Home > Shop Brands > TAKEX > Security > Photoelectric Beams >


Takex America (Pulnix) PB-100ST 330' Outdoor / 660' Indoor Double Modulated Dual Beam, N/O or N/C Relay, 10 to 30 VDC

Takex America (Pulnix) PB-100ST 330' Outdoor / 660' Indoor Double Modulated Dual Beam, N/O or N/C Relay, 10 to 30 VDC


Our Price : $307.47

UPC Code: 100000901021

Product Code: 505526


The PULNiX "SYNCHRO TWIN" Photoelectric Beam is designed to meet the highest standards of quality and reliability for photoelectric beam intrusion detection. Unique twin beams are synchronized to work together to reinforce the range and stability in severe weather conditions. The systems has a rotary optical system for easy installation and the spacial optical mirror design aids in proper alignment.

Synchronized twin beams reduce false alarms caused by flying birds and falling leaves.

Trouble-free condition in 50,000 Ix illumination fluctuation is assured by external light compensation circuit a filter, specially designed, that cuts visible rays effectively. Excellent tolerance against sun light, automobile head light, fluorescent light or mercury light.

The special view finder allows for fast aiming and assures good alignment. Equipped with monitor jack to check sensitivity. Also there is a sensitivity attenuation LED and monitor jack output.

ROTARY OPTICAL SYSTEM The optical system of both the transmitter and receiver can be rotated a full 180 which allows for side aiming. Therefore the units do not have to be mounted face to face and the beam direction cannot be discerned by simple observation.

An unique rubber grommet prevents insects from entering through the wiring hole.

As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

* Wide adjustment (horizontally +/-90, vertically +/-10)
* Tamper output for high security. (Receiver)
* Polycarbonate cover excellent as anti-shock
* Automatic Gain Application

  • Detection System Twin, Active Infrared Beam
  • Wavelength 940nm
  • Modulation Double Pulse Modulation
  • Protection Distance Outdoors 100m (330ft.)
  • Protection Distance Indoors 200m (660ft.)
  • Signal Arrival Distance 1000m(3300ft.)
  • Response Time 50-700msec.Adjustable
  • Frequency Selection Not Applicable
  • Alarm Output Dry Relay Contact
  • Form C, N/O-C- N/C
  • Reset: Approx. 1.5 secs.
  • Contact Rating 30VAC/DC 0.5A Max.
  • Environmental Output Not Applicable
  • Tamper Output Micro-switch Dry Contact
  • Form B, N/C
  • Contact Rating2 30VDC 0.1A
  • Alarm Led Red On at Alarm
  • Sensitivity Attenuation Led Red On when beam reception is attenuated
  • Alarm Memory Led Red Not Applicable
  • Lens Adjustment Vertical: 10 / Horizontal: 90
  • Supply Power 10 to 30VDC ( non polarity)
  • Current Consumption 80mA Max.
  • Ambient Temperature -31F to + 151F (-35C to + 66C)
  • Installation: Wall or Post mounting
  • Wiring: Terminals
  • Weight Transmitter: 1200g (42oz)
  • Receiver: 1200g (42oz)
  • External Appearance Body: PC Resin (wine red)

  • Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Shop Brands > TAKEX > Security > Photoelectric Beams
    Shop Brands > TAKEX > Security

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please