|
|
|
|
|
|
|
|
|
|
ADEMCO’s series of hold-up devices have been designed for silent operation. Available in a stainless steel cover or hardwired, V-Plex and wireless versions, they mount quickly and easily in discreet locations. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification. Features: Double-pole double-throw contacts for multi-notifications Switch design provides totally silent operation Twin 45° screw terminals with EOL resistor splicing terminal Adhesive pads for temporary positioning prior to screw mounting Operating temp: 14˚ F to 140˚ F Listed for UL636 Hold-Up alarm units and systems Dimensions: 3-1/2" L x 2" W x 1-1/4" D
|
ADEMCO’s series of hold-up devices have been designed for silent operation. Available in a stainless steel cover or hardwired, V-Plex and wireless versions, they mount quickly and easily in discreet locations. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification. Features: - Silent operation
- Double-pole double-throw contacts for multi-notifications
- Twin 45° screw terminals with EOL resistor splicing terminal
- Adhesive pads for temporary positioning while installing
- Stainless steel cover
- Fully supervised
- Convenient reset key for testing and/or reset of alarm
|
|
|
|
|
|
|
|
|
|
|
|
|
Features: Completely concealed for attractive installations 3/4" Diameter switch with 3/8" diameter magnet for easier wiring Standard gap: 3/4" (19mm) Press fit design is quick and easy Packaged complete with wire crimps Convenient 5 foot zip cord leads are standard and save time and money Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC Color: White
|
Introducing Honeywell’s exclusive Staggered “T” Terminal Contacts. The staggered design means larger screw terminals and easier wiring. Exclusive Staggered “T” terminals eliminate splice, solder and tape and are compatible with standard size screwdrivers. Features: 3/4" diameter recessed contact for steel doors Standard gap: 1/2" in steel Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC Color: White
|
|
|
|
|
|
|
|
|
|
|
|
|
Introducing Honeywell’s exclusive Staggered “T” Terminal Contacts. The staggered design means larger screw terminals and easier wiring. Exclusive Staggered “T” terminals eliminate splice, solder and tape and are compatible with standard size screwdrivers.Features: Broad face plunger distributes impact more evenly Also available with leads (955PS) Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC Color: White
|
Features: Wide range of applications: windows, bell boxes, control cabinets Protect air conditioners or other valuable appliances (use 952 surface mount adapter) Extendible range for plunger with adjustment screw (included) Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC Color: White
|
|
|
|
|
|
|
|
|
|
|
|
|
Introducing Honeywell’s exclusive Staggered “T” Terminal Contacts. The staggered design means larger screw terminals and easier wiring. Exclusive Staggered “T” terminals eliminate splice, solder and tape and are compatible with standard size screwdrivers. Features: Shorter body for easier recess fit Full 360° activation Staggered T terminals ensure a secure electrical connection Also available with leads (956RP) Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC Color: Brown
|
The 968XTP Maximum Security Magnetic Switch is intended to monitor the open or closed position of moveable assemblies such as doors, windows or machinery safety barriers, where an attempt to defeat the switch is a concern. The 968XTP High Security Contact provides maximum security for protection of safes, vaults and other high security applications. Utilizing balanced magnetic contacts, the 968XTP is highly defeat resistant. In addition, internal circuitry provides 2400VDC of surge protection and has numerous design features that make it easy to install, and aid in reducing false alarms. Features: Balanced magnetic switch for protection of safes, vaults and other high-security applications Extra Transient Protection (XTP) withstands surges up to 2400VDC Tamper protection Suitable for indoor/outdoor use Attack resistant steel jacketed cable Orientation guides for easy installation Adjustable mounting height with spacers UL and cULus listed Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 25ma @ 24VDC 3 ft Stainless Steel Armored Cable Tamper Rating: 1 Amp @ 24VDC Gap: 7/16 inches (11mm) Surge Protection: Up to 2400VDC
|
|
|
|
|
|
|
|
|
|
|
|
|
Outdoor Quad Photo Beam (820 ft. Outdoor, 1640 ft. Indoor) Indoor/Outdoor use Quad Beam - Pulsed Infrared Lightning & Surge Protection 99.5% Beam Blocking Stability Selectable Environmental Disqualification (DQ) Circuit/AB-Q models Visual (LED) & Form C Relay Output for Remote Verification of DQ Circuit Status Adjustable Beam Response Sensitivity Integral Tamper Switch 820 ft. Outdoor
- 1640 ft. Indoor 13 ºF to 131 ºF Operation 10.5 to 30 VDC or 9 to 20 VAC Optional Heater for Cold Climates
|
The 5800SS1 Wireless Shock Sensor mounts directly on glass surfaces. It provides excellent detection for all types of glass while eliminating false alarms and is intended for use with ADEMCO’s 5800 wireless systems only. The 5800SS1 is especially effective in acoustically hard, reverberant rooms like kitchens, bathrooms and laundry rooms that are prone to false alarms. Since it is a shock sensor, the 5800SS1 is immune to the sounds that cause false alarms. Installation is a snap, just pull the battery tab to enroll the transmitter, peel the adhesive backing and mount. There’s no need to open the case for any reason except to change the battery years later. Honeywell's 5800SS1 Wireless Shock Sensor has been designed to mount directly on the glass surface and offers excellent protection for all glass types—including plate, tempered, laminated and wired. Features: -
Effective in acoustically hard areas such as kitchens, bathrooms, skylights and occupied areas -
Mounts directly to glass surfaces with 3M™ adhesive tape -
Mounts quickly and easily without having to remove the cover -
Protects all types of glass -
No adjustments required -
Quick and easy installation–simply pull the battery tab to enroll the transmitter, peel the ad Specifications: - Glass Coverage:
- Plate, laminated, wired, sealed insulated, coated and tempered, up to 1/4 inches, (6.35mm) thick
- 10 ft (3m) distance from mounting location
- One sensor is required for each separate pane of glass - Dimensions: 1.6 inches H x 1.6 inches W x 0.8 inches D (41mm x 41mm x 20mm)
- Power: Single 3V Panasonic CR2, Sanyo CR2, or Duracell DLCR2 lithium battery
- Operating Temperature: 0°F to 130°F (-18°C to +55°C)
- Compatibility: Use with all Vista control panels that support 5800 Series wireless devices
|
|
|
|
|
|
|
|
|
|
|
|
|
Manufactured with gold, silver and copper for maximum conductivity and corrosion resistance, with a current rating of 10 amps, and a voltage rating of 125/250 volts. Recessed button prevents accidental activation, and latching switches have a reset tool included. Use to trigger a silent alarm and activate cameras and equipment, all with the same switch.
|
Manufactured with gold, silver and copper for maximum conductivity and corrosion resistance, with a current rating of 10 amps, and a voltage rating of 125/250 volts. Recessed button prevents accidental activation, and latching switches have a reset tool included. Use to trigger a silent alarm and activate cameras and equipment, all with the same switch.
|
|
|
