Home > CCTV / Surveillance > Housings & Mounts > Videolarm > Housings >

  Videolarm VL-ACH13HB15 IP Network Ready Outdoor Housing with WM1500 Wall Mount

Videolarm VL-ACH13HB15 IP Network Ready Outdoor Housing with WM1500 Wall Mount


 

Our Price : $333.00


Product Code: VIDEOLARMVLACH13HB15

Qty:

Description Specifications
 
Videolarm VL-ACH13HB15 IP Network Ready Outdoor Housing with WM1500 Wall Mount


The environmental ACH13 is an outdoor housing that can accommodate camera/ lens combinations up to 10.5" long and 3.6" wide. This housing is IP Network Ready, & can be equipped with either a 24vac or 12vdc heater/blower. The finish is a shiny white but end caps are black polycarbonate. Sunshield, tamper-resistant fasteners are also available. The ACH13 environmental housing shall be constructed from two extruded aluminum (.08" wall thickness, white finish) halves and two injection-molded polycarbonate end caps. It is capable of accommodating a camera/ lens combinations up to 10.5" long and 3.6" wide. A clear polycarbonate viewing window shall be ultrasonically welded to the inside of the front end cap, creating a watertight seal. The rear end cap shall have molded standoffs on the inside surface for easy mounting of the optional blower. The top of the housing shall be hinged from the side to allow accessibility to the camera by one screw in each end cap. Camera adjustment or removal shall be provided via one screw located in the key hole slot on the aluminum camera sled. An optional 25 vA heater may be mounted to the inside of the bottom extrusion, directly behind the viewing window, for defogging and deicing. Four vent plugs (2 in front, 2 in rear) will create a positive air flow (front to rear) when the blower is in use. Two watertight strain relief plugs will be located at the rear of the housing for separate coax and power cable entry.

Features
  • IP Network Ready
  • Side hinge for easy access when servicing
  • Accepts many lens and camera combinations
  • Wireless option
  • Optional 24 vac heater/blower, sunshield
  • Optional WM800, light-duty steel bracket
  • 12 or 24 output for camera, thermostatically controlled heater/blower, for an IP Network camera
  • 40vA transformer, MCL 10.5" To be used with Videolarm's PB24L24/58 Wireless Power Box.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

CCTV / Surveillance > Housings & Mounts > Videolarm > Housings
CCTV / Surveillance > Housings & Mounts > Videolarm
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please