You are here: Home > Burglar Alarms / Intrusion >

Accessories for Burglar Alarm Systems

>

Antenna for Burglar Alarms Systems

>

Weatherproof Antennas for Burglar Alarm Systems

We found 15 results matching your criteria.
Burglar alarms protect you and your property, but your alarm system needs protection from the weather. Security Store USA’s inventory of weatherproof antennas defends against the elements using alarm systems components and coatings that are resistant to UV radiation, produce low wind drag, and are sealed against moisture. Our shock-resistant line of commercial and home alarm weatherproof antennas can be mounted using special ruggedized accessories.
Sort By:
Page of 2
CDW-Select 1138176 Linksys Antenna 9DBI Honeywell GSM-ANT3DB  Weatherproof Remote Antenna
Increase the range of the Wireless network for your Business! Attach these antennas to the WAP54GPE Exterion Access Point and increase both the effective strength of the outgoing signals and the receive sensitivity of the incoming signals.

The added signal strength and sensitivity also improves mid-range communication reliability because every packet comes through "loud and clear", reducing retransmissions due to weak signal reception errors.

The 9dBi signal strength allows the signals to travel further and detect the signals stronger in a 360 degree radius.

The weatherproof housing is able to withstand harsh outdoor conditions. The HGA9N includes a lightning surge protector, mounting kit, and cable.

  • High-powered 9 dBi Omni-Directional Antenna increases the signal strength of the WAP54GPE Access Point for wireless coverage around 360 degree radius
  • Omni-Directional Antenna makes coverage unconstrained to a specific area
  • Lightning protector and weatherproof for safe deployment on the exterior of your building
  • Easy to install - no software configuration is required
  • Honeywell offers remote antennas designed to increase GSM signal transmission capability. These durable, low-profile antennas are designed to allow flexible integration with GSM communication devices.

    The GSM-ANT3dB Weatherproof Remote Antenna optimizes transmissions with field diversity technology. Its versatile, weatherproof design is suitable for indoor or outdoor applications.

  • Frequency Range: 824-896 MHz
  • 1850-1990MHz
  • Average Gain: 3dB
  • Maximum power: 100W
  • Nominal impedance: 50Ω
  • Pattern: Omni Directional
  • Termination: N Female
  • Operating Temperature: -40°C to 85°C
  • Fully Weatherproof for Outdoor Application
  • Honeywell GSM3DB25KT  Includes GSM-ANT3DB antenna, WA7626-CA SMA to N adaptor Cable, 25 ft Coax Cable Honeywell GSM3DB50KT  Includes GSM-ANT3DB antenna, WA7626-CA SMA to N adaptor cable, 50 ft.coax cable

    Honeywell offers remote antennas designed to increase GSM signal transmission capability. These durable, low-profile antennas are designed to allow flexible integration with GSM communication devices.

    The GSM-ANT3dB Weatherproof Remote Antenna optimizes transmissions with field diversity technology. The versatile, weatherproof design is suitable for indoor or outdoor applications.

  • Frequency Range: 824-896 MHz
  • 1850-1990MHz
  • Average Gain: 3dB
  • Maximum power: 100W
  • Nominal impedance: 50Ω
  • Pattern: Omni Directional
  • Termination: N Female
  • Operating Temperature: -40°C to 85°C
  • Fully Weatherproof for Outdoor Application
  • Honeywell offers remote antennas designed to increase GSM signal transmission capability. These durable, low-profile antennas are designed to allow flexible integration with GSM communication devices.

    The GSM-ANT3dB Weatherproof Remote Antenna optimizes transmissions with field diversity technology. The versatile, weatherproof design is suitable for indoor or outdoor applications.

  • Frequency Range: 824-896 MHz
  • 1850-1990MHz
  • Average Gain: 3dB
  • Maximum power: 100W
  • Nominal impedance: 50Ω
  • Pattern: Omni Directional
  • Termination: N Female
  • Operating Temperature: -40°C to 85°C
  • Fully Weatherproof for Outdoor Application
  • Honeywell GSM3DBKT  Includes GSM-ANT3DB antenna and WA7626-CA SMA to N adaptor cable Microtek 1MTRD 1 Meter Dish Receiver Antenna
    GSM3DBKT Includes GSM-ANT3DB antenna and WA7626-CA SMA to N adaptor cable

    Honeywell offers remote antennas designed to increase GSM signal transmission capability. These durable, low-profile antennas are designed to allow flexible integration with GSM communication devices.

    The GSM-ANT3dB Weatherproof Remote Antenna optimizes transmissions with field diversity technology. The versatile, weatherproof design is suitable for indoor or outdoor applications.

  • Frequency Range: 824-896 MHz
  • 1850-1990MHz
  • Average Gain: 3dB
  • Maximum power: 100W
  • Nominal impedance: 50Ω
  • Pattern: Omni Directional
  • Termination: N Female
  • Operating Temperature: -40°C to 85°C
  • Fully Weatherproof for Outdoor Application
  • Accessory Features:

    • Weather enclosure – can be painted any nonmetallic color

    • Wall & Pole mount hardware included

    • Multiple transmitter/receiver mounting configurations available

    • LNB mounting hardware included with ML 5.8- 1000E & 2500E

    • Mounting block included in weather enclosure with ML 5.8 series

    • 18 inch & 1 meter dish antennas for ML 5.8 series

    • 6” x 6” patch antenna for ML 5.8 series

    • 4” x 5” & 12” x 12” patch antenna for ML 2.4 series and ML Data 2400

    • 36” grid dish for ML 2.4 series

    • 41.5” yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:615798312343

    Microtek 34P 3x4" Patch Antenna Microtek 3DGH 3' Grid Disk Antenna
    Accessory Features:

    • Weather enclosure – can be painted any nonmetallic color

    • Wall & Pole mount hardware included

    • Multiple transmitter/receiver mounting configurations available

    • LNB mounting hardware included with ML 5.8- 1000E & 2500E

    • Mounting block included in weather enclosure with ML 5.8 series

    • 18 inch & 1 meter dish antennas for ML 5.8 series

    • 6” x 6” patch antenna for ML 5.8 series

    • 4” x 5” & 12” x 12” patch antenna for ML 2.4 series and ML Data 2400

    • 36” grid dish for ML 2.4 series

    • 41.5” yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892000302

    Accessory Features:

    • Weather enclosure – can be painted any nonmetallic color

    • Wall & Pole mount hardware included

    • Multiple transmitter/receiver mounting configurations available

    • LNB mounting hardware included with ML 5.8- 1000E & 2500E

    • Mounting block included in weather enclosure with ML 5.8 series

    • 18 inch & 1 meter dish antennas for ML 5.8 series

    • 6” x 6” patch antenna for ML 5.8 series

    • 4” x 5” & 12” x 12” patch antenna for ML 2.4 series and ML Data 2400

    • 36” grid dish for ML 2.4 series

    • 41.5” yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892001903

    Microtek DATADPL Dipole Antenna, 1/2" Wave used with Minilink ML Data 900 Systems Microtek ML58LNBP Mini Link 5.8LNB With 6" Patch Antenna
    Accessory Features:

    • Weather enclosure – can be painted any nonmetallic color

    • Wall & Pole mount hardware included

    • Multiple transmitter/receiver mounting configurations available

    • LNB mounting hardware included with ML 5.8- 1000E & 2500E

    • Mounting block included in weather enclosure with ML 5.8 series

    • 18 inch & 1 meter dish antennas for ML 5.8 series

    • 6” x 6” patch antenna for ML 5.8 series

    • 4” x 5” & 12” x 12” patch antenna for ML 2.4 series and ML Data 2400

    • 36” grid dish for ML 2.4 series

    • 41.5” yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.

    Accessory Features:

    • Weather enclosure – can be painted any nonmetallic color

    • Wall & Pole mount hardware included

    • Multiple transmitter/receiver mounting configurations available

    • LNB mounting hardware included with ML 5.8- 1000E & 2500E

    • Mounting block included in weather enclosure with ML 5.8 series

    • 18 inch & 1 meter dish antennas for ML 5.8 series

    • 6” x 6” patch antenna for ML 5.8 series

    • 4” x 5” & 12” x 12” patch antenna for ML 2.4 series and ML Data 2400

    • 36” grid dish for ML 2.4 series

    • 41.5” yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.

    Microtek PAT1212 12x12" Patch Antenna 17DBI HW Microtek RD7 7" Rubber Duck Antenna
    Accessory Features:

    • Weather enclosure – can be painted any nonmetallic color

    • Wall & Pole mount hardware included

    • Multiple transmitter/receiver mounting configurations available

    • LNB mounting hardware included with ML 5.8- 1000E & 2500E

    • Mounting block included in weather enclosure with ML 5.8 series

    • 18 inch & 1 meter dish antennas for ML 5.8 series

    • 6” x 6” patch antenna for ML 5.8 series

    • 4” x 5” & 12” x 12” patch antenna for ML 2.4 series and ML Data 2400

    • 36” grid dish for ML 2.4 series

    • 41.5” yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.

    Accessory Features:

    • Weather enclosure – can be painted any nonmetallic color

    • Wall & Pole mount hardware included

    • Multiple transmitter/receiver mounting configurations available

    • LNB mounting hardware included with ML 5.8- 1000E & 2500E

    • Mounting block included in weather enclosure with ML 5.8 series

    • 18 inch & 1 meter dish antennas for ML 5.8 series

    • 6” x 6” patch antenna for ML 5.8 series

    • 4” x 5” & 12” x 12” patch antenna for ML 2.4 series and ML Data 2400

    • 36” grid dish for ML 2.4 series

    • 41.5” yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892000203

       
     
    Weatherproof Antennas for Burglar Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please