You are here: Home > Burglar Alarms / Intrusion >

Wireless Products for Burglar Alarm Systems

>

Wireless Smoke Detectors for Burglar Alarm Systems

We found 10 results matching your criteria.
Alarm systems often incorporate wireless smoke detectors to provide a higher level of security coverage. Security Store USA’s line of wireless smoke detectors is the last word for installation, safety, and convenient operation. In addition to wireless communication of emergency alarm system signals, wireless smoke detectors also transmit status, tamper, and maintenance information to the control system. Additional capabilities include microchip-based air analysis, long battery life, integral heat sensor, and extensive mounting options.
Sort By:
Page of 1
Caddx TX-6010-01-1 - Wireless Smoke Photoelectric Alarm with Crystal Transmitter (replaces 60-848-02-95 and NX-491NT) GE 60506319.5 System Sensor Wireless Smoke Sensor® 2001Rfh: Built-In Sounder and Low battery Annunciator. UL Residential Listing. Batteries Included
The TX Series supervised wireless smoke alarms are self-diagnostic and include an integrated Learn Mode 319.5MHz crystal transmitter. Features of the TX Series wireless smoke alarms include photoelectric technology, integral Temp 3 sounder, automatic drift compensation, replaceable optical chamber, low battery annunciation, status/sensitivity reading LED, mounting base tamper, and integrated fixed temp./ROR heat sensor. The TX Series wireless smoke alarms can be used with selected GE Security control panels, such as Simon and Concord and make the perfect fire/life safety add-on to a monitored security system.

Standard Features


  • Self-Diagnostics reduces the chance of a nuisance alarm
  • Replaceable optical chamber make cleaning a snap
  • 2 3V Lithium batteries provide long battery life
  • Automatic drift compensation reduces the chance of a nuisance alarm
  • Learn mode feature reduces installation time
  • Alarm signal sent to central station on test
  • Low battery pre-alert sent to central station before sounder chirps
  • Mounting base tamper sends trouble condition if smoke alarm is removed reducing liability

The NX 490 smoke detector is designed to operate with wireless NetworX series control panels.

  • Produces an alarm and sends an alarm signal to the control panel when smoke is detected. Use in bedrooms, hallways, stariwells, etc.
  • Photoelectric smoke dectector
  • Built-in siren
  • Built-in low battery annunciator
  • Ademco / Honeywell Wireless Life Safety Combo - 5806W3 and 5800CO Honeywell / Ademco 5804/LSTKT 5808LST Wireless Smoke/Heat Detector & 5804 Four Button Wireless Key

    Honeywell’s 5806W3 is a 3V battery operated, photoelectronic smoke detector with a built-in wireless transmitter. It facilitates fire verification for false alarm reduction requirements by ANSI/SIA CP-01standards and is intended for use with any of Honeywell’s 5800 Series wireless receiver/transceivers for residential installations. The 5881ENHC or 5883H receivers are required for commercial installations.

    The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals) and battery condition messages to the system’s receiver. The maintenance signal fully complies with the sensitivity test requirement specified in NFPA 72, 7-2.2 and is UL approved.

    The 5806W3 incorporates a state-of-the-art optical sensing chamber and advanced microprocessor. It also helps eliminate nuisance alarms and virtually eliminates non-billable service calls and fines resulting from false alarms. The microprocessor allows the detector to automatically maintain proper operation at factory calibrated detection levels, even when sensitivity is altered due to the presence of contaminants settling into the unit’s smoke chamber. A removable detector cover and chamber top allows the technician to quickly and easily clean the detector chamber without disassembling the detector head.

    Since there are no holes to drill or wires to run, installers can preserve the beauty of the protected premise while protecting it. The 5806W3 is an ideal smoke detector for difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist.

    Features

    • Smoothing Algorithms
      Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke.
    • Smart Check
      A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm.
    • Drift Compensation
      Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity.
    • Removable Detector Cover and Chamber Top
      Provides the technician the ability to quickly and easily clean the detector chamber without disassembling the detector head.
    • Approved UL Listings for Residential and Commercial Applications
      Both residential and commercial installation requirements are met.
    • Additional LED Status Indicators
      Identifying between alarm or trouble conditions is easier with green and red LED status indicators. The green LED denotes a normal condition while the red LED indicates an abnormal condition.
    • Easy-to-install Mounting Base
      The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports to accommodate drywall anchors for easy surface mounting.
    • Improved Robust RF Field Strength
      The distance between the detector and receiver has been significantly increased.

    Additional Features:

    • Utilizes one long-life 3V lithium battery
    • Microcontroller runs on an 4.0 MHz clock
    • Horn operates at 3.3 KHz with sound pressure level of 85dBA at 10 feet
    • Built-in wireless transmitter, temporal code 3 sounder

    Specifications:

    • Dimensions : Diameter: 5.3"*, Height: 2.30"
    • Weight : 8.5 oz. (without batteries)
    • Operating Temperature : 32:100°F (0:37.8°C)
    • Humidity Range : 0% to 95% RH, non-condensing
    • Air Velocity : 1,000 ft./min. max.
    • Operating Voltage : 2.5:3.6VDC
    • Standby Current : 8.5 ?A avg.
    • Alarm Current : 35 mA max.
    • Power Source : One 3V CR123A lithium Battery**
    • Audible Output : 85dB min. @ 10 ft.
    • Agency Listings : UL268 : Commercial and Residential


    * With adapter bracket (4.9" without mounting base)
    **Replacement batteries include Duracell DL123A, Sanyo CR123A, Panasonic CR123A, or ADEMCO 466

    The 5800CO is a 3V battery powered wireless carbon monoxide (CO) detector intended for use with Honeywell alarm systems that support 5800 Series wireless devices. It provides early warning when its electrochemical sensing technology measures carbon monoxide levels in the air.

    The 5800CO is specifically designed for system operation and is fully listed to UL 2075 as a system supervised detector.* It contains a piezoelectric horn which generates the ANSI S3.41 temporal 4 pattern in an alarm condition.

    The detector consists of an electrochemical carbon monoxide sensor assembly coupled with a wireless transmitter. The transmitter can send alarm, trouble, end-of-life, tamper and low battery condition messages to the alarm panel.

    Since there are no holes to drill or wires to run, you can preserve the beauty of the home or building while protecting its occupants from harmful carbon monoxide gas. The 5800CO is an ideal carbon monoxide detector for difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist.

    What is Carbon Monoxide and How Can it Harm Consumers? Carbon monoxide (CO) is an odorless, colorless, tasteless and highly toxic gas that is produced when fuels such as wood, gasoline, charcoal and oil are burned with insufficient air. The majority of residential and commercial fatalities caused from these fuels come from heating systems, engine powered tools and charcoal grills. Carbon monoxide is harmful when inhaled because it displaces oxygen in the blood and deprives the heart, brain and other vital organs of oxygen. Large amounts of CO can overcome a person in minutes without warning—causing them to lose consciousness and suffocate.

    The 5800CO is designed to warn the end-user well before the CO reaches a fatal level. The detector’s CO sensitivity is evaluated to UL 2034.

    ADEMCOs powerful 5808LST is a combination wireless photoelectric smoke and heat detector that trips when temperatures reach 135 F. Ideal for difficult to wire locations, situations where room aesthetics are critical, or where hazardous materials exist, the 5808LST provides the ultimate in installation flexibility.

    Remarkably cost-effective, the attractive, low profile unit blends easily with any dcor and provides benefits rarely found in smoke detectors in this price range. Smart Check remote maintenance reporting automatically alerts the central station when it is in need of service, and built-in drift compensation continuously corrects sensitivity variances caused by dust. The 5808LST is UL 268 listed for use in both commercial and residential applications.

    5804 Four Button Wireless Key

    Similar in size to a remote car alarm key, the 5804 wireless key offers many of the features of a traditional keypad with convenient fingertip control.

    • Four completely programmable buttons
    • User replaceable, long-life lithium batteries
    • Recessed keys
    • Remote operation of lights and appliances
    • One-button operation (no codes to remember)
    Honeywell's 5193SD Addressable Photoelectric Smoke Detector Honeywell's 5193SDT Addressable Photoelectric Smoke Detector
    Honeywell's 5193SD / 5193SDT Addressable Photoelectric Smoke Detector is designed to provide open area protection and to be used with compatible UL-listed Honeywell control panels that support V-Plex technology. The detector incorporates a state-of-the-art optical sensing chamber and an advanced microprocessor. Built-in Drift Compensation algorithms automatically maintain proper operation at factory calibrated detection levels, even when sensitivity is altered due to the presence of contaminates settling into the unit's chamber. The 5193SDT also features a restorable, built-in, fixed temperature (135° F/57.2° C) thermal detector. Honeywell's 5193SDT Addressable Photoelectric Smoke Detector is designed to provide open area protection and to be used with compatible UL-listed Honeywell control panels that support V-Plex technology. The detector incorporates a state-of-the-art optical sensing chamber and an advanced microprocessor. Built-in Drift Compensation algorithms automatically maintain proper operation at factory calibrated detection levels, even when sensitivity is altered due to the presence of contaminates settling into the unit's chamber. The 5193SDT also features a restorable, built-in, fixed temperature (135° F/57.2° C) thermal detector.
    Ademco / Honeywell 5806W3 - Wireless Smoke Detector KIDDE 3K-0919-9999 9 Volt Battery Operated Wireless Smoke Detector - 3K-09199999

    Honeywell’s 5806W3 is a 3V battery operated, photoelectronic smoke detector with a built-in wireless transmitter. It facilitates fire verification for false alarm reduction requirements by ANSI/SIA CP-01standards and is intended for use with any of Honeywell’s 5800 Series wireless receiver/transceivers for residential installations. The 5881ENHC or 5883H receivers are required for commercial installations.

    The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals) and battery condition messages to the system’s receiver. The maintenance signal fully complies with the sensitivity test requirement specified in NFPA 72, 7-2.2 and is UL approved.

    The 5806W3 incorporates a state-of-the-art optical sensing chamber and advanced microprocessor. It also helps eliminate nuisance alarms and virtually eliminates non-billable service calls and fines resulting from false alarms. The microprocessor allows the detector to automatically maintain proper operation at factory calibrated detection levels, even when sensitivity is altered due to the presence of contaminants settling into the unit’s smoke chamber. A removable detector cover and chamber top allows the technician to quickly and easily clean the detector chamber without disassembling the detector head.

    Since there are no holes to drill or wires to run, installers can preserve the beauty of the protected premise while protecting it. The 5806W3 is an ideal smoke detector for difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist.

    Features

    • Smoothing Algorithms
      Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke.
    • Smart Check
      A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm.
    • Drift Compensation
      Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity.
    • Removable Detector Cover and Chamber Top
      Provides the technician the ability to quickly and easily clean the detector chamber without disassembling the detector head.
    • Approved UL Listings for Residential and Commercial Applications
      Both residential and commercial installation requirements are met.
    • Additional LED Status Indicators
      Identifying between alarm or trouble conditions is easier with green and red LED status indicators. The green LED denotes a normal condition while the red LED indicates an abnormal condition.
    • Easy-to-install Mounting Base
      The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports to accommodate drywall anchors for easy surface mounting.
    • Improved Robust RF Field Strength
      The distance between the detector and receiver has been significantly increased.

    Additional Features:

    • Utilizes one long-life 3V lithium battery
    • Microcontroller runs on an 4.0 MHz clock
    • Horn operates at 3.3 KHz with sound pressure level of 85dBA at 10 feet
    • Built-in wireless transmitter, temporal code 3 sounder

    Specifications:

    • Dimensions : Diameter: 5.3"*, Height: 2.30"
    • Weight : 8.5 oz. (without batteries)
    • Operating Temperature : 32:100°F (0:37.8°C)
    • Humidity Range : 0% to 95% RH, non-condensing
    • Air Velocity : 1,000 ft./min. max.
    • Operating Voltage : 2.5:3.6VDC
    • Standby Current : 8.5 ?A avg.
    • Alarm Current : 35 mA max.
    • Power Source : One 3V CR123A lithium Battery**
    • Audible Output : 85dB min. @ 10 ft.
    • Agency Listings : UL268 : Commercial and Residential


    * With adapter bracket (4.9" without mounting base)
    **Replacement batteries include Duracell DL123A, Sanyo CR123A, Panasonic CR123A, or ADEMCO 466
    3K-0919-9999 9 Volt Battery Operated Wireless Smoke Detector - 3K-09199999
    operates on 110 volts. 9 volt battery is only for backup

    Rokonet RWT30 Nova Wireless Smoke Detector Rokonet RWT30S433 WIRELESS SMOKE DETECTOR, 433MHZ
    Wireless Smoke Detector
    The Wireless Smoke Detector is a ceiling mount photoelectric smoke detector for adding fire warning capability to intruder alarm or access control systems.

  • Frequency of 868MHz or 433MHz
  • Range (Line of Sight) 400m (1300ft)
  • Ceiling mount
  • No radiation emission
  • Restore transmission
  • Test mode
  • Low battery transmission
  • Uses one of 16 million codes without dipswitches
  • Status transmission every 65 minutes
  • Back tamper on T32 model
  • Uses two 2 x 3 volt Lithium batteries (CR123A) for up to 2-year battery life
  • Rokonet RWT30S433 WIRELESS SMOKE DETECTOR, 433MHZ
       
     
    Wireless Smoke Detectors for Burglar Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please