You are here: Home > Burglar Alarms / Intrusion >

Keypads for Burglar Alarm Systems

>

Wireless Keypads for Burglar Alarm Systems

> Visonic
We found 4 results matching your criteria.
Visonic Wireless Keypads
Sort By:
Page of 1
Visonic MCM-140 Universal Remote Commander for PowerMax and PowerCode Wireless Systems VISONIC MCM-140 Wireless Keypad - VISONIC MCM140
The MCM-140 is the universal wireless portable remote control unit for the PowerMax and other Visonic PowerCode security and home automation systems. It enables easy programming, arming and disarming of the PowerMax system. Among other functions, MCM-140 also enables controlling X-10 devices from anywhere in the home or office, using PowerMax keypad commands.

The MCM-140 employs Visonic's PowerCode wireless technology featuring 16 million possible code combinations and smart, anti-collision transmission algorithms. For arming, disarming and security functions, the MCM-140 utilizes Visonic's CodeSecure™ wireless technology. Featuring over 100 million possible combinations and proprietary rolling code encryption algorithm, CodeSecure prevents "code grabbing" by potential intruders.

This ergonomically designed remote commander is available in several optional frequencies in compliance with European, U.S. and other international standards. It is powered by a standard long life Lithium battery with visible and transmitted low battery alarms. A wall-mounted bracket enables mounting the unit in the most convenient place.

VISONIC MCM-140 Wireless Keypad - VISONIC MCM140


The MCM-140 is the universal wireless portable remote control unit for the PowerMax™ and other Visonic PowerCode™ security and home automation systems. It enables easy programming, arming and disarming of the PowerMax™ system. Among other functions, MCM-140 also enables controlling X-10 devices from anywhere in the home or office, using PowerMax™ keypad commands
The MCM-140 employs Visonic's PowerCode™ wireless technology featuring 16 million possible code combinations and smart, anti-collision transmission algorithms. For arming, disarming and security functions, the MCM-140 utilizes Visonic's CodeSecure™ wireless technology. Featuring over 100 million possible combinations and proprietary rolling code encryption algorithm, CodeSecure™ prevents "code grabbing" by potential intruders
This ergonomically designed remote commander is available in several optional frequencies in compliance with European, U.S. and other international standards. It is powered by a standard long life Lithium battery with visible and transmitted low battery alarms. A wall-mounted bracket enables mounting the unit in the most convenient place

VISONIC MKP-150 Encrypted Two-Way Wireless Keypad For Use With Powermax+ - VISONIC MKP150 Visonic MKP150 Two-way wireless keypad with voice
VISONIC MKP-150 Encrypted Two-way Wireless Keypad For Use With Powermax+ - VISONIC MKP150


The MCX-8 is an 8-zone output expander designed to increase the number of outputs of the MCR-308 wireless receiver. Up to three MCX-8 expanders, with eight "open collector" outputs each, can be added to the MCR-308 via a supervised communication bus. Dry contact outputs can be provided if needed, using the RL-8 relay module that converts 8 open collector outputs to dry contact outputs
For maximum convenience, the expander modules can be installed either close to the receiver or at the control panel end, with a distance of up to 1 kilometer (0.62 mile) between the receiver and the expanders. The MCR-308 receiver continuously monitors the communication bus, issuing inactivity alerts in case the connection is interrupted
The MCX-8's printed circuit board is enclosed in a plastic cabinet for easy installation and added protection. The base can accommodate one or two MCX-8 units, or an MCX-8 and an MCR-308 unit. For tamper protection, an on-board switch is activated when the front cover is removed

The MKP-150 is a two-way wireless keypad for PowerMax®+ and PowerMaxPro systems. Once installed and programmed, the keypad provides all of the controls, notifications, indications and voice prompts of the control panel.

The MKP-150 employs Visonic's two-way wireless secured communication protocol and provides both audible and visual feedback including voice prompts as it carries out the operator's commands to the control panel. Conveniently, the MKP-150 can be used to arm or disarm the system, turn lights on and off, control electrical appliances and much more.

The MKP-150 can be placed in a convenient, easily-accessible location, enabling the control panel to be installed in a location inaccessible to intruders. In case of tampering or sabotage, an alarm sounds and the event is recorded by the control panel. Owners can also install a second keypad in the garage, pool house, or at bedside for convenient arming and control before going to sleep.

The MKP-150 keypad is available in several optional frequencies in compliance with European, U.S. and other international standards.

MKP-150 features: Compatible with PowerMax+ and PowerMaxPro systems Provides all of the same controls, notifications, indications and voice prompts of the control panel. Used to arm or disarm the system, turn lights on and off, control electrical appliances and much more Easy programming and user-friendly control Family Message Center enabling family members to record and playback voice memos for one another Automatic reporting to control panel of low battery, AC failure, RF jamming, and tampering Built-in tamper switch Visual indicators (LED and LCD) and audible notifications Screen saver to conceal system status Two long-life 3-volt lithium batteries Available in several optional frequencies in compliance with international standards.
   
 
Visonic Wireless Keypads
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please