 |
 |
 |
|
The System Sensor SpectrAlert Advance P2WK-P is an unmarked, white,
two-wire, outdoor horn strobe with selectable strobe settings of 15,
15/75, 30, 75, 95, 110 and 115 cd. Outdoor back box included.
SpectrAlert
Advance selectable-output horns, strobes, and horn strobes are rich
with features guaranteed to cut installation times and maximize profits.
The
SpectrAlert Advance series offers the most versatile and easy-to -use
line of horns, strobes, and horn strobes in the industry. With white and
White plastic housings, wall and ceiling mounting options and plain and
FIRE-printed devices, SpectrAlert Advance can meet virtually any
application requirement.
Like the entire SpectrAlert Advance
product line, horns, strobes, and horn strobes include a variety of
features that increase their application versatility while simplifying
installation. All devices feature plug-in designs with minimal intrusion
into the back box, which make installations fast and foolproof while
virtually eliminating costly and time - consuming ground faults.
Furthermore, a universal mounting plate with an onboard shorting spring
tests wiring continuity before the device is installed, protecting
devices from damage.
In addition, field-selectable candela
settings, automatic selection of 12- or 24-volt operation, and a rotary
switch for horn tones with three volume selections enables installers to
easily adapt devices to suit a wide range of application requirements.
- Color: White
- Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
- Candela: Selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- Wiring Gauge: 12 to 18 AWG
- Operating Temperature: –40°F to 151°F (–40°C to 66°C)
- Wall mount dimensions (including lens): 5.6"L × 4.7"W × 2.5"D (142 mm L × 119 mm W × 64 mm D)
- Weatherproof, wall-mount back box dimensions (SA-WBB): 5.7"L × 5.1"W × 2.0"D
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design
- Electrical compatibility with legacy SpectrAlert products
- Shorting spring on mounting plate tests continuity before installation
- Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4 , 1/2 , 1 and 2 watts)
- Ceiling- and wall-mount application
- Universal mounting plate for wall- and ceiling-mount units
- Weatherproof per NEMA 4X, IP56
- Compatible with System Sensor synchronization protocol
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Field-selectable candela settings on wall and ceiling units
|
|
|
|
|
|
|
|
|
