You are here: Home > Burglar Alarms / Intrusion >

Horns, Strobes, Sirens for Burglar Alarm Systems

> Horns Strobes & Sirens > United Security Product
We found 11 results matching your criteria.
United Security Product
Sort By:
Page of 1
Gentex Corp 9041327 Emergency Notification Evacuation Horn/Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, Red Faceplate, Amber Lens Gentex Corp 9041329 Emergency Notification Evacuation Horn/Strobe, Selectable Candela, Low Profile, 24VDC, Wall-Mount, No Lettering, Red Faceplate, Blue Lens
The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5” high x 4.5” wide x 2.5” deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • The Commander3 Series Emergency Notification Evacuation Signals is a wall mount, low profile strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation, emergency response and many more.

    The GE3 Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Commander3 Emergency Notification Evacuation Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander3 Emergency Notification Series is shipped with a die cast 4" mounting bracket which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw and match it against the blue print. The Commander3 Emergency Notification Evacuation Series are UL1638 and UL464, listed and are warranted for three years from date of purchase.

    Features
  • Nominal Voltage - 24 VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 60, 75, and 110
  • Unit Dimensions: 5” high x 4.5” wide x 2.5” deep
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Synchronize Strobe and Horn by Using the Gentex Synchronization Module
  • Prewire Entire System, Then Install Your Signals
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch for Chime, Whoop, Mechanical and 2400Hz Tone
  • Switch for Continuous or Temporal 3 (not available on whoop tone)
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GSB (Gentex Surface Mount Box)
  • Silence Horn While Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate Available in Red or Off-White
  • Gentex Corp 9041375 Emergency Notification Evacuation Horn/Strobe, Selectable Candela Low Profile, No Lettering, Ceiling-Mount, Red Faceplate, Amber Lens Gentex Corp 9041376 Emergency Notification Evacuation Horn/Strobe, Selectable Candela Low Profile, No Lettering, Ceiling-Mount, White Faceplate, Amber Lens
    The Commander4 Series Emergency Notification Evacuation Signals is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Application include sever weather, evacuation, emergency response and many more.

    The GC Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 75, 95 and 115 candela. The Commander4 Emergency Notification Evacuation Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander4 Emergency Notification Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage without removing the signal. The Commander4 Emergency Notification Evacuation Series appliances are UL 1638 and UL464 listed and is warranted for three years from the date of purchase.

    Features
  • Nominal Voltage - 24VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 75, 95 and 115 candela
  • Unit Dimensions: 6” x 2.6”
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Synchronize Strobe and Horn Using the Gentex SynchronizationModule
  • Silence Horn while Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate available in red or off-white
  • The Commander4 Series Emergency Notification Evacuation Signals is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Application include sever weather, evacuation, emergency response and many more.

    The GC Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 75, 95 and 115 candela. The Commander4 Emergency Notification Evacuation Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander4 Emergency Notification Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage without removing the signal. The Commander4 Emergency Notification Evacuation Series appliances are UL 1638 and UL464 listed and is warranted for three years from the date of purchase.

    Features
  • Nominal Voltage - 24VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 75, 95 and 115 candela
  • Unit Dimensions: 6” x 2.6”
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Synchronize Strobe and Horn Using the Gentex SynchronizationModule
  • Silence Horn while Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate available in red or off-white
  • Gentex Corp 9041378 Emergency Notification Evacuation Horn/Strobe, Selectable Candela Low Profile, No Lettering, Ceiling-Mount, White Faceplate, Blue Lens Gentex Corp 9041382 Emergency Notification Evacuation Horn/Strobe, Selectable Candela Low Profile, No Lettering, Ceiling-Mount, White Faceplate, Red Lens
    The Commander4 Series Emergency Notification Evacuation Signals is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Application include sever weather, evacuation, emergency response and many more.

    The GC Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 75, 95 and 115 candela. The Commander4 Emergency Notification Evacuation Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander4 Emergency Notification Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage without removing the signal. The Commander4 Emergency Notification Evacuation Series appliances are UL 1638 and UL464 listed and is warranted for three years from the date of purchase.

    Features
  • Nominal Voltage - 24VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 75, 95 and 115 candela
  • Unit Dimensions: 6” x 2.6”
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Synchronize Strobe and Horn Using the Gentex SynchronizationModule
  • Silence Horn while Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate available in red or off-white
  • The Commander4 Series Emergency Notification Evacuation Signals is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms for warning and emergency notification. Application include sever weather, evacuation, emergency response and many more.

    The GC Emergency Notification Series are 24VDC units available in lens colors of Amber, Blue, Green and Red. The Series offers tamperproof field selectable candela options of 15, 30, 75, 95 and 115 candela. The Commander4 Emergency Notification Evacuation Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.

    The Commander4 Emergency Notification Series is shipped with the standard 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the product to the bracket without showing any screws.

    The Emergency Notification Series also features the CheckmateTM - Instant Voltage Verification Feature which allows the installer to check the voltage without removing the signal. The Commander4 Emergency Notification Evacuation Series appliances are UL 1638 and UL464 listed and is warranted for three years from the date of purchase.

    Features
  • Nominal Voltage - 24VDC
  • Tamperproof Field Selectable Candela Options of 15, 30, 75, 95 and 115 candela
  • Unit Dimensions: 6” x 2.6”
  • Prewire Entire System, Then Install Your Signals
  • Super-SlideTM Bracket - Ease of Supervision Testing
  • CheckmateTM - Instant Voltage Verification
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof Re-entrant Grill
  • Surface Mount with the GCSB (Gentex Ceiling Surface Mount Box).
  • Synchronize Strobe and Horn Using the Gentex SynchronizationModule
  • Silence Horn while Strobes Remain Flashing
  • Wide Voltage Range 16-33 VDC or FWR
  • Faceplate available in red or off-white
  • United Security Product FE-900 - ADDITIONAL LONG RANGE ENUNCIATOR/HORN STROBE 900MHZ United Security Products CC-300 - 300MHZ Enunciator/Horn Strobe Strobe, Pendant, Wrist Band, Necklace, Belt Clip, AC Adapter
    Long Range! Up to 1000 feet indoors... nearly 1 mile open air. Now... Advanced Wireless technology provides Fall Prevention and Protection without the need of physical restraints! Sensor Pads detect resident’s Attempt to exit, sends the signal to Sound the Alarm Strobe and Get Help Fast! Pressing the "Pause" button on front of transmitter allows care taker to temporarily dis-arm transmitter, allowing Resident/Patient to exit without activating transmitter and alarm. LT-900 sounds audible beeping whenever it is armed and patient gets On or Off sensor pad to remind patient to return to chair or bed and to alert staff to location of patient.

    USP's Best Fall Prevention!


    * Includes Enunciator strobe alarm and Universal Transmitter
    * Operates with Lifetime Sensor Pads
    * Complete packages for Wheelchair, Bed, Floor
    * Transmitter operates with Both Chair and Bed (NC) and Floor and Sensor Strip Pads (NO)
    * Enunciator - low or high sound and strobe
    * Batteries and all accessories included
    * "Pause Feature" Allows short term exits

    The NEW CC-300 Care Caller Gets Help Fast! A tug on the “Pull-for-Help” cord OR pressing the “Pendant Button” signals the Enunciator and locally notifies family, Caretakers or Nursing Staff until help arrives!

    Now you can feel Safe, Secure and at Ease whenever residents, family members, or friends are confined to bed, home or facility and need fast assistance. Care Caller sends the signal to call for help up to 100 feet indoors (open air range is up to 500 feet)!

    The Enunciator sounds the audible horn and flashes the strobe until caretaker resets it. Simple and easy to use because Care Caller is Wireless! It installs in minutes, simply plug in the Enunciator, and you are ready to Get Help Fast when needed! So feel at ease, install the CC-300 Care Caller for a loved one, resident or friend. You’ll be so happy you did!

    United Security Products S120 - 2" Mini Siren - 12VDC USP CE-900 - WIRELESS ENUNCIATER HORN/STROBE FOR USE WITH LONG RANGE 900MHZ SYSTEMS

    • 119 DB at 1 Meter
    • Low current drain 120 mA at 12 VDC
    • Self Contained
    • Size: 2 ¼” x 1 ½”
    Amazing Long Range Care Caller GETS HELP FAST! Pressing the pendant button signals the Enunciator and locally notifies Family, Caretakers or Nursing Staff until help arrives!

    Now you can feel Safe, Secure and at Ease whenever your resident, family member or friend is confined to bed, home or just might need assistance. Care Caller detects the signal to call for help up to 1000 feet indoors (it’s been tested to have an open air range of nearly a mile)! The Enunciator sounds the audible horn and flashes the strobe until caretaker resets it. Simple and easy to use because Care Caller is Wireless! It installs in minutes, simply plug in the Enunciator, and you are ready to Get Help Fast when needed! So set your mind at ease, install the CC-900 Care Caller for a loved one, resident, or friend. You’ll be so happy you did!

    USP FE-300 - ADDITIONAL SHORT RANGE ENUNCIATOR/HORN STROBE
    FA-300- 5 Bed System with TR-300 transmitter, Enunciator, 18” x 24” Sensor Pad, AC Adapter

    US-FA3005 Fall Alert System - Wireless SHORT RANGE Fall Prevention System

    Monitors up to 40 residents. Now... Advanced Wireless technology provides Fall Prevention and Protection without the need of physical restraints! Sensor Pads detect resident's Attempt to exit, sends the signal to the Enunciator horn strobe to Get Help Fast!
    USP's Low Cost - High Performance

  • Includes Enunciator strobe alarm and Universal Transmitter
  • Operates with Lifetime Sensor Pads
  • Complete Packages for Wheelchair, Bed, Floor or customize your own system
  • Transmitter operates with Both Chair and Bed (NC) and Floor and Sensor Strip Pads (NO)
  • Enunciator - low or high sound and strobe
  • Monitors 1-40 residents; Short Range transmitters
  • Batteries and all accessories included
  •    
     
    United Security Product
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please