 |
 |
 |
|
The System Sensor SpectrAlert Advance PC2R is a red, two-wire,
ceiling-mount horn strobe with selectable strobe settings of 15, 15/75,
30, 75, 95, 110 and 115 cd.
SpectrAlert Advance outdoor,
selectable-output speaker strobes and dual-voltage evacuation speakers
meet virtually any outdoor application requirement.
The
SpectrAlert Advance series offers the broadest line of outdoor speakers
and speaker strobes in the industry. From metal and plastic outdoor back
boxes, to white and red plastic housings, to wall and ceiling mounting
options, SpectrAlert Advance can meet virtually any application
requirement.
SpectrAlert Advance outdoor speakers and speaker
strobes can be used indoors or outdoors in wet or dry applications, and
can provide reliable operation from -40°F to 151°F. In addition, these
speakers provide a broad frequency response range, low harmonic
distortion and maintain a high sound pressure level at all tap settings
to provide accurate and intelligible broadcast of evacuation messages.
The
entire SpectrAlert Advance line, including speakers, provides a plug-in
design that reduces ground faults by enabling installers to pre-wire
mounting plates and dress the wires before plugging in the speakers. To
enable faster installation times, a shorting spring on the mounting
plate provides instant feedback to ensure that wiring is properly
connected. Furthermore, rotary switches simplify the selection of
voltage and power settings. Both wall and ceiling speaker strobes
include field-selectable candela settings that enable installers to
quickly set each device to meet application requirements.
The
speakers’ weatherproof plastic back boxes (shipped with product) and
metal back boxes (available separately) are designed to accommodate
in-and-out wiring for daisy chaining outdoor devices. Plastic back boxes
feature removable side flanges and improved resistance to saltwater
corrosion. The screw-hole knock-outs located on the back of the back box
eliminate the need to drill holes for screw-in mounting. Both
weatherproof back boxes come with 3/4-inch top and bottom conduit entries
and 3/4-inch knock-outs at the back. Included with each back box is a
screw-in NPT plug with an O-ring gasket for a water tight seal.
- Color: Red
- Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
- Candela: Selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- Wiring Gauge: 12 to 18 AWG
- Operating Temperature: –40°F to 151°F (–40°C to 66°C)
- Humidity Range: 10 to 93% non-condensing
- Ceiling mount dimensions (including lens): 6.8" diameter × 2.5" high (173 mm diameter × 64 mm high)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design with minimal intrusion into the back box
- Tamper-resistant construction
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Field-selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
- Horn rated at 88+ dBA at 16 volts
- Rotary switch for horn tone and three volume selections
- Universal mounting plate for wall and ceiling units
- Mounting plate shorting spring checks wiring continuity before device installation
- Electrically compatible with existing SpectrAlert products
- Compatible with MDL sync module
|
|
|
|
|
|
|
|
|
