 |
 |
 |
|
The System Sensor SpectrAlert Advance P2R-P is an unmarked, red,
two-wire horn strobe with selectable strobe settings of 15, 15/75, 30,
75, 95, 110 and 115 cd.
SpectrAlert Advance selectable-output
horns, strobes, and horn strobes are rich with features guaranteed to
cut installation times and maximize profits.
The SpectrAlert
Advance series offers the most versatile and easy-to -use line of horns,
strobes, and horn strobes in the industry. With white and red plastic
housings, wall and ceiling mounting options and plain and FIRE-printed
devices, SpectrAlert Advance can meet virtually any application
requirement.
Like the entire SpectrAlert Advance product line,
horns, strobes, and horn strobes include a variety of features that
increase their application versatility while simplifying installation.
All devices feature plug-in designs with minimal intrusion into the back
box, which make installations fast and foolproof while virtually
eliminating costly and time - consuming ground faults. Furthermore, a
universal mounting plate with an onboard shorting spring tests wiring
continuity before the device is installed, protecting devices from
damage.
In addition, field-selectable candela settings, automatic
selection of 12- or 24-volt operation, and a rotary switch for horn
tones with three volume selections enables installers to easily adapt
devices to suit a wide range of application requirements.
- Color: Red
- Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
- Candela: Selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- Wiring Gauge: 12 to 18 AWG
- Operating Temperature: –40°F to 151°F (–40°C to 66°C)
- Humidity Range: 10 to 93% non-condensing
- Wall mount dimensions (including lens): 5.6"L × 4.7"W × 2.5"D (142 mm L × 119 mm W × 64 mm D)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design with minimal intrusion into the back box
- Tamper-resistant construction
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Field-selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
- Horn rated at 88+ dBA at 16 volts
- Rotary switch for horn tone and three volume selections
- Universal mounting plate for wall and ceiling units
- Mounting plate shorting spring checks wiring continuity before device installation
- Electrically compatible with existing SpectrAlert products
- Compatible with MDL sync module
|
|
|
|
|
|
|
|
|
