• Dimensions: 7.4”W x 4.8”H x 1.46”D. (188mm x 122mm x 37mm)
• Frequency of Operation: 345MHz
• Sounder: Speaker
• Electric: 110VAC input, 5.0V Regulated DC output, 220mA
• Battery: 9V Lithium, ADEMCO 465 Ultralife
• Power Pack (Optional):
  - 110VAC input/9 Volt DC output,
  - 100mA ADEMCO P/N N7591
• 9VDC Power Pack Cord: ADEMCO P/N N7703
• LCD Display: Supertwist 2 lines x 16 characters each, backlit
• Sounder: Piezoelectric
• Compatibility: Works with all VISTA control panels (requires 5883 Transceiver). See installation instructions for details.

PL-EVD1C Electronic Vibration Detector - Safe Pak

The EVD-1, Electronic Vibration Detector, is listed by Underwriters Laboratories, Inc. for primary protection of Mercantile or Bank, safe or vault, ATM machines and supplementary protection of interior units such as file cabinets, display cases, walls and ceilings. The detector must be used with an appropriate UL listed control unit.

FEATURES
• Detects all common threats to safes and vaults.
• Sophisticated signal processing provides unprecedented sensitivity without false alarms.
• Low cost, stand alone system.
• Reliable, sensitive piezo sensor technology.
• On board high security safe contact interface.
• Integral, multi-color status LED.
• Built in test circuit.
• Remote test and annunciator capabilities.
• Supervised microprocessor.
• Independent tamper output.
• On board test point facilitates installation and service.
• Built in accumulator.

EVD-1 controller
The EVD-1 controller detects short duration, large amplitude signals like those produced in attacks from explosions, hammering or chiseling. It also detects long duration, small amplitude signals like those produced in attacks from torches, thermic lances, drills, grinders or cutting discs. As soon as the EVD-1 detects a large amplitude alarm source it signals an alarm.

The EVD-2, Electronic Vibration Detector System, is listed by Underwriters Laboratories, Inc. for primary protection of Mercantile or Bank, safe or vault, ATM machines and supplementary protection of interior units such as file cabinets, display cases, walls and ceilings. The System must be used with an appropriate UL listed control unit. The standard EVD-2 system consists of a model EVD-M controller and a model EVD-R remote pickup.

FEATURES
• Detects all common threats to safes and vaults.
• Sophisticated signal processing provides unprecedented sensitivity without false alarms.
• Expandable system allows up to 15 remote pickups, (Model EVD-R).
• Reliable, sensitive piezo sensor technology.
• On board high security safe contact interface.
• Integral, multi-color status LED.
• Built in test circuit on both controller and remote pickups.
• Remote test and annunciator capabilities.
• Supervised microprocessor.
• Independent tamper output.
• On board test point facilitates installation and service.
• Built in accumulator.

EVD-M CONTROLLER
The EVD-M controller detects short duration, large amplitude signals like those produced in attacks from explosions, hammering or chiseling. It also detects long duration, small amplitude signals like those produced in attacks from torches, thermic lances, drills, grinders or cutting discs. As soon as the EVD-M detects a large amplitude alarm source it signals an alarm. The EVD-M controller supports up to 15 EVD-R remote pickups, (or may be used as a stand alone unit), and fully supervises EVDR wiring.

EVD-S SYSTEM 2020200 CONSISTING OF:
1 EVD-C AMPLIFIER 2020127
2 EVD-P PICKUP UNIT 2020126
1 TRANSFORMER 12V 20VA 5270080
1 BATTERY 6V 4AH 5130080
1 EOL RESISTOR ASSEMBLY 2020129

The EVD-S, Electronic Vibration Detector System, is listed by Underwriters Laboratories, Inc. for primary protection of Mercantile or Bank, safe or vault and supplementary protection of interior units such as file cabinets, display cases, walls and ceilings. The System must be used with an appropriate UL listed control unit.

EVD-C PROCESSOR UNIT
The amplifier unit, model EVD-C, provides SPDT alarm contacts for connection into the alarm protective circuit. The EVD-C is housed in a metal cabinet protected by a cover tamper and a housing vibration detector. The housing detector is provided with a housing sensitivity control. A low voltage plug-in transformer and a regulated battery charging circuit maintain the standby battery at a fully charged state.

An auxiliary output is provided to power the APC-B (accumulator option) when required. The battery provides in excess of 80 hours standby operation even if the maximum 6VDC auxiliary output is utilized.

The EVD-C provides an AC on indicator (green LED), a test button, and an alarm indicator (red LED) for subscriber testing of the EVD-S System. Terminals are also provided for connection of a remote test unit, Model PTU-B, and/or connection of dry contacts from any Underwriters Laboratories Listed central station test unit.

From 2 to 15 pickup units may be connected to the EVD-C in a series supervised pickup loop. The supervision of the pickup loop is maintained by a factory adjusted DC differential circuit, which makes a compromise attempt of the pickup loop more difficult.

EVD-P PICKUP UNIT
Model EVD-P pickup units detect sound vibrations in the protected material. These signals are fed to the amplifier unit where the pickup loop sensitivity control determines the signal level necessary to create an alarm condition. A Model EOLR resistor assembly must be installed in the last EVDP. The pickup units are housed in a 4 1/4"H x 3"W x 1 1/4"D metal enclosure with cover and back tampers and are to be mounted with the speaker opening against the protected material.

UL LISTED
Dimensions: 12 1/4"H x 8 3/8"W x 3 1/8"D 31,1cm H x 21,3cm W x 7,9 cm D
Weight: 8 lbs., 3,6 kg.
Enclosure: 18 Gauge - Cold Rolled Steel
Power Input: 12VAC, 20VA, 60Hz
Operating Voltage: 6VDC
Typical Current: 20mA
Alarm Current: 25mA
Contact Ratings: Alarm Relay and Tamper Switch
1.0 Amp at 28VDC
0.1 Amp at 130VDC
Optional Equipment: An APC, Accumulator Pulse Counter, is available for use in applications where extraneous signals may cause false alarms. Mounts in EVD-C housing.