You are here: Home > Burglar Alarms / Intrusion >

Wireless Products for Burglar Alarm Systems

>

Wireless Products Accessories for Burglar Alarm Systems

We found 20 results matching your criteria.
Alarm systems leveraging wireless devices can require a number of accessories ranging from simple to complex. Security Store USA provides wireless product accessories such as home alarm system mountings, casings, and proximity cards. Our selection also includes sophisticated devices such as driveway alarm systems, burglar alarm air quality sensors, and control panel communication devices. In all, no matter what accessories you need, Security Store USA has you covered.
Sort By:
Page of 2
Ademco / Honeywell DCID - Dialer Capture Intelligence Device for LYNX Control Panels Ademco / Honeywell DCID-EXT - Dialer Capture Intelligence Device for Ademco Control Panels (except Lynx) - DCIDEXT
Ademco / Honeywell DCID - Dialer Capture Intelligence Device for LYNX Control Panels Ademco / Honeywell DCID - Dialer Capture Intelligence Device for LYNX Control Panels
ARLINGTON INDUSTRIES 9N-DBK88C Plastic Keypad Enclosure - Clear - ARLINGTON INDUSTRIES 9N-DBK88C ARLINGTON INDUSTRIES 9N-DBK88W Plastic Keypad Enclosure-White - ARLINGTON INDUSTRIES 9N-DBK88W
ARLINGTON INDUSTRIES 9N-DBK88C Plastic Keypad Enclosure - Clear - ARLINGTON INDUSTRIES 9N-DBK88C

ARLINGTON INDUSTRIES 9N-DBK88W Plastic Keypad Enclosure-White - ARLINGTON INDUSTRIES 9N-DBK88W

Corby Industries 14 - SURFACE MOUNT FOR HEAVY DUTY,METAL KEYPAD HID Smart ISOProx II 125 kHz Proximity Card 1397LGSMV
Mounting Box ● Surface mount ● Heavy duty 0.045" thick welded steel with gray corrosion proof coating ● Form A hermetically sealed, plunger type, front mounted tamper switch with two 6" (152mm) wires attached ● Use with any single-gang device ● Front and rear sealing gaskets and mounting hardware included ● Unit has a 0.875"(22 mm) rear hole for exit wiring ● Volume is 18 cubic inches ● 3.31" W x 5.06" L x 1.1" D (84mm x 129mm x 28mm) Smart ISOProx II card (1397): 125 kHz proximity card that can be embedded with a contact smart chip module

  • Smart ISOProx II 125 kHz Proximity Card, Contact Smart Chip Embeddable
  • Allows a contact smart chip module to be embedded on ISO thickness proximity cards for multi-technology applications.
  • Graphics quality surface for use with direct image printers.
  • Smart DuoProx II includes magnetic stripe.
  • Same size and thickness as a standard credit card.
  • Lifetime warranty*.
  • Dimensions: 2.125” x 3.375” x 0.033” (5.40 x 8.57 x 0.084 cm)
  • L - Programmed, Low Frequency (125 kHz). Specify Programming Information.
  • G - Plain White PVC w/ Gloss Finish
  • S - Standard Smart ISOProx II Artwork2
  • M - Sequential Matching Internal/External (Inkjetted)
  • V - Vertical Slot Punch

    MUST SUPPLY: 125 kHz Card Programming Information

    Bit Numbers . (example: 26 bit) Format Number (example: H10301)

    Facility Code .

    (Custom Formats) Site Code . City Code . OEM Code .

    Internal Card No. Start . Stop .

    External Card No. Start . Stop .

    Special Instructions: .

    1 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.

    2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small “HID logo” " " and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.

    3 The external card number is placed in the bottom right-hand corner on the back of the card.

    4 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with the printer manufacturer prior to ordering.

    5 For Laser Engraved external numbers, consult factory for lead times and cost.

  • Macurco AQC-12 Air Quality Controller for use with Alarm Control Panels Mier DA-500CP Drive-Alert Driveway Alarm CONTROL PANEL ONLY
    This controller offers variable sensitivity, 120 VAC operation, one SPDT alarm relay, and adjustable time delay on alarm.
  • Detects cigarette smoke, VOCs and many other gases - recommended coverage: 900 sq. feet.
  • Upon alarm, AQC closes SPDT relay to a control panel or other device.
  • Easy installation, unit mounts flush in a standard 4 x 4 electrical box.
  • No maintenance required, sensors have a 7 to 10 year life expectancy.
  • Detectors have customer adjustable settings for:
    a) sensitivity of the unit to smoke and gases.
    b) Time of activation of relay closure.
  • LED lights show the status of the detector.
  • The AQC-12 and AQC-21 both have supervised sensors and will go into alarm condition if there is an internal failure of the unit.
  • Automatic operation; units automatically reset after alarm or power outage.
  • General purpose detector for cigarette smoke, diesel fumes, VOCs and other hydrocarbons. Primary use is detection of cigarette smoke in non-smoking areas.
  • All units are 100% Gas Tested

    NOTE: These units are NOT suitable as smoke alarms, fire alarms or carbon monoxide detectors. For detection of a specific gas please consult Macurco for the proper detector.
  • BW-DA500CP / DA-500CP Drive-Alert Driveway Alarm CONTROL PANEL ONLY

    The DA-500 Drive-Alert Driveway Alarm System is the security industry's most-often used method for detecting a vehicle when it enters a driveway. A variety of features and options make this unit ideal for both residential and commercial applications.

    The Drive-Alert is a multi-purpose, solid-state electronic alarm system designed to detect vehicle traffic in driveways, farm lanes, intersections, and any areas where nowledge of vehicle movement is desired or necessary.
    The Drive-Alert Driveway Alarm System is a multi-purpose, solid-state electronic alarm system designed to detect traffic in driveways, farm lanes, drive-up windows, or any area where knowledge of vehicle movement is desired.
    The DA-500 Complete system includes the control panel which mounts on a wall and is plugged into a standard outlet, a direct burial sensor, and 100 feet of direct burial cable
    Each system can use up to three DA-051 sensors to monitor movement in multiple areas
    Each sensor has a range of up to 16 diameter
    Cable lengths of up to 2500 feet are available
    Many accessories are available - including light switches, additional whistles, and timer controls
    Other models are available (BW-DA503 & BW-DA504)
    The BW-DA055 (sold separately) is the most popular accessory to the Drive- Alert line of Driveway Alarm and Drive-Up Window Systems. Its perfect for high traffic areas where the standard whistle can become irritating. Emits a pleasant two-tone chime when the DA-500 detects a vehicle.

    Mier DA-503CP Drive-Alert with Chime CONTROL PANEL ONLY VISONIC BR-1 Mounting Bracket For Pirs - VISONIC BR1
    BW-DA503 / DA503 Drive-Alert with Chime

    Drive-Alert Driveway Alarm — Model DA-503 CONTROL PANEL ONLY

    More Features and Easier to Install - The New DA-503 Drive-Alert Driveway Alarm system provides the same dependable method of vehicle detection as the DA-500. However, the DA-503 incorporates built-in X-10 transmitters that use a home's existing electrical wiring to transmit a signal which sounds chimes when a vehicle enters a driveway, or wherever a sensor has been buried. The once difficult and expensive task of hard wiring security sound into rooms and remote areas no longer exists.

    Protecting the home - The Drive-Alert is a multi-purpose, solid-state electronic alarm system designed to detect vehicle traffic in driveways, farm lanes, intersections, and any areas where knowledge of vehicle movement is desired. The out-of-sight sensor detects moving metal objects in a nominal range of eight feet on either side of the sensor — and sends a signal to the master control unit, which sounds the chime.

    Preventing theft - The sensor, when placed alongside a stationary metal object (such as campers, farm tractors, RVs, boats, or gasoline tanks) will detect any movement of that object and sound an alarm, aiding the prevention of theft and vandalism.

    Drive-Up Window Applications - Restaurants, banks, pharmacies and other businesses that utilize drive-up windows can use the Drive-Alert unit to signal a customer’s arrival.

    Enhancing safety - Industrial safety is improved by using the Drive-Alert unit at busy or blind intersections, helping to prevent accidents by signaling the movement of vehicular traffic in these areas. The DA-503 Drive Alert is mounted easily in any enclosed area with 120 VAC access. The sensor is buried 6" deep, parallel to the drive or area being protected. By a simple adjustment at the control box, the sensitivity of the sensor’s operating range can be changed.

    VISONIC BR-1 Mounting Bracket For Pirs - VISONIC BR1


    The BR-1 is a universal wall mount bracket that accommodate most of the PIR detectors produced by Visonic Ltd.

    Wheelock ASRS-A-DC - HORN STROBE INDUSTRIAL 24VDC AMBER LENS Wheelock MIDS-B-DC - AUDIBLE HORN Audible strobe, 9 â“ 60VDC, Blue lens
    Description:
    The Series ASR Audible and Audible Strobe products provide
    a range of warning alarms and strobes designed to cope with
    harsh environments providing weatherproof protection. Design
    features are incorporated to ensure safer and easier installation,
    while providing flexibility with fewer product variants.

    Features:
    up to 120dB(A) Output
    Three stage alarm (2 programmable - 1 standard)
    More light where required with asymmetric lens
    Easy access for installation with shallow base format
    42 Tones
    Weatherproof - Indoor/Outdoor

    Current:
    ASR-DC 450MA/MAX
    ASR-AC 115VAC - 130 MA
    230VAC - 65 MA
    ASRS-DC Max 700 MA

    Nominal Voltage: 18 - 30VDC, 115/230VAC
    Current Consumption
    (tone dependant): Between
    Sound Output
    (tone dependant): Between 105 - 102dB
    Alarm Tones: 42
    IP Rating: IP66
    Lens Colour: Red / Amber / Blue
    Flash Rate: 1 Hz (60 per min)
    Color: Off White
    Strobe Type: U-Tube
    Operating Tempature: -25oC to 70oC
    Monitoring Mode: Polarizing Diode (DC models only)
    Volume Control: 0 to -10dB
    Description:
    The Series MID Audible and Audible Strobe is a versatile and
    rugged alarm designed for industrial environments or areas
    where there is a requirement for a physically robust and wellprotected
    unit.

    Features:
    110dB(A) Output
    Weatherproof
    Simple First & Second Installation
    Fully Integrated High Efficiency Strobe
    32 Alarm Tones
    Two Stage Alarm (1 programmable, 1 standard)

    Nominal Voltage: 9 to 60VDC, 115/230VAC Indoor/Outdoor
    Current Consumption: Max. 90mA @ 24VDC
    Sound Output
    (tone dependant): 105 - 110dB(A)
    Alarm Tones: 32
    IP Rating: IP66
    Color: Off White
    Flash Rate: 1 Hz (60/min)
    Strobe Type: Xenon


       
     
    Wireless Products Accessories for Burglar Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please