Home > Shop Brands > SECO-LARM >

 

SECO LARM ENFORCER190 Compact, With Built-in Tamper Switch, Red Trigger Led, And Patented Yellow Turbulence Led For Easy Sensitivity Setting - SECO LARM ENFORCER190


SECO LARM ENFORCER190 Compact, With Built-in Tamper Switch, Red Trigger Led, And Patented Yellow Turbulence Led For Easy Sensitivity Setting - SECO LARM ENFORCER190


 

Our Price : $57.99


Product Code: SECO LARM ENFORCER190

Qty:

Description Specifications
 
SECO LARM ENFORCER190 Compact, With Built-in Tamper Switch, Red Trigger Led, And Patented Yellow Turbulence Led For Easy Sensitivity Setting - SECO LARM ENFORCER190


The ENFORCER 190/190S includes SECO-LARM's unique patented Yellow turbulence LED. This LED flashes when environmental noise is high enough to cause false alarms, thereby allowing instant sensitivity setting without the use of a special external test meter. To set sensitivity, hold a thin flexible plastic ruler flat against a glass window within the unit's protection range. Pick up one end of the ruler while holding the other end down, and then let the ruler snap against the glass window. This should cause the Yellow LED to come ON, but the Red LED should not light. If the Red LED comes ON with a slight snap, the ENFORCER 190/190S may be too sensitive, and the sensitivity control should be turned counterclockwise with a small flat or phillips screwdriver. If the Yellow LED does not come ON, sensitivity should be increased by turning the control clockwise. Continue snapping the ruler on the window until the Yellow LED comes ON but the Red LED does not. Repeat this process with each window to ensure the ENFORCER 190/ 190S is set for every pane of glass. When the correct sensitivity is found using the above procedure, determine whether the sensitivity is high enough to trigger the alarm by snapping the ruler harder to simulate a break-in. If the Red LED does not come ON, the sensitivity must be increased

Features
  • Use either Terminals 2 and 3 N.O. output or 2 and 1 for N.C. output, but not both
  • Close all doors and windows when the Enforcer 12VDC Hard Wired Glass Break Sensor is in use
  • Mount any optional memory buzzer, musical device or any sound generating equipments as far from the sensor as possible to reduce the detector's chance of accidental triggering, and reducing the chance of a thief finding it
  • 25 foot radius if ceiling mounted, 45 foot radius if wall mounted
  • Enforcer 12VDC Hard Wired Glass Break Sensor
  • Mounting screws
  • Owner's Manual
  • Recognizes the audio pattern of glass breaking to trigger your security system
  • Adjustable sensitivity technology eliminates false alarms
  • Up to a 45' coverage radius
  • Tamper proof case

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > SECO-LARM
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please