|
|
|
|
|
|
|
|
|
|
GE Security's Recessed Mount Magnetic Contacts are designed for use in installations where a small, sealed unit is required. The reed switch is totally encapsulated in GE Security's exclusive polyurethane potting compound. Perfect for window screen protection Versatile compact size Attractive, added security of recessed installation
|
GE Security's Recessed Mount Magnetic Contacts are designed for use in installations where a small, sealed unit is required. The reed switch is totally encapsulated in GE Security's exclusive polyurethane potting compound. Perfect for window screen protection Versatile compact size Attractive, added security of recessed installation
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1125TWM Stubby Press Fit with terminal connections is a 3/8 in dia. switch designed specifically for applications where space is limited. The short length makes it ideal for thin-framed windows and doors where longer units cannot be used. Small size Terminal wire connection Ideal for pre-wire installations Wide Gap
|
The 1125T Stubby Press Fit Magnetic contact is designed specifically for applications where space is limited. The contact’s short length makes it ideal for thin-framed windows and doors where longer units cannot be used. The terminal connection adds to ease of installation. Simply strip the wire, insert it into the terminal block, and tighten. The terminal accepts any wire size from 14 to 22 gauge and has a special one-piece construction for added strength and durability. A wide gap model is available to protect against false alarms from loose-fitting doors and windows. Drastically reduces installation time Ideal for pre-wire installations Terminals accept 14 to 22 gauge wire Available wider gap distance helps prevent false alarms caused by loose-fitting doors and windows
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1125 Series Stubby Press Fit Magnetic Contact is a 3/8-inch diameter switch designed specifically for applications where space is limited. The 1125’s short length makes it ideal for thin-framed windows and doors where longer units cannot be used. Press fit ribs on the housing make installation quick and easy. Press fit design makes installation easy—no screws or glue needed Small size perfect for thin-framed windows and doors Good for use in vinyl-clad and custom windows Ideal for pre-wiring; eliminates forcing switch and pre-wire into the same header hole Available wider gap distance helps prevent false alarms caused by loose-fitting doors and windows
|
The 1225-N 3/8" Dia. "Stubby Wing Fit" Wide Gap Magnetic Contact is a shortened version of the popular 1275 series. The 1225 Series 3/4" depth is designed for tight applications where space is a premium, making it perfect for vinyl-clad windows. When the contact is installed, the wings are compressed. The wings then flex to hold the contact securely in place and protect the contact reed from being crushed by swelling wood. The 1225-N contact is made of flame-retardant polypropylene. 3/4" length Perfect for vinyl windows "Wings" protect contact reed from being crushed by swelling wood Installs quickly in over drilled holes Superior false alarm immunity 1/2" gap
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1225-N 3/8" Dia. "Stubby Wing Fit" Wide Gap Magnetic Contact is a shortened version of the popular 1275 series. The 1225 Series 3/4" depth is designed for tight applications where space is a premium, making it perfect for vinyl-clad windows. When the contact is installed, the wings are compressed. The wings then flex to hold the contact securely in place and protect the contact reed from being crushed by swelling wood. The 1225-N contact is made of flame-retardant polypropylene. 3/4" length Perfect for vinyl windows "Wings" protect contact reed from being crushed by swelling wood Installs quickly in over drilled holes Superior false alarm immunity 1/2" gap
|
The 1225WN 3/8" Dia. "Stubby Wing Fit" Wide Gap Magnetic Contact is a shortened version of the popular 1275 series. The 1225 Series 3/4" depth is designed for tight applications where space is a premium, making it perfect for vinyl-clad windows. When the contact is installed, the wings are compressed. The wings then flex to hold the contact securely in place and protect the contact reed from being crushed by swelling wood. The 1225WN contact is made of flame-retardant polypropylene. 3/4" length Perfect for vinyl windows "Wings" protect contact reed from being crushed by swelling wood Installs quickly in over drilled holes Superior false alarm immunity 1/2" gap
|
|
|
|
|
|
|
|
|
|
|
|
|
The 120T/4473 requires that a 3/4" hole be drilled for the switch and 3/8" hole for the magnet. The 3/4" switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections. Installation is further enhanced by using a smaller 3/8" diameter magnet to avoid the need to center a larger hole in a 1" to 1 1/2" thick door or window. This will allow you to offset the magnet should it be required. The 120T/4473 switch set was developed for and should only be used in openings with wooden or aluminum frames. 120T/4473 Series Features Lifetime Warranty Available in closed loop, open loop and SPDT Wire leads or terminal blocks 12" leads Available with new rare earth Magnets Longer Leads, Zip Cords, or Jacketed Cable on Request Built-in Resistors and Diodes Available on Request Switches or Magnets are Available Separately Supervisory Loops Available
|
The 120T/4473 requires that a 3/4" hole be drilled for the switch and 3/8" hole for the magnet. The 3/4" switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections. Installation is further enhanced by using a smaller 3/8" diameter magnet to avoid the need to center a larger hole in a 1" to 1 1/2" thick door or window. This will allow you to offset the magnet should it be required. The 120T/4473 switch set was developed for and should only be used in openings with wooden or aluminum frames. 120T/4473 Series Features Lifetime Warranty Available in closed loop, open loop and SPDT Wire leads or terminal blocks 12" leads Available with new rare earth Magnets Longer Leads, Zip Cords, or Jacketed Cable on Request Built-in Resistors and Diodes Available on Request Switches or Magnets are Available Separately Supervisory Loops Available
|
|
|
|
|
|
|
|
|
|
|
|
|
The GRI 180 Series is the industry standard 3/4" diameter recessed steel door switch set with 12" leads. 180 Series Standard Features Lifetime Warranty Colors: White, Mahogany, Grey or Black UL and ULC Approved 180-12 & 184-12 UL 10C Fire Rated Available in Closed Loop, Open Loop and SPDT 3/4" and 1" Diameter Mounting Standard 12" Leads or Terminals Self-Locking Solid, One Piece Design 7/8" Diameter also Available - Call Factory Switches or Magnets are Available Separately Standard 1/2"+ Gap on Steel Wide Gap 1"+ Gap on Steel Supervisory Loops Available
|
180/184 Series Standard Features Lifetime Warranty Colors: White, Mahogany, Grey or Black UL and ULC Approved 180-12 & 184-12 UL 10C Fire Rated Available in Closed Loop, Open Loop and SPDT 3/4" and 1" Diameter Mounting Standard 12" Leads or Terminals Self-Locking Solid, One Piece Design 7/8" Diameter also Available - Call Factory Switches or Magnets are Available Separately Standard 1/2"+ Gap on Steel Wide Gap 1"+ Gap on Steel Supervisory Loops Available
|
|
|
