 |
 |
 |
|
The System Sensor SpectrAlert Advance SPSR-P is an unmarked, red speaker
strobe for wall installation with selectable strobe settings of 15,
15/75, 30, 75, 95, 110 and 115 cd.
The new SpectrAlert Advance
selectable output speaker strobes and dual evacuation speakers can
reduce ground faults and allow faster installation.
The
SpectrAlert Advance Series of speakers and speaker strobes is designed
to reduce ground faults. The plug-in design allows the installer to
pre-wire mounting plates and dress the wires before plugging in the
speakers. The plastic cover prevents nicked wires by covering exposed
speaker components.
This design also allows faster installations
with instant feedback to ensure that wiring is properly connected,
rotary switches to select voltage and power settings, and 11 field
selectable candela settings for wall and ceiling speaker strobes.
The
low total harmonic distortion of the SP speaker offers high fidelity
sound output while the SPV speaker offers high volume sound output for
use in high ambient noise applications.
- Color: Red
- Voltage: 25 Volts or 70.7 Volts (nominal)
- Candela: Selectable Candela (15, 15/75, 30, 75, 95, 100, 115 cd)
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- Operating Voltage Range with MDL: 9 to 17.5 V (12V nominal) or 17 to 33 V (24 nominal)
- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- Power: 1/4, 1/2, 1, 2 watts
- Wiring Gauge: 12-18 AWG
- Frequency Range: 400 to 4000 Hz
- Humidity Range: 10 to 93% non-condensing
- Wall mount dimensions (including lens): 6.0"L x 5.0"W x 4.7"D (including lens and speaker)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design
- Protective cover isolates speaker components, reduces ground faults
- Electrical compatibility with existing SpectrAlert products
- Field selectable candela settings on wall and ceiling units: Standard: 15, 15/75, 30, 75, 95, 110, 115 High: 135, 150, 177, 185
- Shorting spring on mounting plate tests continuity before installation
- Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4 , 1/2 , 1 and 2 watts)
- Universal mounting plate for wall- and ceiling-mount units
- Compatible with System Sensor synchronization protocol
- SP speakers offer high fidelity sound output
- SPV speakers offer high volume sound output
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- No extension ring required
- Ceiling and wall mount application
- Optional tamper resistant Torx head screw included
|
|
|
|
|
|
|
|
|
