 |
 |
 |
|
The System Sensor SpectrAlert Advance P4RK is a red, four-wire, outdoor
horn strobe with selectable strobe settings of 15, 15/75, 30, 75, 95,
110 and 115 cd.
The SpectrAlert Advance series offers the
broadest line of outdoor speakers and speaker strobes in the industry.
From metal and plastic outdoor back boxes, to white and red plastic
housings, to wall and ceiling mounting options, SpectrAlert Advance can
meet virtually any application requirement.
SpectrAlert Advance
outdoor speakers and speaker strobes can be used indoors or outdoors in
wet or dry applications, and can provide reliable operation from -40°F
to 151°F. In addition, these speakers provide a broad frequency
response range, low harmonic distortion and maintain a high sound
pressure level at all tap settings to provide accurate and intelligible
broadcast of evacuation messages.
The entire SpectrAlert Advance
line, including speakers, provides a plug-in design that reduces ground
faults by enabling installers to pre-wire mounting plates and dress the
wires before plugging in the speakers. To enable faster installation
times, a shorting spring on the mounting plate provides instant feedback
to ensure that wiring is properly connected. Furthermore, rotary
switches simplify the selection of voltage and power settings. Both wall
and ceiling speaker strobes include field-selectable candela settings
that enable installers to quickly set each device to meet application
requirements.
The speakers’ weatherproof plastic back boxes
(shipped with product) and metal back boxes (available separately) are
designed to accommodate in-and-out wiring for daisy chaining outdoor
devices. Plastic back boxes feature removable side flanges and improved
resistance to saltwater corrosion. The screw-hole knock-outs located on
the back of the back box eliminate the need to drill holes for screw-in
mounting. Both weatherproof back boxes come with 3/4-inch top and bottom
conduit entries and 3/4-inch knock-outs at the back. Included with each
back box is a screw-in NPT plug with an O-ring gasket for a water tight
seal.
- Color: Red
- Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
- Candela: Selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- Wiring Gauge: 12 to 18 AWG
- Operating Temperature: –40°F to 151°F (–40°C to 66°C)
- Humidity Range: 10 to 93% non-condensing
- Wall mount dimensions (including lens): 5.6"L × 4.7"W × 2.5"D (142 mm L × 119 mm W × 64 mm D)
- Weatherproof, wall-mount back box dimensions (SA-WBB): 5.7"L × 5.1"W × 2.0"D
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design
- Electrical compatibility with legacy SpectrAlert products
- Shorting spring on mounting plate tests continuity before installation
- Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4 , 1/2 , 1 and 2 watts)
- Ceiling- and wall-mount application
- Universal mounting plate for wall- and ceiling-mount units
- Weatherproof per NEMA 4X, IP56
- Compatible with System Sensor synchronization protocol
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Field-selectable candela settings on wall and ceiling units
|
|
|
|
|
|
|
|
|
