You are here: Home > CCTV / Surveillance > CCTV Accessories > Transmitters & Receivers
We found 51 results matching your criteria.

Transmitters & Receivers for CCTV Surveillance Security Systems


Transmitters and receivers often rely on UTP (unshielded twisted pair) wiring, which has become ubiquitous. Security Store USA supplies a full line of UTP-capable transmitters and receivers, as well as video/data/power integration hubs that send both signals and power over the same wiring. Security Store USA's transceivers can individually handle up to eight channels.
Sort By:
Page of 5
Altronix Active UTP Transceiver Hub Altronix HubSat4 Passive UTP Transceiver Hub with Integral Camera Power
Overview
Altronix HubWayLDH8 Active UTP Transceiver Hub transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are compatible with fixed or PTZ cameras. An optional HubSat4/4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWayLDH8. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features/Specifications
• Input 115VAC 50/60Hz, 2 amp or 230VAC 50/60Hz, 1.25 amp.
• Data:
- RS422/RS485 data inputs.
• Video:
- Eight (8) channels of video over twisted pair up to 3000 ft.
- Eight (8) 75 ohm video outputs.
• AC input power indicator.
• Eight (8) individual power LED indicators.
• Picture and Gain control.
• Illuminated master power disconnect circuit breaker with manual reset.
• IEC320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mount.
• 1U rack mount chassis for use in standard EIA 19” rack.
• Optional HubSat4S allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable.
• Lifetime Warranty.
Rack Chassis
• Modular 1U standard EIA 19” rack mount chassis.
• Dimensions: 1.625”H x 19.125”W x 8.5”D.
Overview
Altronix HubSat4 Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. Optionally, the HubSat4/4D can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Specifications:
• Individual selectable 24VAC or 28VAC power outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to exceed a total of 4 amp maximum current.
• Four (4) fuse protected outputs.
• Main fuse (internal) is rated at 3.5 amp/250V.
• Input 115VAC 50/60Hz, .9 amp.
• Data:
- RS422/RS485 data input.
• Video:
- Four (4) channels of quality video over twisted pair up to a distance of 750 ft. per channel.
- Four (4) 75 ohm video outputs.
• Automotive blade fuse protected outputs.
• Blade fuses are rated @ 3 amp per channel.
• Four (4) individual power LED indicators.
• AC (HubWayAv) and/or DC (HubWayDv) Video Balun/Combiners required.
• Lifetime Warranty.
Altronix HubSat42S Passive UTP Transceiver Hub with Integral Camera Power Altronix HubSat4D Passive UTP Transceiver Hub with Integral Camera Power
Power supply, 4channel, passive UTP hub, Video transmissionrange up to 750' with PRT 8AC balun combiners. Overview:
Altronix HubSat4D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. Optionally, the HubSat4/4D can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Specifications
• Individual selectable 24VAC or 28VAC power outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to exceed a total of 4 amp maximum current.
• Four (4) PTC proteceted outputs.
• Main fuse (internal) is rated at 3.5 amp/250V.
• Input 115VAC 50/60Hz, .9 amp.
• Data:
- RS422/RS485 data input.
• Video:
- Four (4) channels of quality video over twisted pair up to a distance of 750 ft. per channel.
- Four (4) 75 ohm video outputs.
• PTC protected outputs.
• PTC’s are rated @ 1 amp per channel.
• Four (4) individual power LED indicators.
• AC (HubWayAv) and/or DC (HubWayDv) Video Balun/Combiners required.
• Lifetime Warranty.
Enclosure:
• Dimensions: 8.5”H x 7.5”W x 3.5”D.
• 1/2" and 3/4" combination knockouts.
Altronix HubWay162D Passive UTP Transceiver Hub w/Integral Camera Power Altronix HubWay2 - Video / Data / Power Integration over Cat5 (UTP) 8 Channels
Overview
Altronix HubWay162D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 16 camera channels in a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4/4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay16D. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features/Specifications: • Individual selectable 24VAC or 28VAC power outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to exceed a total of 10 amp (300VA) maximum current.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
• Primary fuse (internal) is rated at 5 amp/250V.
• Input 115VAC 50/60Hz, 4 amp or 230VAC 50/60Hz, 2.5 amp.
• Data:
- RS422/RS485 data input.
• Video:
- Sixteen (16) channels of video over twisted pair up to 750 ft.
- Sixteen (16) 75 ohm video outputs.
• AC input power indicator.
• Sixteen (16) individual power LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset.
• IEC320 - 3-wire grounded line cord (detachable).
• Rack, wall or shelf mount.
• Optional HubSat4/4D allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable.
• Includes sixteen (16) AC (HubWayAv) Video Balun/Combiners.
• Lifetime Warranty.

Rack Chassis- • Modular 1U standard EIA 19” rack mount chassis.
• Dimensions: 1.625”H x 19.125”W x 8.5”D.
HUBWAY2 Video/Data/Power over Cat5 (UTP)- Eight (8) selectable fuse protected outputs. 24VAC or 28VAC @ 8 amp total current, 115VAC input. (Configurable for: AC and/or DC cameras when used with HUBWAYA or HUBWAYD matching AC or DC Video Balun/Combiners, purchased separately). 2U rack mount chassis for use in standard EIA 19" rack 3.25"H x 19.125"W x 8.5"D.

HubWay 2 Video / Data / Power Integration Overview
This unit provides centralized UTP video, RS422/RS-S485 data and distributed camera power over a single CAT-5 (or higher) cable to simplify CCTV installations for distances up to 1000 feet. It features eight (8) built-in individually selectable 24/28VAC power outputs. It is universally configurable for both AC and/or DC cameras when used in conjunction with HubWay Series matching AC (HubWayA) or DC (HubWayD) video balun combiners.

Features/Specifications
• 24VAC or 28VAC individually selectable output.
• 8 amp total output current.
• Eight (8) channel combined power, data and video (up to 1000 ft.).
• 1 amp max per channel.
• Eight (8) fuse protected outputs.
• Input 115VAC 50/60Hz, 3.5 amp.
• Data: - Eight (8) data/PTZ inputs.
• Video: - Eight (8) 75 ohm video inputs.
• In-line fuse rated at 5A/250V.
• Eight (8) individual power LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset.
• Removable terminal blocks w/locking screw flanges.
• 3-wire grounded line cord.
• Spare fuses provided.
• AC (HubWayA) and/or DC (HubWayD) combiners required.
• Lifetime Warranty.

Enclosure
• Modular 2U standard EIA 19” rack mount chassis.
• Dimensions: 3.25”H x 19.125”W x 8.5”D

Altronix HubWay22I - Video / Data / Power Integration over Cat5 (UTP) with eight (8) AC Video Balun Combiners Eight (8) Isolated outputs Altronix HubWay23I - Video / Data / Power Integration over Cat5 (UTP) with eight (8) DC Video Balun Combiners Eight (8) isolated outputs
HUBWAY22I Video/Data/Power over Cat5 (UTP)- Eight (8) electronically isolated fuse protected outputs. 24VAC @ 8 amp total current, 115VAC input. (includes eight (8) 24VAC/28VAC Video Balun/Combiners). 2U rack mount chassis for use in standard EIA 19" rack 3.25"H x 19.125"W x 8.5"D.

HubWay 22i Video / Data / Power Integration Overview
This unit provides centralized UTP video, RS422/RS-S485 data and distributed camera power over a single CAT-5 (or higher) cable to simplify CCTV installations for distances up to 1000 feet. It features eight (8) built-in individually selectable 24/28VAC power outputs. It is universally configurable for both AC and/or DC cameras when used in conjunction with HubWay Series matching AC (HubWayA) or DC (HubWayD) video balun combiners.

Features/Specifications
• 24VAC or 28VAC individually selectable output.
• 8 amp total output current.
• Eight (8) channel combined power, data and video (up to 1000 ft.).
• 1 amp max per channel.
• Eight (8) isolated fuse protected outputs.
• Input 115VAC 50/60Hz, 3.5 amp.
• Data: - Eight (8) data/PTZ inputs.
• Video: - Eight (8) 75 ohm video inputs.
• In-line fuse rated at 5A/250V.
• Eight (8) individual power LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset.
• Removable terminal blocks w/locking screw flanges.
• 3-wire grounded line cord.
• Spare fuses provided.
• Includes eight (8) AC (HubWayA) combiners.
• Lifetime Warranty.

Enclosure
• Modular 2U standard EIA 19” rack mount chassis.
• Dimensions: 3.25”H x 19.125”W x 8.5”D

HUBWAY23I Video/Data/Power over Cat5 (UTP)- Eight (8) electronically isolated fuse protected outputs.12VDC @ 8 amp total current, 115VAC input. (includes eight (8) 12VDC Video Balun/Combiners). 2U rack mount chassis for use in standard EIA 19" rack 3.25"H x 19.125"W x 8.5"D.

HubWay 23i Video / Data / Power Integration Overview
This unit provides centralized UTP video, RS422/RS-S485 data and distributed camera power over a single CAT-5 (or higher) cable to simplify CCTV installations for distances up to 1000 feet. It features eight (8) built-in individually selectable 24/28VAC power outputs. It is universally configurable for both AC and/or DC cameras when used in conjunction with HubWay Series matching AC (HubWayA) or DC (HubWayD) video balun combiners.

Features/Specifications
• 24VAC or 28VAC individually selectable output.
• 8 amp total output current.
• Eight (8) channel combined power, data and video (up to 1000 ft.).
• 1 amp max per channel.
• Eight (8) isolated fuse protected outputs.
• Input 115VAC 50/60Hz, 3.5 amp.
• Data: - Eight (8) data/PTZ inputs.
• Video: - Eight (8) 75 ohm video inputs.
• In-line fuse rated at 5A/250V.
• Eight (8) individual power LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset.
• Removable terminal blocks w/locking screw flanges.
• 3-wire grounded line cord.
• Spare fuses provided.
• Includes eight (8) DC (HubWayD) combiners.
• Lifetime Warranty.

Enclosure
• Modular 2U standard EIA 19” rack mount chassis.
• Dimensions: 3.25”H x 19.125”W x 8.5”D

Altronix HubWay8 Passive UTP Transceiver Hub with Integral Camera Power Altronix HubWay82 Passive UTP Transceiver Hub with Integral Camera Power w/8 HubWayAv Video Balun/Combiners
Overview
Altronix HubWay8 Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8camera channels in a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4/4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay8. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features/Specifications:
• Individual selectable 24VAC or 28VAC power outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to exceed a total of 5 amp (150VA) maximum current.
• Blade fuses are rated @ 3 amp per channel.
• Surge suppression.
• Primary fuse (internal) is rated at 5 amp/250V.
• Input 115VAC 50/60Hz, 2 amp or 230VAC 50/60Hz, 1.25 amp.
• Data:
- RS422/RS485 data input.
• Video:
- Eight (8) channels of video over twisted pair up to 750 ft.
- Eight (8) 75 ohm video outputs.
• AC input power indicator.
• Eight (8) individual power LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset.
• IEC320 - 3-wire grounded line cord (detachable).
• Rack, wall or shelf mount.
• Optional HubSat4/4D allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable.
• AC (HubWayAv) and/or DC (HubWayDv) Video Balun/Combiners required.
• Lifetime Warranty.
Rack Chassis:
• Modular 1U standard EIA 19” rack mount chassis.
• Dimensions: 1.625”H x 19.125”W x 8.5”D.
Overview:
Altronix HubWay82 Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8camera channels in a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4/4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay82. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features/Specifications
• Individual selectable 24VAC or 28VAC power outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to exceed a total of 5 amp (150VA) maximum current.
• Blade fuses are rated @ 3 amp per channel.
• Surge suppression.
• Primary fuse (internal) is rated at 5 amp/250V.
• Input 115VAC 50/60Hz, 2 amp or 230VAC 50/60Hz, 1.25 amp.
• Data:
- RS422/RS485 data input.
• Video:
- Eight (8) channels of video over twisted pair up to 750 ft.
- Eight (8) 75 ohm video outputs.
• AC input power indicator.
• Eight (8) individual power LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset.
• IEC320 - 3-wire grounded line cord (detachable).
• Rack, wall or shelf mount.
• Optional HubSat4/4D allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable.
• Includes eight (8) AC (HubWayAv) Video Balun/Combiners.
• Lifetime Warranty.
Rack Chassis:
• Modular 1U standard EIA 19” rack mount chassis.
• Dimensions: 1.625”H x 19.125”W x 8.5”D.
Altronix HubWay82D Passive UTP Transceiver Hub with Integral Camera Power w/8 HubWayAv Video Balun/Combiners Altronix HubWay82DS Passive UTP Transceiver Hub with Integral Camera Power w/8 HubWayAv Video Balun/Combiners
Overview
Altronix HubWay82D Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8camera channels in a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4/4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay82D. In addition, the HubSat4/4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features/Specifications
• Individual selectable 24VAC or 28VAC power outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to exceed a total of 5 amp (150VA) maximum current.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
• Primary fuse (internal) is rated at 5 amp/250V.
• Input 115VAC 50/60Hz, 2 amp or 230VAC 50/60Hz, 1.25 amp.
• Data:
- RS422/RS485 data input.
• Video:
- Eight (8) channels of video over twisted pair up to 750 ft.
- Eight (8) 75 ohm video outputs.
• AC input power indicator.
• Eight (8) individual power LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset.
• IEC320 - 3-wire grounded line cord (detachable).
• Rack, wall or shelf mount.
• Optional HubSat4/4D allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable.
• Includes eight (8) AC (HubWayAv) Video Balun/Combiners.
• Lifetime Warranty.

Rack Chassis:
• Modular 1U standard EIA 19” rack mount chassis.
• Dimensions: 1.625”H x 19.125”W x 8.5”D.
Overview
Altronix new HubWay82DS Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8camera channels in a space saving 1U EIA 19" rack mount chassis which may be wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv Video Balun/Combiners. An optional HubSat4 Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5or higher structured cable back to the HubWay82DS. In addition, the HubSat4 provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features/Specifications:
• Individual selectable 24VAC or 28VAC power outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to exceed a total of 5 amp (150VA) maximum current.
• PTC’s are rated @ 1 amp per channel.
• Surge suppression.
• Main fuse (internal) is rated at 5 amp/250V.
• Input 115VAC 50/60Hz, 2 amp or 230VAC 50/60Hz, 1.25 amp.
• Data:
- Two (2) data/PTZ inputs.
• Video:
- Eight (8) channels of video over twisted pair up to 750 ft.
- Eight (8) 75 ohm video outputs.
• AC input power indicator.
• Eight (8) individual power LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset.
• IEC320 - 3-wire grounded line cord (detachable).
• Rack, wall or shelf mount.
• Optional HubSat4 allows transmission of up to four (4) video signals over a single CAT-5 (or higher) structured cable.
• Includes eight (8) AC (HubWayAv) Video Balun/Combiners.
• Lifetime Warranty.

Rack Chassis:
• Modular 1U standard EIA 19” rack mount chassis.
• Dimensions: 1.625”H x 19.125”W x 8.5”D.
   
 
Transmitters & Receivers for CCTV Surveillance Security Systems
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please