 |
 |
 |
|
The System Sensor SpectrAlert Advance SPW is a white speaker for wall installation.
SpectrAlert
Advance outdoor, selectable-output speaker strobes and dual-voltage
evacuation speakers meet virtually any outdoor application requirement.
The
SpectrAlert Advance series offers the broadest line of outdoor speakers
and speaker strobes in the industry. From metal and plastic outdoor
back boxes, to white and red plastic housings, to wall and ceiling
mounting options, SpectrAlert Advance can meet virtually any application
requirement.
SpectrAlert Advance outdoor speakers and speaker
strobes can be used indoors or outdoors in wet or dry applications, and
can provide reliable operation from -40°F to 151°F. In addition, these
speakers provide a broad frequency response range, low harmonic
distortion and maintain a high sound pressure level at all tap settings
to provide accurate and intelligible broadcast of evacuation messages.
The
entire SpectrAlert Advance line, including speakers, provides a plug-in
design that reduces ground faults by enabling installers to pre-wire
mounting plates and dress the wires before plugging in the speakers. To
enable faster installation times, a shorting spring on the mounting
plate provides instant feedback to ensure that wiring is properly
connected. Furthermore, rotary switches simplify the selection of
voltage and power settings. Both wall and ceiling speaker strobes
include field-selectable candela settings that enable installers to
quickly set each device to meet application requirements.
The
speakers’ weatherproof plastic back boxes (shipped with product) and
metal back boxes (available separately) are designed to accommodate
in-and-out wiring for daisy chaining outdoor devices. Plastic back boxes
feature removable side flanges and improved resistance to saltwater
corrosion. The screw-hole knock-outs located on the back of the back box
eliminate the need to drill holes for screw-in mounting. Both
weatherproof back boxes come with 3/4-inch top and bottom conduit entries
and 3/4-inch knock-outs at the back. Included with each back box is a
screw-in NPT plug with an O-ring gasket for a water tight seal.
- Color: White
- Voltage: 25 Volts or 70.7 Volts (nominal)
- Power: 1/4, 1/2, 1, 2 watts
- Wiring Gauge: 12 AWG to 18 AWG
- Frequency Range: 400 to 4000 Hz
- Humidity Range: 10% to 93% non-condensing
- Dimensions: 6.0"L x 5.0"W x 2.8"D
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design
- Protective cover isolates speaker components, reduces ground faults
- Electrical compatibility with existing SpectrAlert products
- Field selectable candela settings on wall and ceiling units: Standard: 15, 15/75, 30, 75, 95, 110, 115 High: 135, 150, 177, 185
- Shorting spring on mounting plate tests continuity before installation
- Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4 , 1/2 , 1 and 2 watts)
- Universal mounting plate for wall- and ceiling-mount units
- Compatible with System Sensor synchronization protocol
- SP speakers offer high fidelity sound output
- SPV speakers offer high volume sound output
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- No extension ring required
- Ceiling and wall mount application
- Optional tamper resistant Torx head screw included
|
|
|
|
|
|
|
|
|
