 |
 |
 |
|
The System Sensor CHSR is a SpectrAlert Red Selectable Output Chime Strobe from the SpectreAlert Advance series.
SpectrAlert
Advance selectable-output chimes and chime/strobes are rich with
features guaranteed to cut installation times and maximize profits.
SpectrAlert
Advance selectable-output chimes and chime/ strobes are private mode
notification appliances used to alert trained personnel to investigate
possible emergency situations and to take appropriate action. Security
guard and nurse workstations are ideal locations for chime products.
SpectrAlert
Advance chimes and chime/strobes are rich with features guaranteed to
cut installation times and maximize profits. The SpectrAlert Advance
Series of notification appliances is designed to simplify your
installations, with features such as plug-in designs, instant feedback
messages to ensure correct installation of individual devices, and seven
field-selectable candela settings for chime/ strobes.
More
specifically, when installing SpectrAlert Advance products, first attach
a universal mounting plate to a four-inch square, four-inch octagon,
single-gang, or double-gang junction box. Then, connect the notification
appliance circuit wiring to the SEMS terminals on the mounting plate.
Finally,
attach the chime or chime/strobe to the mounting plate by inserting the
product’s tabs in the mounting plate’s grooves. The device is rotated
into position, locking the product’s pins into the mounting plate’s
terminals. The device will temporarily hold in place with a catch until
it is secured with a captive mounting screw.
SpectrAlert Advance products allow you to choose:
- 12 or 24 volts
- At 24 volts, 15, 15/75, 30, 75, 95, 110, or 115 candela by way of rear-mounted slide switch and front view window
- Select chime tones and volume using a simple rotary switch
- Color: Red
- Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
- Candela: Selectable strobe settings of 15, 15/75, 30, 75, 95, 110, and 115 cd
- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- Wiring Gauge: 12 to 18 AWG
- Operating Temperature: 32°F to 120°F (0°C to 49°C)
- Humidity Range: 10 to 93% non-condensing
- Wall mount dimensions (including lens): 5.6"L × 4.7"W × 2.5"D (142 mm L × 119 mm W × 64 mm D)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design
- Shorting spring on mounting plate for pre-installation continuity check
- Captive mounting screw
- Torx screw for tamper resistance
- Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Minimal intrusion into the back box
- Rotary switch for tone selection
- Two volume settings
- Electrically compatible with existing SpectrAlert products
- Listed for ceiling or wall mounting
|
|
|
|
|
|
|
|
|
