|
|
|
|
|
|
|
|
|
|
8132iPK-OPKT Includes: 8132ipk Touchscreen, Optiflex, Opticoax-3, Transformer, Power Supply
|
Honeywell’s Opticam is a security camera that transmits video to an Optiflex video controller through standard Category 5 cable using RJ45 connectors. Opticam uses a high quality CCD image sensor and has a compact design for flexible mounting. All signals and power are carried by one cable making for fast and convenient installation. CCD color camera 1/3 inch CCD image sensor 330 lines horizontal resolution RJ45 connector Operates on 12VDC Powered from Optiflex video controller via CAT-5 CAT-5 video transmission capability 3.6 mm f2 lens included 1 lux @ F=2 Automatic white balance Automatic gain control Gamma correction 0.5 Sync system: internal Removable mounting bracket and hardware included Optiflex – Remote viewing through AlarmNet’s Optiflex Video Services
 HIGH LOW
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects NTSC camera via coax to Opticoax-1. Use CAT-5 cable to connect Opticoax-1 to Optiflex. Separate power must be supplied to camera.
|
Opticoax-3 connects three NTSC cameras to three Optiflex camera inputs by converting coax to RJ45. Use CAT-5 cable to connect Opticoax-3 to Optiflex. Separate power must be supplied to camera.
|
|
|
|
|
|
|
|
|
|
|
|
|
Honeywell’s Optiflex Interactive Video System provides secure, cost effective video solutions for residential and commercial applications. Installation does not compromise network security or require manipulation of firewalls. The state-of-the-art video controller lets you view cameras around your home or business right at your video monitor, integrated television or on your computer anywhere over the Internet, with the assurance that your privacy is protected with the highest level of data security available. Features Local Touch Viewing - Compatible with 8132/8132i touchscreen interface
- 6 video inputs
- RJ45 connectors
- Supports NTSC color or B/W cameras
- Camera identification
- Time and date stamping
- Selectable single or quad display
- NTSC monitor output
- Guard tour viewing with programmable dwell time
Secure Remote Viewing - Firewall friendly installation
- Video transmission via internet
- Remote viewing of multiple locations with symphony services
- Password protection
- Selectable single or quad display
Local PC Viewing - Local PC viewing capability of Optiflex video transmissions
Optiflex – Remote viewing through AlarmNet’s Optiflex Video Services
HIGH LOW
|
Kit includes: OPTIFLEX VIDEO PROCESSOR, 1361 AC TRANSFORMER 16.5V 40VA, AD12612 POWER SUPPLY, 1.2 AMP 6-12VDC Honeywell’s Optiflex Interactive Video System provides secure, cost effective video solutions for residential and commercial applications. Installation does not compromise network security or require manipulation of firewalls. The state-of-the-art video controller lets you view cameras around your home or business right at the video monitor, integrated television or on your computer anywhere over the Internet, with the assurance that your privacy is protected with the highest level of data security available. Electrical
• Power 12VDC nominal
• Video 1Vp-p unbalanced
• Current: 600mA does not include cameras
Video
• Video Standard: NTSC
• Video Inputs:6 RJ45 connectors
• Resolution:
– Single camera: 320 x 240
– Quad Display: 160 x 120
• Video Storage:
– Flash Memory: 19 captures of up to 10 frames each
– FIFO logic
• Local Refresh Rate:
– 4 frames per second for single camera viewing
– Quad view approx. 1 frame per second
Remote Transmission
• WAN/LAN Interface 10 Base-T
Ethernet
• Compression technology: JPEG
• Rate: 4 frames per second
Triggers
• Event driven video capture
• Eight 12v positive triggers
• Panel programmable emulation triggers (compatible controls only) Adapters
• Opticoax adapters allow any standard BNC camera to be converted to RJ45 connection for CAT-5 cabling to Optiflex Optiflex – Remote viewing through AlarmNet’s Optiflex Video Services
HIGH LOW
|
|
|
|
|
|
|
|
|
|
|
|
|
Kit includes: OPTIFLEX VIDEO PROCESSOR , OPTICAM-CC12 CAMERA, CCD, AD12612 POWER SUPPLY, 1.2 AMP 6-12VDC , 1361 AC TRANSFORMER 16.5V 40VA Honeywell’s Optiflex Interactive Video System provides secure, cost effective video solutions for residential and commercial applications. Installation does not compromise network security or require manipulation of firewalls. The state-of-the-art video controller lets you view cameras around your home or business right at the video monitor, integrated television or on your computer anywhere over the Internet, with the assurance that your privacy is protected with the highest level of data security available. Electrical
• Power 12VDC nominal
• Video 1Vp-p unbalanced
• Current: 600mA does not include cameras
Video
• Video Standard: NTSC
• Video Inputs:6 RJ45 connectors
• Resolution:
– Single camera: 320 x 240
– Quad Display: 160 x 120
• Video Storage:
– Flash Memory: 19 captures of up to 10 frames each
– FIFO logic
• Local Refresh Rate:
– 4 frames per second for single camera viewing
– Quad view approx. 1 frame per second
Remote Transmission
• WAN/LAN Interface 10 Base-T
Ethernet
• Compression technology: JPEG
• Rate: 4 frames per second
Triggers
• Event driven video capture
• Eight 12v positive triggers
• Panel programmable emulation triggers (compatible controls only) Adapters
• Opticoax adapters allow any standard BNC camera to be converted to RJ45 connection for CAT-5 cabling to Optiflex Video Security Camera Honeywell’s Opticam is a security camera that transmits video to an Optiflex video controller through standard Category 5 cable using RJ45 connectors. Opticam uses a high quality CCD image sensor and has a compact design for flexible mounting. All signals and power are carried by one cable making for fast and convenient installation. Opticam-CC12 - CCD color camera
- 1/3 inch CCD image sensor
- 330 lines horizontal resolution
- RJ45 connector
- Operates on 12VDC
- Powered from Optiflex video controller via CAT-5
- CAT-5 video transmission capability
- 3.6 mm f2 lens included
- 1 lux @ F=2
- Automatic white balance
- Automatic gain control
- Gamma correction 0.5
- Sync system: internal
- Removable mounting bracket and hardware included
Optiflex – Remote viewing through AlarmNet’s Optiflex Video Services
HIGH LOW
|
Kit includes: OPTIFLEX VIDEO,PROCESSOR, 2 x OPTICAM-CC12 CAMERA,CCD FOR OPTIFLEX, AD12612 POWER SUPPLY, 1.2 AMP 6-12VDC, 1361 AC TRANSFORMER 16.5V 40VA Honeywell’s Optiflex Interactive Video System provides secure, cost effective video solutions for residential and commercial applications. Installation does not compromise network security or require manipulation of firewalls. The state-of-the-art video controller lets you view cameras around your home or business right at the video monitor, integrated television or on your computer anywhere over the Internet, with the assurance that your privacy is protected with the highest level of data security available. Electrical
• Power 12VDC nominal
• Video 1Vp-p unbalanced
• Current: 600mA does not include cameras
Video
• Video Standard: NTSC
• Video Inputs:6 RJ45 connectors
• Resolution:
– Single camera: 320 x 240
– Quad Display: 160 x 120
• Video Storage:
– Flash Memory: 19 captures of up to 10 frames each
– FIFO logic
• Local Refresh Rate:
– 4 frames per second for single camera viewing
– Quad view approx. 1 frame per second
Remote Transmission
• WAN/LAN Interface 10 Base-T
Ethernet
• Compression technology: JPEG
• Rate: 4 frames per second
Triggers
• Event driven video capture
• Eight 12v positive triggers
• Panel programmable emulation triggers (compatible controls only) Adapters
• Opticoax adapters allow any standard BNC camera to be converted to RJ45 connection for CAT-5 cabling to Optiflex Video Security Camera Honeywell’s Opticam is a security camera that transmits video to an Optiflex video controller through standard Category 5 cable using RJ45 connectors. Opticam uses a high quality CCD image sensor and has a compact design for flexible mounting. All signals and power are carried by one cable making for fast and convenient installation. Opticam-CC12 - CCD color camera
- 1/3 inch CCD image sensor
- 330 lines horizontal resolution
- RJ45 connector
- Operates on 12VDC
- Powered from Optiflex video controller via CAT-5
- CAT-5 video transmission capability
- 3.6 mm f2 lens included
- 1 lux @ F=2
- Automatic white balance
- Automatic gain control
- Gamma correction 0.5
- Sync system: internal
- Removable mounting bracket and hardware included
Optiflex – Remote viewing through AlarmNet’s Optiflex Video Services
HIGH LOW
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTIFLEX-SKT Includes: 8132ipk Touchscreen, Optiflex, 1361 Transformer, AD12612 Power Supply Optiflex – Remote viewing through AlarmNet’s Optiflex Video Services
HIGH LOW
|
Honeywell’s Optiflex Interactive Video System provides secure, cost effective video solutions for residential and commercial applications. Installation does not compromise network security or require manipulation of firewalls. The state-of-the-art video controller lets you view cameras around your home or business right at the video monitor, integrated television or on your computer anywhere over the Internet, with the assurance that your privacy is protected with the highest level of data security available. Electrical • Power 12VDC nominal
• Video 1Vp-p unbalanced
• Current: 600mA does not include cameras
Video
• Video Standard: NTSC
• Video Inputs:6 RJ45 connectors
• Resolution:
– Single camera: 320 x 240
– Quad Display: 160 x 120
• Video Storage:
– Flash Memory: 19 captures of up to 10 frames each
– FIFO logic
• Local Refresh Rate:
– 4 frames per second for single camera viewing
– Quad view approx. 1 frame per second Remote Transmission • WAN/LAN Interface 10 Base-T
Ethernet
• Compression technology: JPEG
• Rate: 4 frames per second Triggers • Event driven video capture
• Eight 12v positive triggers
• Panel programmable emulation triggers (compatible controls only) Adapters
• Opticoax adapters allow any standard BNC camera to be converted to RJ45 connection for CAT-5 cabling to Optiflex Video Security Camera Honeywell’s Opticam is a security camera that transmits video to an Optiflex video controller through standard Category 5 cable using RJ45 connectors. Opticam uses a high quality CCD image sensor and has a compact design for flexible mounting. All signals and power are carried by one cable making for fast and convenient installation. Opticam-CC12 - CCD color camera
- 1/3 inch CCD image sensor
- 330 lines horizontal resolution
- RJ45 connector
- Operates on 12VDC
- Powered from Optiflex video controller via CAT-5
- CAT-5 video transmission capability
- 3.6 mm f2 lens included
- 1 lux @ F=2
- Automatic white balance
- Automatic gain control
- Gamma correction 0.5
- Sync system: internal
- Removable mounting bracket and hardware included
Optiflex – Remote viewing through AlarmNet’s Optiflex Video Services
HIGH LOW
|
|
|
|
|
|
|
|
|
|
|
|
|
Nuvico CDW21NB 1/3" CMOS, 540 TVL, 2.8~10MM A/I Lens, Wide Dynamic Range , Dual Volatge - Black Housing - CDW21NB
|
Honeywell’s WAP (Wireless Access Point) provides secure, wireless networking ability (Wi-Fi) in IPCAM installations. It connects easily to a port on a router and is configured with iPCAMs using Wi-Fi Protected Setup (WPS).
Total Connect Remote Video Services, part of Honeywell’s suite of Total Connect digital communications services, lets end-users view activity around the interior or exterior of their homes or businesses on PCs or mobile devices over a highly secure Internet connection.
|
|
|
