 |
 |
 |
|
The System Sensor SpectrAlert Advance, Marked with "FUEGO", SR-SP is a
red strobe with selectable strobe settings of 15, 15/75, 30, 75, 95, 110
and 115 cd.
SpectrAlert Advance outdoor, selectable-output
speaker strobes and dual-voltage evacuation speakers meet virtually any
outdoor application requirement.
The SpectrAlert Advance series
offers the broadest line of outdoor speakers and speaker strobes in the
industry. From metal and plastic outdoor back boxes, to white and red
plastic housings, to wall and ceiling mounting options, SpectrAlert
Advance can meet virtually any application requirement.
SpectrAlert
Advance outdoor speakers and speaker strobes can be used indoors or
outdoors in wet or dry applications, and can provide reliable operation
from -40°F to 151°F. In addition, these speakers provide a broad
frequency response range, low harmonic distortion and maintain a high
sound pressure level at all tap settings to provide accurate and
intelligible broadcast of evacuation messages.
The entire
SpectrAlert Advance line, including speakers, provides a plug-in design
that reduces ground faults by enabling installers to pre-wire mounting
plates and dress the wires before plugging in the speakers. To enable
faster installation times, a shorting spring on the mounting plate
provides instant feedback to ensure that wiring is properly connected.
Furthermore, rotary switches simplify the selection of voltage and power
settings. Both wall and ceiling speaker strobes include
field-selectable candela settings that enable installers to quickly set
each device to meet application requirements.
The speakers’
weatherproof plastic back boxes (shipped with product) and metal back
boxes (available separately) are designed to accommodate in-and-out
wiring for daisy chaining outdoor devices. Plastic back boxes feature
removable side flanges and improved resistance to saltwater corrosion.
The screw-hole knock-outs located on the back of the back box eliminate
the need to drill holes for screw-in mounting. Both weatherproof back
boxes come with 3/4-inch top and bottom conduit entries and 3/4-inch
knock-outs at the back. Included with each back box is a screw-in NPT
plug with an O-ring gasket for a water tight seal.
- Color: Red
- Voltage: Regulated 12DC/FWR or regulated 24DC/FWR
- Candela: Selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd
- Operating Voltage Range: 8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)
- Wiring Gauge: 12 to 18 AWG
- Operating Temperature: –40°F to 151°F (–40°C to 66°C)
- Humidity Range: 10 to 93% non-condensing
- Wall mount dimensions (including lens): 5.6"L × 4.7"W × 2.5"D (142 mm L × 119 mm W × 64 mm D)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-in design with minimal intrusion into the back box
- Tamper-resistant construction
- Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
- Field-selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
- Horn rated at 88+ dBA at 16 volts
- Rotary switch for horn tone and three volume selections
- Universal mounting plate for wall and ceiling units
- Mounting plate shorting spring checks wiring continuity before device installation
- Electrically compatible with existing SpectrAlert products
- Compatible with MDL sync module
|
|
|
|
|
|
|
|
|
