 |
 |
 |
|
The System Sensor SpectrAlert Advance SPSW is a white speaker strobe for
wall installation with selectable strobe settings of 15, 15/75, 30, 75,
95, 110 and 115 cd.
The new SpectrAlert Advance selectable
output speaker strobes and dual evacuation speakers can reduce ground
faults and allow faster installation.
The SpectrAlert Advance
Series of speakers and speaker strobes is designed to reduce ground
faults. The plug-in design allows the installer to pre-wire mounting
plates and dress the wires before plugging in the speakers. The plastic
cover prevents nicked wires by covering exposed speaker components.
This
design also allows faster installations with instant feedback to ensure
that wiring is properly connected, rotary switches to select voltage
and power settings, and 11 field selectable candela settings for wall
and ceiling speaker strobes.
The low total harmonic distortion of
the SP speaker offers high fidelity sound output while the SPV speaker
offers high volume sound output for use in high ambient noise
applications.
- Color: White
- Voltage: 25 Volts or 70.7 Volts (nominal)
- Candela: Selectable Candela (15, 15/75, 30, 75, 95, 100, 115 cd)
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- Operating Voltage Range with MDL: 9 to 17.5 V (12V nominal) or 17 to 33 V (24 nominal)
- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- Power: 1/4, 1/2, 1, 2 watts
- Wiring Gauge: 12-18 AWG
- Frequency Range: 400 to 4000 Hz
- Humidity Range: 10 to 93% non-condensing
- Wall mount dimensions (including lens): 6.0"L x 5.0"W x 4.7"D (including lens and speaker)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design
- Protective cover isolates speaker components, reduces ground faults
- Electrical compatibility with existing SpectrAlert products
- Field selectable candela settings on wall and ceiling units: Standard: 15, 15/75, 30, 75, 95, 110, 115 High: 135, 150, 177, 185
- Shorting spring on mounting plate tests continuity before installation
- Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4 , 1/2 , 1 and 2 watts)
- Universal mounting plate for wall- and ceiling-mount units
- Compatible with System Sensor synchronization protocol
- SP speakers offer high fidelity sound output
- SPV speakers offer high volume sound output
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- No extension ring required
- Ceiling and wall mount application
- Optional tamper resistant Torx head screw included
|
|
|
|
|
|
|
|
|
