 |
 |
 |
|
The System Sensor SpectrAlert Advance SPSRV is a red speaker strobe for
wall installations with selectable strobe settings of 15, 15/75, 30, 75,
95, 110 and 115 cd, as well as a high dB speaker.
The new
SpectrAlert Advance selectable output speaker strobes and dual
evacuation speakers can reduce ground faults and allow faster
installation.
The SpectrAlert Advance Series of speakers and
speaker strobes is designed to reduce ground faults. The plug-in design
allows the installer to pre-wire mounting plates and dress the wires
before plugging in the speakers. The plastic cover prevents nicked wires
by covering exposed speaker components.
This design also allows
faster installations with instant feedback to ensure that wiring is
properly connected, rotary switches to select voltage and power
settings, and 11 field selectable candela settings for wall and ceiling
speaker strobes.
The low total harmonic distortion of the SP
speaker offers high fidelity sound output while the SPV speaker offers
high volume sound output for use in high ambient noise applications.
- Color: Red
- Voltage: 25 Volts or 70.7 Volts (nominal)
- Candela: Selectable Candela (15, 15/75, 30, 75, 95, 100, 115 cd)
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- Operating Voltage Range with MDL: 9 to 17.5 V (12V nominal) or 17 to 33 V (24 nominal)
- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- Power: 1/4, 1/2, 1, 2 watts
- Wiring Gauge: 12-18 AWG
- Frequency Range: 400 to 4000 Hz
- Humidity Range: 10 to 93% non-condensing
- Wall mount dimensions (including lens): 6.0"L x 5.0"W x 4.9"D (including lens and speaker)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design
- Protective cover isolates speaker components, reduces ground faults
- Electrical compatibility with existing SpectrAlert products
- Field selectable candela settings on wall and ceiling units: Standard: 15, 15/75, 30, 75, 95, 110, 115 High: 135, 150, 177, 185
- Shorting spring on mounting plate tests continuity before installation
- Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4 , 1/2 , 1 and 2 watts)
- Universal mounting plate for wall- and ceiling-mount units
- Compatible with System Sensor synchronization protocol
- SP speakers offer high fidelity sound output
- SPV speakers offer high volume sound output
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- No extension ring required
- Ceiling and wall mount application
- Optional tamper resistant Torx head screw included
|
|
|
|
|
|
|
|
|
