Home > Shop Brands > SECO-LARM >

 

SECO LARM SK-910R4 4-Channel Receiver. Compatible With All Seco-Larm Transmitters. Four Form-C Dry Relay Contacts Rated 8A At24Vdc - SECO LARM SK910R4
SECO LARM SK-910R4 4-Channel Receiver. Compatible With All Seco-Larm Transmitters. Four Form-C Dry Relay Contacts Rated 8A At24Vdc - SECO LARM SK910R4


 

Our Price : $49.45


Product Code: SECO LARM SK910R4

Qty:

Description Specifications
 
SECO LARM SK-910R4 4-Channel Receiver. Compatible With All Seco-Larm Transmitters. Four Form-C Dry Relay Contacts Rated 8A At24Vdc - SECO LARM SK910R4


SK-910R4 Four-Channel CODEBUMP Code-Hopping RF Receiver (Shunt/Momentary Operation)
Controls home automation functions, garage doors, alarm panels, etc., from up to 500 ft. Similar to SK-910R & SK-910R2 except with 4 RF outputs, independently programmable. Compatible with all SECO-LARM transmitters. Mode switch for easy programming. 4 LEDs, one per channel, indicate RF reception, learn mode, transmitter cleared, output type. Add optional plug-in extended range antenna: SK-91ERSD

Features
  • Use to control home automation functions, garage door openers, house lights, alarm control panels, motorized gates, lifts or other devices by remote control.
  • Patented CODEBUMP anti-codegrabbing technology (requires use of CODEBUMP transmitter).
  • Uses either fixed code (SK-919TD2A-U, SK-919TD1S-U, SK-919T4J, SK-919T1H, SK-919T2H, or SK-919T4H) or code hopping (SK-917T2A-U, or SK-917T4J) transmitters with up to 500 ft. range using standard antenna.
  • External extended range antenna optional. Plugs directly into receiver PC Board. If SECO-LARM SK-91ERSD (Dipole Antenna) is used, range will be up to 1200 feet. If the SECO-LARM SK-91ERSW (Discontinued Model Monopole Antenna) is used, range will be up to 800 feet.
  • Mode switch for easy transmitter learning.
  • Easily Code-learns up to 15 remotes per channel.
  • Stores codes safely in EEPROM for up to one year in case of power loss.
  • Four Form-C Dry Relay Contact (N.O./N.C./Common) Outputs. Each output rated 10 Amps at 24 VDC.
  • 4 Separate Channels / 4 Output Modes Each:
  • a. Timed Momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.)
  • b. Toggle (On/Off)
  • c. Latch (Output stays on until manually reset)
  • d. Continuous or Validity (Output for as long as signal is received)
  • All outputs are independently controlled. (i.e. Channel 1 can be toggle, Channel 2 can be one second momentary, etc.)
  • Note: If the timed momentary output is chosen for any channel, there will be only one time available for all channels. In other words, if a one-second output time is selected for one channel, then all other timed momentary outputs will be one second.
  • Size: 43/8" x 55/16" x 11/8" (111 x 135 x 28mm).
  • Four LEDs (One LED for each channel) to indicate RF reception, learn mode entered, transmitted learned, memory cleared.
  • Use to control the garage door, house lights, alarm control panel, or other functions that require momentary or shunt operation.
  • In addition, these revolutionary receivers have:
  • 1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
  • 2. HIGHER SENSITIVITY for greater operating distances.
  • 3. UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
  • 4. GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > SECO-LARM