|
|
|
|
|
|
|
|
|
|
DESCRIPTION The ACE20 is an attractive, low-profile surface mount unit. It’s made of high-impact
polycarbonate, with a viewing window made of the same sturdy material.
The ACE20 is easy to install, and the molded-in hinge makes camera access easy as well.
Tamperresistant fasteners are included to protect the camera equipment from vandals.
The camera bracket is fully adjustable, and allows the camera to be either top or bottom mounted. FEATURES • Off-white, high-impact polycarbonate housing and window
• Easy installation to any type of ceiling
• Tamper-resistant fasteners
• Molded-in hinge to allow easy access from below
• Fully adjustable camera bracket for top or bottom mounting
• Right-angle BNC connector included for longer length cameras
• Also available as a VideoKit™ model with camera
|
DESCRIPTION The ACH13 is an outdoor, environmental housing that can accommodate camera/ lens combinations up to 10.5” long and 3.6” wide.
The body is an attractive white finish with black end caps.
A heater/blower, sunshield and red fl ashing light kit are available. FEATURES • Side hinge for easy access when servicing
• Accepts many lens and camera combinations
• Designed to meet IP65 standards
• Optional 24 VAC heater/blower, sunshield and red fl ashing light kit
• Optional DECO1 polycarbonate wall mount isolates camera from electrical ground or WM800 light-duty steel bracket
|
|
|
|
|
|
|
|
|
|
|
|
|
Features: - IP Network Ready Outdoor Environmental hsg with metal wall/pole mount
- 12Vdc input (ideal for solar and battery powered applications)
- Thermostatically controlled heater/blower, for an IP Network camera
- 20vA transformer
Works with fixed camers by: - Axis
- JVC
- Panasonic
- Sony
|
Features: - IP Network Ready Outdoor Environmental hsg with metal wall/pole mount
- w/24Vac input, 12 or 24 output for camera
- Thermostatically controlled heater/blower, for an IP Network camera
- 20vA transformer
- 40vA transformer
- MCL 10.5”
Works with fixed camers by: - Axis
- JVC
- Panasonic
- Sony
|
|
|
|
|
|
|
|
|
|
|
|
|
DESCRIPTION: The ACH8 is an outdoor, environmental housing that can accommodate camera/ lens combinations up to 7.5”. The body is an attractive white finish with black end caps. A heater/blower, sunshield and red flashing light kit are available. FEATURES: • Side hinged for easy access when servicing
• Accepts many lens and camera combinations
• Designed to meet IP65 standards
• Optional 24 VAC heater/blower, sunshield and red flashing light kit
• Optional WM800 light-duty steel bracket
• Also available as a VideoKit™ model with camera
|
DESCRIPTION: The ACN90 housing is designed for indoor corner mount situations. It has a low profile, which makes this attractively styled unit ideal for offices, hallways and conference rooms. The off-white, injection-molded polycarbonate indoor housing will accept a 6” maximum length camera. Each unit also features tamper resistant fasteners. FEATURES: • Attractive low-profi le styling
• Injection molded, off-white polycarbonate plastic
• Comes with completely adjustable camera bracket
• Convenient cable access slots
• Tamper resistant fasteners
• Right-angle BNC connector is included to accommodate maximum camera lengths
• Also available as a VideoKit™ model with camera
|
|
|
|
|
|
|
|
|
|
|
|
|
DESCRIPTION: The AD16 aluminum outdoor housing offers outstanding protection for your camera. The AD16 is sealed to protect from dust particles that could damage camera equipment. Includes an integrated heater, and is available as VideoKitmodel. FEATURES: Aluminum body, glass window
Integrated heater/defogger
Three liquid tight fittings for wiring
Optional sunshield
Optional metal mount
Available as VideoKit models with camera
|
DESCRIPTION: These are heavy-duty, all-steel housings. The AMS180 if for wall or ceiling installations and the AMS90 is a corner mount. Designed to house a solid-state camera and lens, the steel construction provides maximum protection for the equipment. They are both for indoor applications and, with an optional heater, protected outdoor sites. FEATURES: Vandal-Resistant Indoor 14-gauge Steel hsg
corner mount
w/security access lock plus WindowGuard Paint Shield(s) - 3 clear and 2 tinted
for a fixed camera
MCL 8
Includes mounting hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
DESCRIPTION: The AP16 aluminum outdoor housing offers an outstanding protection for your camera. The AP16 is pressurized to seal out dust, moisture, insects, and pollution. In-the-field pressurization is easy with the Schraeder valve included on each unit. Includes an integrated heater, and is available as VideoKit™model. FEATURES: 16” Pressurized Outdoor tubular hsg w/115Vac input
heater
for a fixed camera
|
DESCRIPTION: The BMT10 is a bullet resistant environmental camera housing. It features a 7-gauge steel body, and is designed and constructed to meet or exceed a Level II protection per UL standard 752. The enclosure has an integrated tilt bracket that protects all wiring and allows for surface mount applications. Camera/lens combinations up to 9.5” long and 3.25” wide can be accommodated by the BMT10, plus an innovative camera sled allows the camera to be rotated 360° within the housing to allow for any mount position. FEATURES: Steel Bullet-Resistant Outdoor hsg w/Window Guard™ paint shield
plus 115Vac heater/thermostat (Level III)
|
|
|
|
|
|
|
|
|
|
|
|
|
DESCRIPTION: The DEC01 is a light-duty, decorative wall mount designed for the ACH13 and the BlackHawk™ indoor/outdoor camera housings. FEATURES: • Mounts easily to wall
• Swivel head adapters can be rotated independently
• Black, textured powdercoat finish
|
DESCRIPTION The 0124 is an indoor discreet 12” dome housing designed to replace a 2’ x 2’ ceiling tile. The top of the housing, constructed from fire-rated ABS plastic, is completely enclosed. Servicing is done by detaching the lower dome, which is secured by a safety wire attached to the upper body. The unit accepts one or two standard body cameras which can be easily accessed through the removable dome. FEATURES • Comes complete with liner for total discreet viewing
• Accepts one or two standard body cameras
• Lightweight fire retardant plastic body
• Clear or distortion free tinted dome available (1 F-stop light reduction)
• Works well with both color and black and white cameras
• Can be serviced from below ceiling
• Also available as a Q-View model with up to four cameras ARCHITECTURAL/ENGINEERING SPECIFICATIONS The O124CL housing shall come complete with a fire retardant plastic top, one fixed camera bracket, black opaque liner and 12” clear or tinted lower dome. The plastic top shall be supported by a galvanized bracket, which shall contain a cable strain relief and receptacles for a maximum of two fixed cameras. The lower dome shall also house an inner liner for total discreet viewing. A safety wire shall be used to secure the lower dome to the upper body when servicing the internal components.
|
|
|
