The Pull Station Back Box (PSB) is a two (2) piece unit that allows the installer to mount a standard Fire Alarm Manual Pull Station to a typical Aluminum or Steel framed glass wall. The two piece unit is manufactured of tough 16 gauge CRS and is painted Red, White, Black or Bronze and has a “FIRE” sticker that once applied can be seen through the glass alerting passers-by of the presence of this Life Safety device. The back unit has a standard “device mount” hole spacing and an oversized wiring pull through hole; while the front cover has an industry standard "Single Gang" mounting configuration to facilitate most Manual Stations’ mounting requirements.
- Convenient two piece construction
- Red, White, Black and Bronze color
- “FIRE” Sticker supplied for each unit
- 16 Gauge CRS construction made in the USA
- Oversized design for ample wiring space and Addressable Point Module mounting
The Space Age Electronics PSB is a 6 High x 4.5 Wide x 1.5 Deep, 2 piece assembly that allows for the proper installation of a Manual Pull Station, or other such device that maintains a Single Gang mounting footprint, to the side of a steel or aluminum channel framed glass wall.
The PSB has a .835 hole to route wiring through and two double mounting holes used to secure the back box to the frame. The spacing of the two mounting holes that secure the PSB back box to the wall framework is 3.87 or the standard single gang device mount spacing. Double mounting holes keep the space between the PSB and the glass to a minimum.
The mounting for the Manual Pull Station is standard single gang device mount spacing.
The back box comes in Red, White, Black and Bronze colors and is supplied with 4 6x32 screws for securing the front cover to the back of the unit (4 threaded holes, 2 on the top edge and 2 along the bottom). The Manual Station (or other device) is secured by two 6x32 screws into threaded inserts on the front cover.
The PSB is made of 16 gauge CRS and Powder Coat Painted for durability at Space Age Electronics, Inc.