You are here: Home > Burglar Alarms / Intrusion >

Sensors for Burglar Alarm Systems

>

Photobeams Sensors for Burglar Alarm Systems

> Takex America
We found 15 results matching your criteria.
Takex America Photobeams
Sort By:
Page of 2
Takex America (Pulnix) BT-150  4'-11" Dual-Sided Photoelectric Beam Tower Takex America (Pulnix) BT-200  6'-6.7" Dual-Sided Photoelectric Beam Tower
The BT Dual Sided Beam Tower is a robust and discreet enclosure, resistant to vandal acts. This special design allows a 360 protection range, giving the beams the possibility to be mounted back to back at any height within the tower.

The BT Series has been designed to allow the use of any TAKEX twin or quad based photoelectric beam. (The BT-WM Wall Mount Series is also available as a single sided tower that mounts directly to a flat surface).

The BT Series Dual Sided towers provide single or multiple beam options withexternal ranges of up to 200 meters (660ft). The photoelectric beams can be fixed at any height thanks to the adjustable fixings included in each tower. To enhance mounting options and obtain 360 protection, beams can be mounted back to back at any height.

The 100, 150, 200 and 300cm (3' 3.4; 4' 11; 6' 6.7 and 9' 10) can be adjusted to most situations required by our customers. However, in particular situations, special sizes can be manufactured. The towers can either be mounted directly onto the floor or using the optional floor bracket (BT-FB) designed to be set into concrete, or for wall mounting there is the optional wall-mounted bracket BT-WB.

Each column is delivered with detailed documentation and instructions, making installation easy and less time consuming. The tops are supplied with a tamper switch as standard. There is an optional pressure sensing (anti climb) top available (BT-PS). In order to obtain optimal performance in external environments with low temperature conditions and condensation risk, the tower should be fitted with at least one heater.

A mounting kit including expandable bolts is included with every BT tower: Stainless screws, nylock nuts, sealing strips, expanding bolts, etc.

The BT Dual Sided Beam Tower is a robust and discreet enclosure, resistant to vandal acts. This special design allows a 360 protection range, giving the beams the possibility to be mounted back to back at any height within the tower.

The BT Series has been designed to allow the use of any TAKEX twin or quad based photoelectric beam. (The BT-WM Wall Mount Series is also available as a single sided tower that mounts directly to a flat surface).

The BT Series Dual Sided towers provide single or multiple beam options withexternal ranges of up to 200 meters (660ft). The photoelectric beams can be fixed at any height thanks to the adjustable fixings included in each tower. To enhance mounting options and obtain 360 protection, beams can be mounted back to back at any height.

The 100, 150, 200 and 300cm (3' 3.4; 4' 11; 6' 6.7 and 9' 10) can be adjusted to most situations required by our customers. However, in particular situations, special sizes can be manufactured. The towers can either be mounted directly onto the floor or using the optional floor bracket (BT-FB) designed to be set into concrete, or for wall mounting there is the optional wall-mounted bracket BT-WB.

Each column is delivered with detailed documentation and instructions, making installation easy and less time consuming. The tops are supplied with a tamper switch as standard. There is an optional pressure sensing (anti climb) top available (BT-PS). In order to obtain optimal performance in external environments with low temperature conditions and condensation risk, the tower should be fitted with at least one heater.

A mounting kit including expandable bolts is included with every BT tower: Stainless screws, nylock nuts, sealing strips, expanding bolts, etc.

Takex America (Pulnix) BT-300  9'-10" Dual-Sided Photoelectric Beam Tower Takex America (Pulnix) MW50  Photo Beam Microwave Sensor W/ Transmitter and Receiver
The BT Dual Sided Beam Tower is a robust and discreet enclosure, resistant to vandal acts. This special design allows a 360 protection range, giving the beams the possibility to be mounted back to back at any height within the tower.

The BT Series has been designed to allow the use of any TAKEX twin or quad based photoelectric beam. (The BT-WM Wall Mount Series is also available as a single sided tower that mounts directly to a flat surface).

The BT Series Dual Sided towers provide single or multiple beam options withexternal ranges of up to 200 meters (660ft). The photoelectric beams can be fixed at any height thanks to the adjustable fixings included in each tower. To enhance mounting options and obtain 360 protection, beams can be mounted back to back at any height.

The 100, 150, 200 and 300cm (3' 3.4; 4' 11; 6' 6.7 and 9' 10) can be adjusted to most situations required by our customers. However, in particular situations, special sizes can be manufactured. The towers can either be mounted directly onto the floor or using the optional floor bracket (BT-FB) designed to be set into concrete, or for wall mounting there is the optional wall-mounted bracket BT-WB.

Each column is delivered with detailed documentation and instructions, making installation easy and less time consuming. The tops are supplied with a tamper switch as standard. There is an optional pressure sensing (anti climb) top available (BT-PS). In order to obtain optimal performance in external environments with low temperature conditions and condensation risk, the tower should be fitted with at least one heater.

A mounting kit including expandable bolts is included with every BT tower: Stainless screws, nylock nuts, sealing strips, expanding bolts, etc.

Takex America (Pulnix) MW50  Photo Beam Microwave Sensor W/ Transmitter and Receiver
Takex America (Pulnix) NA-M7R AC/DC Unit Power Photoelectric Sensor, Terminal-Type Takex America (Pulnix) PB-4RNSE  Single Beam Reflective Photoelectric Sensor
AC/DC Power Photo Sensors were developed to make use of the available power and are the majority of models are self-switching between AC and DC and self-regulating from 24 VDC to 240 VAC. These units provide relayed or Triac outputs and many can be used as direct inputs to control mechanisms.

Advanced circuitry allows for detection distances for up to 30 meters without the use of laser components. AC power allows for a wide range of applications such as car washes, exposed vehicle detection systems, conveyor detection in unusual environments such as frozen fish.

�� Fully open terminal block for ease of wiring �� Compatible with a broad range of power supply voltages, allowing global use
Miniature photoelectric beam sensor is suitable for use inconspicuously in a wide range of applications.

  • Detection System Single Active Infrared Beam (Reflective)
  • Wavelength 940nm
  • Modulation Modulation: 500Hz
  • Protection Distance Outdoors 4m (13ft.)
  • Protection Distance Indoors 4m (13ft.)
  • Response Time 100msec.
  • Frequency Selection Not Applicable
  • Alarm Output Dry Relay Contact
  • N/O, N/C Switch Selectable
  • Flush Mount
  • Reset: Approx. 1.5 secs.
  • Contact Rating 30VAC/DC 0.3A Max
  • Takex America (Pulnix) PB-4RTNS  13' Twin Miniature Reflector Photoelectric Beam Takex America (Pulnix) PB-60TKW 200'/400' Double Modulated Photo Beam Relay, White
    Miniature photoelectric beam sensor is suitable for use inconspicuously in a wide range of applications.

  • Detection System Twin Active Infrared Beam (Reflective)
  • Wavelength 940nm
  • Modulation Modulation: 500Hz
  • Protection Distance Outdoors 4m (13ft.)
  • Protection Distance Indoors 4m (13ft.)
  • Response Time 100msec.
  • Frequency Selection Not Applicable
  • Alarm Output Dry Relay Contact
  • N/O, N/C Switch Selectable
  • Flush Mount
  • Reset: Approx. 1.5 secs.
  • Contact Rating 30VAC/DC 0.3A Max
  • Takex America (Pulnix) PB-60TKW 200'/400' Double Modulated Photo Beam Relay, White
    Takex America (Pulnix) PB-IN100HF 330' Intelligent 4-Channel Quad Photoelectric Beam Takex America (Pulnix) PB-IN200HF 660' Intelligent 4-Channel Quad Photoelectric Beam
    The Takex Intelligent QUAD Photoelectric BEam is specially designed for outdoor protection. Unique QUAD beams are synchronized to work together to reinforce the beam range and stability in severe weather conditions.

    Main Features
  • 4 beams are "and-gated" to prevent false alarms from falling leaves and small animals.
  • The active infrared transmission is exceptionally strong with a maximum arrival distance 10X greater than the specified protection distance.
  • External light compensation circuit provides excellent tolerance against sun light, auto head lights, fluorescent light or mercury light.
  • Four frequency selections help avoid cross-talk in stacked or long linear installations.
  • 2 levels of beam transmission strength can be set to the appropriate protection distance.
  • Easy beam alignment utilizing an alignment tone for quick set-up. Tone maximizes at peak beam level.
  • Sensetivity attenuation LED lights up when beam level is attenuated indicating low sensetivity.
  • Auto-gain lock sets optimal sensetivity at any coverage distance up to maximum protection distance.
  • Sensetivity is automatically increased in bad weather to compensate for fog, heavy rain, frost or snow.
  • Special hood protects against frost and dew.
  • An environmental trouble signal is sent when beam reception level is reduced below acceptable level.
  • Polycarbonate cover protects against shock.
  • Wide adjustment (+/- 90 deg. hor. +/- 10 deg. vert.)

    Specifications
  • Detection System Quad, Active Infrared Beam
  • Wavelength: 940nm
  • Modulation: Double Pulse Modulation
  • Protection Distance: Outdoors 100m (330ft.)
  • Protection Distance: Indoors 200m (660ft.)
  • Signal Arrival Distance 1000m(3300ft.)
  • Response Time 50-700msec.Adjustable
  • Frequency Selection 4 Channels
  • Alarm Output Dry Relay Contact
  • N/O, N/C Switch Selectable
  • Reset: Approx. 1.5 secs.
  • Contact Rating 30VAC/DC 1.0A Max
  • Environmental Output Dry Relay Contact
  • Form B, N/C
  • Contact Rating2 30VDC 0.1A
  • Alarm Led Red On at Alarm
  • Sensitivity Attenuation Led Red On when beam reception is attenuated
  • Alarm Memory Led Red Pulsing at Alarm
  • Manual Reset: By Auxilliary Switch
  • Auto Reset:55 to 60mins.
  • Lens Adjustment Vertical: 10
  • Horizontal: 90
  • Supply Power 10 to 30VDC ( non polarity)
  • Current Consumption 70mA typical (105mA Max.at alignment)
  • Ambient Temperature -31F to + 151F (-35C to + 66C)
  • Installation Wall or Post mounting
  • Wiring Terminals
  • Accessories Refer Accessory Listing
  • Weight Transmitter: 1200g (42oz)
  • Receiver:1300g (45.5oz)
  • External Appearance Body: PC Resin (wine red)
  • The Takex Intelligent QUAD Photoelectric Beam is specially designed for outdoor protection. Unique QUAD beams are synchronized to work together to reinforce the beam range and stability in severe weather conditions.

    Main Features
  • 4 beams are "and-gated" to prevent false alarms from falling leaves and small animals.
  • The active infrared transmission is exceptionally strong with a maximum arrival distance 10X greater than the specified protection distance.
  • External light compensation circuit provides excellent tolerance against sun light, auto head lights, fluorescent light or mercury light.
  • Four frequency selections help avoid cross-talk in stacked or long linear installations.
  • 2 levels of beam transmission strength can be set to the appropriate protection distance.
  • Easy beam alignment utilizing an alignment tone for quick set-up. Tone maximizes at peak beam level.
  • Sensetivity attenuation LED lights up when beam level is attenuated indicating low sensetivity.
  • Auto-gain lock sets optimal sensetivity at any coverage distance up to maximum protection distance.
  • Sensetivity is automatically increased in bad weather to compensate for fog, heavy rain, frost or snow.
  • Special hood protects against frost and dew.
  • An environmental trouble signal is sent when beam reception level is reduced below acceptable level.
  • Polycarbonate cover protects against shock.
  • Wide adjustment (+/- 90 deg. hor. +/- 10 deg. vert.)

    Specifications
  • Detection System Quad, Active Infrared Beam
  • Wavelength: 940nm
  • Modulation: Double Pulse Modulation
  • Protection Distance: Outdoors 200m (660ft.)
  • Protection Distance: Indoors 400m (1320ft.)
  • Signal Arrival Distance 2000m(6600ft.)
  • Response Time 50-700msec.Adjustable
  • Frequency Selection 4 Channels
  • Alarm Output Dry Relay Contact
  • N/O, N/C Switch Selectable
  • Reset: Approx. 1.5 secs.
  • Contact Rating 30VAC/DC 1.0A Max
  • Environmental Output Dry Relay Contact
  • Form B, N/C
  • Contact Rating2 30VDC 0.1A
  • Alarm Led Red On at Alarm
  • Sensitivity Attenuation Led Red On when beam reception is attenuated
  • Alarm Memory Led Red Pulsing at Alarm
  • Manual Reset: By Auxilliary Switch
  • Auto Reset:55 to 60mins.
  • Lens Adjustment Vertical: 10
  • Horizontal: 90
  • Supply Power 10 to 30VDC ( non polarity)
  • Current Consumption 70mA typical (105mA Max.at alignment)
  • Ambient Temperature -31F to + 151F (-35C to + 66C)
  • Installation Wall or Post mounting
  • Wiring Terminals
  • Accessories Refer Accessory Listing
  • Weight Transmitter: 1200g (42oz)
  • Receiver:1300g (45.5oz)
  • External Appearance Body: PC Resin (wine red)
  • Takex America (Pulnix) PB-IN50HF 165' Intelligent 4-Channel Quad Photoelectric Beam Takex America (Pulnix) PR-10B 33' Indoor Reflective Photoelectric Beam, NC, 10.5-15 VDC
    The Takex Intelligent QUAD Photoelectric Beam is specially designed for outdoor protection. Unique QUAD beams are synchronized to work together to reinforce the beam range and stability in severe weather conditions.

    Main Features
  • 4 beams are "and-gated" to prevent false alarms from falling leaves and small animals.
  • The active infrared transmission is exceptionally strong with a maximum arrival distance 10X greater than the specified protection distance.
  • External light compensation circuit provides excellent tolerance against sun light, auto head lights, fluorescent light or mercury light.
  • Four frequency selections help avoid cross-talk in stacked or long linear installations.
  • 2 levels of beam transmission strength can be set to the appropriate protection distance.
  • Easy beam alignment utilizing an alignment tone for quick set-up. Tone maximizes at peak beam level.
  • Sensetivity attenuation LED lights up when beam level is attenuated indicating low sensetivity.
  • Auto-gain lock sets optimal sensetivity at any coverage distance up to maximum protection distance.
  • Sensetivity is automatically increased in bad weather to copmensate for fog, heavy rain, frost or snow.
  • Special hood protects against frost and dew.
  • An environmental trouble signal is sent when beam reception level is reduced below acceptable level.
  • Polycarbonate cover protects against shock.
  • Wide adjustment (+/- 90 deg. hor. +/- 10 deg. vert.)

    Specifications
  • Detection System Quad, Active Infrared Beam
  • Wavelength: 940nm
  • Modulation: Double Pulse Modulation
  • Protection Distance: Outdoors 50m (165ft.)
  • Protection Distance: Indoors 100m (330ft.)
  • Signal Arrival Distance 500m(1650ft.)
  • Response Time 50-700msec.Adjustable
  • Frequency Selection 4 Channels
  • Alarm Output Dry Relay Contact
  • N/O, N/C Switch Selectable
  • Reset: Approx. 1.5 secs.
  • Contact Rating 30VAC/DC 1.0A Max
  • Environmental Output Dry Relay Contact
  • Form B, N/C
  • Contact Rating2 30VDC 0.1A
  • Alarm Led Red On at Alarm
  • Sensitivity Attenuation Led Red On when beam reception is attenuated
  • Alarm Memory Led Red Pulsing at Alarm
  • Manual Reset: By Auxilliary Switch
  • Auto Reset:55 to 60mins.
  • Lens Adjustment Vertical: 10
  • Horizontal: 90
  • Supply Power 10 to 30VDC ( non polarity)
  • Current Consumption 70mA typical (105mA Max.at alignment)
  • Ambient Temperature -31F to + 151F (-35C to + 66C)
  • Installation Wall or Post mounting
  • Wiring Terminals
  • Accessories Refer Accessory Listing
  • Weight Transmitter: 1200g (42oz)
  • Receiver:1300g (45.5oz)
  • External Appearance Body: PC Resin (wine red)
  • The popular PR-I0B reflector beam is now available in a white enclosure for a more unobtrusive installation. It is designed for applications is desirable but running wire to both ends is impractical. Suggested applications include entrances and exits, corridors, specific area and as an annunciation device.

    ROTARY OPTICAL SYSTEM
    Beam direction can be rotated a full 180 for installation adaptation.

    EASY MAINTENANCE
    Operation LED (red) and SA (Self- Adjustment) mechanism yield quick operation check and ensure good beam alignment. [Utility model registeredJ

    HIGH SENSITIVITY TO REFLECTED BEAM
    Receiver incorporates a differential calculus detection system which precisely "locks on" to the incoming reflected beam. [Utility model registeredJ

    EASY INSTALLATION
    Wire is run to the transmitter only. The reflector allows up to a 40 (I 20} angle varience in beam reception/ reflection which makes installation very "forgiving" and can aid in situations where it is nearly impossible for the beam to reflect off the PR-10B mirror "dead center:'. Utility model 4, Design 1-Registered

    FLUSH MOUNT TYPE AVAILABLE
    (PR-10BU) Inconspicuous flush mount PR-10BU is available. Note: Use of the flush mount type unit eliminates the ability to rotate the optics.

    Specifications
  • Detection System Reflective, Active Infrared Beam
  • Wavelength 940nm
  • Modulation Modulation 500Hz
  • Protection Distance Indoors 10m (33ft.)
  • Response Time 50-100msec. Adjustable
  • Alarm Output Dry Relay Contact
  • Form B - N/C
  • Reset: Approx. 1sec.
  • Contact Rating 30VAC/DC 0.5A Max
  •    
     
    Takex America Photobeams
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please