You are here: Home > Shop Brands > Silent Knight by Honeywell
We found 298 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Silent Knight by Honeywell

  Accessories
  Addressable Fire Alarm Control Panels
  Conventional Fire Alarm Control Panels
  Digital Recievers
  Fire Alarm Communicators
  Fire Alarm Power Supplies
  Fire Pull Stations
  Voice Evacuation Control Panels

Silent Knight

Accessories
Addressable Fire Alarm Control Panels
Conventional Fire Alarm Control Panels
Digital Recievers
Fire Alarm Communicators
Fire Alarm Power Supplies
Fire Pull Stations
Voice Evacuation Control Panels
Sort By:
Page of 25
GE 60756 Combo Input/Output Snapcard:  3 Hardware Inputs, 1 Two-Wire Smoke, 2 Form C-Relay Outputs, 2K OHM Resistors Silent Knight 5860 Remote Annunciator - Gray

Add hardwire input and output devices to Concord panels in a snap with this combination expansion card. The SnapCard is plugged right into the control panel so there's no need to mount it on the wall and then wire it to the panel.

  • One 12V two-wire smoke detector loop that provides power to
  • Class B smoke detectors
  • Three supervised hardwire UL fire-rated zones
  • False alarm prevention via alarm verification for fire points
  • Model 5860 Remote Annunciator

    The 5860 is designed to look and operate exactly the same as the built-in annunciator. Features include an 80-character backlit LCD providing easy-to-understand system messages. The annunciator is ergonomically designed with over-sized buttons for the most frequently used features, Reset and Silence.

    In addition to status messages displayed on the LCD, five LEDs for alarm, supervisory, trouble, silence, and AC power indicate status. The annunciator is available in gray to match virtually any decor and red for applications where the annunciator must stand out. The annunciator enclosure can be surface or flush-mounted. A trim ring kit is available for surface mounting.

    Operation
    When the system is normal and receiving AC power, the Power LED is lit and all other LEDs are off. Other LEDs turn on as the conditions occur. Users identify themselves to the control panel by entering a code on the annunciator or by turning the firefighter’s key. When a user presses a button, the annunciator piezo beeps and the LCD prompts the user to enter a code or other relevant information. Multiple users can work at different annunciators simultaneously without affecting each other.

    Features

    • 80-character display

    • Tactile / audible feedback

    • Accepts user codes or firefighter’s key.

    • RS-485 interface to panel

    • Can be flush- or surface-mounted. Trim ring available for surface-mounting.

    • Operation and appearance identical to on-board annunciator

    • Supports simultaneous use by multiple users

    • UL Listed, complies with NFPA 72 5860 Remote Annunciator

    Specifications

    Operating Voltage: 24 VDC

    Standby Current: 20 mA

    Alarm Current: 25 mA

    Max. per system 8

    Ambient Temperature: 32°F to 120°F (0°C to 49°C)

    Mounting: Surface or flush

    Wiring distance from IntelliKnight panel Up to 6,000 feet (depending on wiring method)

    Dimensions: Height: 7-3/8”

    Width: 9-1/8”

    Depth: 1-1/2”

    Colors: Lt. gray (5860) Red (5860R)

    Downloads:

    Silent Knight 5860R Remote Annunciator - Red Silent Knight 5865-3 Remote LED Annunciator

    Model 5860R Remote Annunciator

    The 5860 is designed to look and operate exactly the same as the built-in annunciator. Features include an 80-character backlit LCD providing easy-to-understand system messages. The annunciator is ergonomically designed with over-sized buttons for the most frequently used features, Reset and Silence.

    In addition to status messages displayed on the LCD, five LEDs for alarm, supervisory, trouble, silence, and AC power indicate status. The annunciator is available in gray to match virtually any decor and red for applications where the annunciator must stand out. The annunciator enclosure can be surface or flush-mounted. A trim ring kit is available for surface mounting.

    Operation
    When the system is normal and receiving AC power, the Power LED is lit and all other LEDs are off. Other LEDs turn on as the conditions occur. Users identify themselves to the control panel by entering a code on the annunciator or by turning the firefighter’s key. When a user presses a button, the annunciator piezo beeps and the LCD prompts the user to enter a code or other relevant information. Multiple users can work at different annunciators simultaneously without affecting each other.

    Features

    • 80-character display

    • Tactile / audible feedback

    • Accepts user codes or firefighter’s key.

    • RS-485 interface to panel

    • Can be flush- or surface-mounted. Trim ring available for surface-mounting.

    • Operation and appearance identical to on-board annunciator

    • Supports simultaneous use by multiple users

    • UL Listed, complies with NFPA 72 5860 Remote Annunciator

    Specifications

    Operating Voltage: 24 VDC

    Standby Current: 20 mA

    Alarm Current: 25 mA

    Max. per system 8

    Ambient Temperature: 32°F to 120°F (0°C to 49°C)

    Mounting: Surface or flush

    Wiring distance from IntelliKnight panel Up to 6,000 feet (depending on wiring method)

    Dimensions: Height: 7-3/8”

    Width: 9-1/8”

    Depth: 1-1/2”

    Colors: Lt. gray (5860) Red (5860R)

    Downloads:

    SK-58653

    Model 5865-3 and 5865-4 LED Fire Annunciators

    IntelliKnight's LED Fire Annunciator modules are the cost effective alternative to remote annunciation.

    The 5865-3 and 5865-4 LED annunciators provides the most cost effective and convenient means of remote annunciation.  You can use up to eight 5865 series annunciators on one IntelliKnight Control Panel.

    The 5865 series annunciators  provide you with 30 programmable LED (15 red, 15 yellow) for maximum flexibility.  The 5865-3 and 5865-4 fit into a standard 3- or 4-gang electrical box; covered by semi-transparent labels and an eye-pleasing cover plate.

    The 5865-3 provides alarm and trouble annunciation for 15 zones while the 5865-4 adds reset and silence input switches for even more versatility.

    Downloads:

    5865 LED Remote Annunciator Spec Sheet (1.65M PDF file)

    Silent Knight 5865-4 Remote LED Annunciator Silent Knight SK-Duct System Sensor Addressable Photoelectric Duct Detector
    SK-58654

    Model 5865-3 and 5865-4 LED Fire Annunciators

    IntelliKnight's LED Fire Annunciator modules are the cost effective alternative to remote annunciation.

    The 5865-3 and 5865-4 LED annunciators provides the most cost effective and convenient means of remote annunciation.  You can use up to eight 5865 series annunciators on one IntelliKnight Control Panel.

    The 5865 series annunciators  provide you with 30 programmable LED (15 red, 15 yellow) for maximum flexibility.  The 5865-3 and 5865-4 fit into a standard 3- or 4-gang electrical box; covered by semi-transparent labels and an eye-pleasing cover plate.

    The 5865-3 provides alarm and trouble annunciation for 15 zones while the 5865-4 adds reset and silence input switches for even more versatility.

    Downloads:

    5865 LED Remote Annunciator Spec Sheet (1.65M PDF file)

    The SK-Duct Intelligent photoelectric duct smoke detector is for use with IntelliKnight series fire alarm control panels (FACPs). The SK-Duct features a pivoting housing that is flexible enough to fit configurations from square to rectangular. It features low-flow technology that enables duct smoke detection throughout a broad range of airflow environments. Many difficult to solve HVAC applications occur in low airflow duct applications where reliable smoke detection is critical. Thie duct detector can detect smoke at air speed velocities of 100 feet per minute or greater, while continuing the same reliable performance to 4000 feet per minute.

    The Model SK-Duct Air Duct Smoke Detector utilizes photoelectric technology for the detection of smoke. It provides early detection of smoke and products of combustion present in air moving through HVAC ducts in Commercial and Industrial applications. The SK-Duct is in a heavy duty gray steel back box with a clear cover. It features a pivoting housing that fits both square and rectangular footprints capable of mounting to a round or rectangular duct. It installs quickly and easily. The unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4000 feet per minute, temperatures of -4°F to 158°F, and a humidity range of 0 to 95 percent (non-condensing).

    Wheelock CA-622-1 - Common Audible Control Units - 6 CO Line HAI 32A30-4 Touchscreen Hub with No Video Encoder with Structured Mounting Plate
    CA Common Audible Control Units monitor multiple analog telephone lines (tip and ring) to provide all call signaling, zoned signaling or night bell connection. These control units also enable connection for operation of external audible or visual alerts to be operated directly off the telephone ring voltage output.

    Available features and options:
    * UL Listed
    * Enables key systems to have a dry contact closure to trigger other devices
    * Easy connection to Cooper Wheelock dry contact interface
    * Choice of two outputs for alert signal connections: standard ringing voltage or contact closure

    The Touchscreen Hub is available in an HAI enclosure (same as used on Omni IIe and OmniPro II) or on the Universal Mounting Plate for installation in Structured Wiring enclosures. It is supplied with a switching power pack and uses two standard sealed, rechargeable security batteries (not supplied). The Touchscreen Hub supports up to eight OmniTouch 5.7, OmniTouch, or OmniTouch with Video touchscreens. A video encoder for the Touchscreen Hub is no longer available. If you wish to view video on an HAI Touchscreen, your options are as follows:

    You must use one of HAI's IP-based Touchscreens, such as an OmniTouch 5.7e. You may use IP Cameras that provide jpg or mjpg output or Analog Cameras that are connected to an HAI Camera Server.

    The Touchscreen Hub provides battery backed power for multiple touchscreens, cameras and the Video Encoder. It has convenient connections and power terminals for a neat installation. There are inputs for six individual cameras, which can be selected by the touchscreens for viewing. Six individual outputs allow the cameras to also be viewed on monitors, TV sets, video recorders, etc. HAI designed the Hub to eliminate the unsightly and unreliable "wall wart" transformers, power strips, "Y" connectors, external power supplies, battery back up units and complex wiring normally associated with camera and Touchscreen installations. In addition to simplifying the installation, the power supply has low voltage cut out and automatically sequences the start up of Touchscreens for long term reliability and zero maintenance. The batteries are recharged automatically.
    Panasonic BTI KX-T7740 Panasonic DSS Console - White Silent Knight 005496CB Cabinet for the 5496 Panel
    - 48-Button DSS console
    - 16 Programmable CO keys
    - 48 DSS/BLF keys
    - Volume keys for speaker and headset
    - Wall mountable

    KXT7740
    Buy now and take advantage of our low prices and great services for Silent Knight 005496CB Cabinet for the 5496 Panel.
    Silent Knight 052080 PC Board for 5208 Silent Knight 161102 Smoke Detector with Heat Sensor SLR-24H
    Buy now and take advantage of our low prices and great services for Silent Knight 052080 PC Board for 5208. Buy now and take advantage of our low prices and great services for Silent Knight 161102 Smoke Detector with Heat Sensor SLR-24H.
       
     
    Silent Knight by Honeywell
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please