You are here: Home > Home Automation > Z-Wave Technology Products
We found 28 results matching your criteria.
Z-Wave Technology Products = Z-Wave makes any home a “smart home” – quickly, easily and affordably! Z-Wave is a next-generation wireless ecosystem that lets all your home electronics talk with each other
Sort By:
Page of 3
Caddx CA-GSMZWAVAT NetworX Alarm with Zwave AT&T Caddx CA-GSMZWAVTM NetworX Wireless Alarm GSM Module Z-Wave for Tmobile
The NX-592E-GSM Wireless Gateway allows NetworX owners to control and monitor their system status from the Alarm.com website.

Through a wireless, two-way paging network, your customer has limited controls on such features as security, notifications, history, and authentication. The modem for the NX-592E-BO must be purchased separately from Alarm.com.

Utilizing the wireless paging network, NetworX owners may also be notified of system events by e-mail,
pager, or phone.

The wireless module interfaces with the NetworX panel data bus and is powered by the panel or an auxiliary 12
VDC power supply. Status LEDs indicate bus and paging network communications. for an illustration of the main module components, and see Table 1 on page 3 for a description of each component..

The wireless module interfaces with the NetworX panel data bus and is powered by the panel or an auxiliary 12 VDC power supply. Status LEDs indicate bus and GSM network communications.

Specifications:

Compatibility: NetworX panels.
Power requirements: 9.5 to 15 VDC, 12 V nominal, 65 mA (continuous), 1600 mA (instantaneous peak) maximum from panel or auxiliary power supply.
Paging network: One wireless, two-way paging transceiver (ReFLEX 25 for NX-592E-W or ReFLEX 50 for NX-592E-S).
Power/data bus: One three-wire NetworX power/communications data bus.
Indicators: One module/panel communication status LED. Four wireless communication status LEDs.
Operating temperature: 32 to 120F (0 to 49C).
Storage temperature: -30 to 140F (-34 to 60C).
Humidity: 90% relative humidity; non-condensing.
Case color: Belgian gray.
Case materials: High impact, ABS plastic.
Dimensions: 5.25 x 4.125 x 1 inch. (H x W x D).
Installation: Wall mount. 		The NX-592E-GSM-ZWAVE-TM from GE Security is a NetworX Wireless Alarm.com GSM Module, Z-Wave for TMobile Network.

Using the NX-592E-GSM NetworX wireless Alarm.com GSM module, NetworX owners can control and monitor the status of their security system from the Alarm.com website. Control security, notifications, history and authentication through a digital GSM data network. Operation of the NetworX system from the Alarm.com web interface is simple and allows system access any time, from any location. Features from Alarm.com include managing your customer account, viewing system status and history, and arming your system. Use the GSM wireless network to be notified of system events by e-mail, PDA or phone. Web-enabled features depend on selected service packages from Alarm.com and may vary. The wireless module interfaces with the NetworX panel data bus and is powered by the panel. Status LEDs indicate bus and GSM network communications. For added peace of mind, an optional case-tamper detection switch is available. The switch activates an alarm or trouble signal when the module cover is removed. NetworX panels support a maximum of one wireless gateway per system.

Specifications:

NX-592E-GSM:

Compatibility: NetworX NX-4, NX-6, NX-8, NX-8E (Note: Certain older V1 NX-4, NX-6 and NX-8 models may not be fully supported.)

Electrical:

Power supply: 9.5 to 15 VDC, 12 V nominal
Current consumption: 65 mA (continuous), 1600 mA (instantaneous peak) max. from panel or auxiliary power supply
Power/data bus: One three-wire NetworX power/communications data bus

Network: Quad Band GSM/GPRS

Environmental:

Operating temperature: 32 to 120F (0 to 49C)
Storage temperature: -30 to 140F (-34 to 60C)
Relative humidity: 90%, noncondensing

Physical:

Onboard status indicators:

one module/panel communication status LED;
one module power LED, one automation LED, three wireless communications status LEDs, and four GSM status LEDs

Dimensions (HxWxD): 5.25 x 4.125 x 1.0 in. (133 x 105 x 25 mm)
Construction: High-impact ABS plastic
Color: Belgian gray
Installation: Wall mount
Regulatory: FCC Part 15
Caddx CA-ISZWAM1 Z-Wave Plug-In Fluorescent Light and Appliance Module Caddx CA-ISZWDS1 Z-Wave In-Wall Dimmer
The GE IS-ZW-AM-1 Z-Wave Plug-In Fluorescent Light and Appliance Module is part of a broad array of Z-Wave Lighting and Appliance components which provide convenience and flexibility to homeowners. Compatible with the Simon XT and Concord 4 (v4.5 and higher) home security systems, Z-Wave modules easily unify home electronics into an integrated wireless network without complicated programming.

Z-Wave's modular design means devices can be easily added to a home network and can communicate wirelessly with other Z-Wave modules and remote controls. The Auto-Sensing feature automatically turns on lights and blue LED's allow you to quickly identify system status. Z-Wave also allows central control of various devices and the ability to command lighting and appliances from a web-based PC or cell phone.

Specifications:

Power: 120VAC, 60Hz
Signal (Frequency): 908.42 MHz
Maximum Load for the Z-Wave Controlled Outlet: 600W Incandescent, 1/2 HP Motor, or 1800W Resistive
Maximum Load for Both Outlets: 15 Amps 1800W Resistive
Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
Operating Temp. Range: 32-104 F (0-40 C) For indoor use only 		The GE IS-ZW-DS-1 Z-Wave In-Wall Dimmer is part of a broad array of Z-Wave Lighting and Appliance components which provide convenience and flexibility to homeowners. Compatible with the Simon XT and Concord 4 (v4.5 and higher) home security systems, Z-Wave modules easily unify home electronics into an integrated wireless network without complicated programming.

Z-Wave's modular design means devices can be easily added to a home network and can communicate wirelessly with other Z-Wave modules and remote controls. The Auto-Sensing feature automatically turns on lights and blue LED's allow you to quickly identify system status. Z-Wave also allows central control of various devices and the ability to command lighting and appliances from a web-based PC or cell phone.

Specifications:

Power: 120VAC, 60Hz
Signal (Frequency): 908.42 MHz
Minimum Load: 40W, incandescent lamps only
Maximum Load: 500W, incandescent lamps only
Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
Operating Temp. Range: 32-104 F (0-40 C) For indoor use only
Caddx CA-ISZWLM1 Z-Wave Plug-In Lamp Dimmer Module Caddx CA-ISZWOM1 Outdoor Module Z-Wave Interactive Services
The GE IS-ZW-LM-1 Z-Wave Plug-In Lamp Dimmer Module is part of a broad array of Z-Wave Lighting and Appliance components which provide convenience and flexibility to homeowners. Compatible with the Simon XT and Concord 4 (v4.5 and higher) home security systems, Z-Wave modules easily unify home electronics into an integrated wireless network without complicated programming.

Z-Wave's modular design means devices can be easily added to a home network and can communicate wirelessly with other Z-Wave modules and remote controls. The Auto-Sensing feature automatically turns on lights and blue LED's allow you to quickly identify system status. Z-Wave also allows central control of various devices and the ability to command lighting and appliances from a web-based PC or cell phone.

Specifications:

Power: 120VAC, 60Hz
Signal (Frequency): 908.42 MHz
Maximum Load for the Z-Wave Controlled Outlet: 300W Incandescent, Z-Wave controlled outlet is fused @ 5A. This fuse is not user serviceable
Maximum Load for Pass-through Outlet: 1500W
Maximum Load for both Outlets: 15 Amps 1800W Resistive
Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
Operating Temp.: 32-104F (0-40C) For indoor use only 		The GE IS-ZW-OM-1 Z-Wave Outdoor Module is part of a broad array of Z-Wave Lighting and Appliance components which provide convenience and flexibility to homeowners. Compatible with the Simon XT and Concord 4 (v4.5 and higher) home security systems, Z-Wave modules easily unify home electronics into an integrated wireless network without complicated programming.

Z-Wave's modular design means devices can be easily added to a home network and can communicate wirelessly with other Z-Wave modules and remote controls. The Auto-Sensing feature automatically turns on lights and blue LED's allow you to quickly identify system status. Z-Wave also allows central control of various devices and the ability to command lighting and appliances from a web-based PC or cell phone.

Specifications:

Power: 120VAC, 60Hz
Signal (Frequency): 908.42 MHz
Maximum Load for the Z-Wave Controlled Outlet: 600W Incandescent, 1/2 HP Motor, or 15A 1800W Resistive
Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
Operating Temperature: Range 14-140 F (-10-60 C) For outdoor use in dry, damp or wet locations.
Caddx CA-ISZWRC1 Remote Control Z-Wave Interactive Services Caddx CA-ISZWWR1 Z-Wave Wall Receptacle
The GE IS-ZW-RC-1 Z-Wave LCD Remote Control is part of a broad array of Z-Wave Lighting and Appliance components which provide convenience and flexibility to homeowners. Compatible with the Simon XT and Concord 4 (v4.5 and higher) home security systems, Z-Wave modules easily unify home electronics into an integrated wireless network without complicated programming.

Z-Wave's modular design means devices can be easily added to a home network and can communicate wirelessly with other Z-Wave modules and remote controls. The Auto-Sensing feature automatically turns on lights and blue LED's allow you to quickly identify system status. Z-Wave also allows central control of various devices and the ability to command lighting and appliances from a web-based PC or cell phone.

Specifications:

Signal (Frequency) 908.42 MHz
Battery Three AAA Alkaline, 1.5V, not included 		The GE IS-ZW-WR-1 Z-Wave Wall Receptacle is part of a broad array of Z-Wave Lighting and Appliance components which provide convenience and flexibility to homeowners. Compatible with the Simon XT and Concord 4 (v4.5 and higher) home security systems, Z-Wave modules easily unify home electronics into an integrated wireless network without complicated programming.

Z-Wave's modular design means devices can be easily added to a home network and can communicate wirelessly with other Z-Wave modules and remote controls. The Auto-Sensing feature automatically turns on lights and blue LED's allow you to quickly identify system status. Z-Wave also allows central control of various devices and the ability to command lighting and appliances from a web-based PC or cell phone.

Specifications:

Power: 120VAC, 60Hz
Signal (Frequency): 908.42 MHz
Maximum Load for the Z-Wave Controlled Outlet: 600W Incandescent, 1/2 HP Motor or 15A 1800W Resistive
Maximum Load for Both Outlets: 1800W Resistive
Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
Operating Temp. Range: 32-104F (0-40C) For indoor use only
Caddx CA-ISZWWS1 Z-Wave In-Wall On-Off Switch Caddx CA-ISZWTSTA3 Thermostat Z-Wave Interactive Services
The GE IS-ZW-WS-1 Z-Wave In-Wall On-Off Switch is part of a broad array of Z-Wave Lighting and Appliance components which provide convenience and flexibility to homeowners. Compatible with the Simon XT and Concord 4 (v4.5 and higher) home security systems, Z-Wave modules easily unify home electronics into an integrated wireless network without complicated programming.

Z-Wave's modular design means devices can be easily added to a home network and can communicate wirelessly with other Z-Wave modules and remote controls. The Auto-Sensing feature automatically turns on lights and blue LED's allow you to quickly identify system status. Z-Wave also allows central control of various devices and the ability to command lighting and appliances from a web-based PC or cell phone.

Specifications:

Power: 120VAC, 60Hz
Signal (Frequency): 908.42 MHz
Minimum Load: 40W Incandescent
Maximum Load: 600W Incandescent, 1/2HP Motor, 1800W Resistive
Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
Operating Temp.: 32-104 F (0-40 C) For indoor use only. 		The GE IS-ZW-TSTAT-100 Z-Wave Wireless Thermostat is a digital thermostat that you can control wirelessly. The IS-ZW-TSTAT-100 operates as a simple thermostat with buttons to set target temperatures for heat and cool modes.

The thermostat is compatible with standard 24 VAC heating and cooling systems, up to single-stage heat, one-stage cool. The thermostat is designed for indoor use only.

The wireless thermostat cannot be used with a line-voltage system. Line voltage or high voltage thermostat systems run off your home's 120 V or 240 VAC power and are not particularly common as they are used primarily for electric resistance heating systems. The wires on a line-voltage system will be thicker electrical wires like those used for a light switch or outlet. Low voltage wiring looks like telephone or speaker wire. If you are not certain of the type of system, call an electrician or HVAC service.
Elk ELK-M1XZW - M1 Z-Wave Interface ELK-M1XSLZW M1 to Leviton Z-Wave Interface
The ELK-M1XZW is a radio transceiver interface designed to allow an M1 Controller to interface with Z-Wave enabled devices. Z-Wave technology is a wireless bi-directional communications network consisting of devices such as: Plug-in Dimmer Modules, Wall Mount Switches and Dimmers, Plug-in Appliance Modules, Motion/Occupancy Sensors, and HVAC Thermostats. The M1XZW interface functions as a Z-Wave Secondary Controller OR as a Z-Wave Static Update Controller (SUC) for holding the Z-Wave system setup programming. The interface connects to the M1 RS-485 data bus and is enrolled and identified as a Type 5 Expander. As such, it may be remotely located anywhere along the RS-485 data bus within the maximum stated distance limits. The housing is designed for wall mounting and includes mounting screws and anchors. Z-Wave is a trademark of Zensys, Inc.

M1 Controllers can be programmed to control Z-Wave network devices based on any number of events using the powerful rules engine. These events include, but are not limited to:
-Time
-Alarm System Arm Status
-Status of Alarm System Sensors such as door contact, motion sensors, etc.
-Task Activation
-Sunrise /Sunset Light/Dark
And More...

M1 Controllers can also control Z-wave network devices remotely. The M1Gold Control features a built-in, telephone remote control. With the M1XEP Ethernet Interface, both the M1Gold and M1EZ8 can control Z-Wave enabled devices over the internet, without the need for a dedicated, "24/7" server.

FEATURES: 

  • Flash Memory for Firmware Updating

  • Connects to the M1 Data Bus - RS-485

  • LED Indicators for Status and Programming

  • Push Button "Copy" Program Switch

  • For Indoor Use Only

 

SPECIFICATIONS:

  • Signal (Frequency): 908.42 MHz

  • Range: Up to 100 feet (line of sight) to closest Z-Wave enabled product

  • Operating Voltage: 12 Volts D.C.

  • Operating Temperature Range: 32-105 degrees F 
    (0 - 40 degrees C)

  • Current Draw: approx. 60 mA

  • Housing Dimensions: 4.25" x 6.375" x 2.125"

  • Circuit Board Dimensions: 2.25" x 3.95"

 		The M1XSLZW is a specialized Elk-M1 serial expander for connecting an M1 Control to Z-Wave enabled devices through a Leviton VRC0P+3 Z-Wave Serial Interface. Z-Wave is a wireless, low power, "mesh" network technology widely used for automating devices such as: Lights, Thermostats, Electronic Locks, etc. Z-Wave empowers devices to be remotely controlled from across the room or across the world with benefits such as energy savings, convenience, and comfort.

The VRC0P+3 is known as a Z-Wave Secondary Controller. It must be included as a permanent member of the Z-Wave network as its job is to maintain contact with all Z-Wave devices. It communicates via RS232 to the M1XSLZW which translates the protocol into the M1 control. This allows commands to be sent and received on the Z-Wave network.

Functionally the M1XSLZW is a serial expander (RS485 to RS232) and shares the same TYPE 5 databus ID as M1XSP serial expanders. A maximum of seven (7) TYPE 5 serial expanders may be connected to an M1.

A key benefit of combining the M1XSLZW and VRC0P+3 is the ability to interface with new generation Z-Wave devices such as the electronic deadbolts and locksets from Kwikset, Yale, and Schlage. Locks require a special Security Encrypted (SE) protocol and a process called "Beaming". Both the M1XSLZW and the VRC0P+3 support these new requirements.

In general, any Z-Wave device that is compatible with the Leviton VRC0P+3 should also be compatible with the M1. However some devices may have limited functionality due to design or feature differences.
   
 
Z-Wave Technology Products