAlert software and Network Manager (no PC). Installation and software configuration provided by dealer.
|
RoamAlert AR3TA01-00D Duress Tag/ Staff Bypass Tag (includes lanyard)
Includes: lanyard, one year warranty. For bypassing exits. Also enables distress calls when Distress Alarm Reporting License installed (AR3ST01-0RA).
|
|
|
|
|
|
|
|
|
|
|
|
|
The RoamAlert tag is the smallest and lightest tag on the market today. Attached with a sturdy locking strap, the tag emits a special signal every time it approaches a protected exit. For sites using resident locating. One year warranty. Wrist tag with TLM (includes strap)
|
The Door Controller monitors exits from a facility to prevent a resident from wandering. UL approvedIncludes: exciter antenna (for exits up to 20 ft. wide), keypad, two surface-mount door contacts, 24 V/1.5 A power adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
Access Keypad Kit AR3KY01030
Second keypad for exits that require bypass on both sides of the door.
|
ANN-6L 6-Zone Annunciator AGEAN01-060
Displays alarms (no ID information) for up to six Door Controllers.
|
|
|
