212-537-6540   212-202-3763

Bosch PC1A Weather Enclosure

Bosch PC1A Weather Enclosure
Custom Order

Custom orders usually ship in 1-2 weeks.


0 [0]
Preffered Supplier
The DS484Q and DS486Q Detectors have separate transmitters and receivers. The transmitter sends an invisible infrared beam to the receiver. If the beam is broken, the receiver signals an alarm. Multiple channel operation provides increased system flexibility. And-Or Mode Selection: You can configure the detectors to cause an alarm when all four beams are blocked, or when either the upper two beams or lower two beams are blocked. This configuration detects smaller objects and eliminates the possibility of someone crawling through the beam. Specifications: Photobeam: Selectable Beams: Two groups by four channels Maximum Outdoor Coverage DS484Q: 120 m (400 ft) Maximum Outdoor Coverage DS486Q: 200 m (660 ft) Response Time: Selectable response time of 35 ms to 700 ms Beam Interrupt Time: Adjustable from 50 ms to 500 ms Enclosure Design: Material: Polycarbonate Dimensions: 398 mm x 103 mm x 99 mm (15.67 in. x 4.06 in. x 3.90 in.) Receiver Weight: 1.2 kg (2.64 lb) Transmitter Weight: 1.2 kg (2.64 lb) Environmental Considerations: Operating Temperature: -25° C to + 55° C (-13°F to + 130° F) IP Rating: IP 54 (protection against dust; protection against splashing water) Mounting Considerations: Location: Surface or pole mount Pattern Pointability: ±90° horizontal, ±10° vertical Power Requirements: Voltage: 10.5 VDC to 28 VDC non-polarized Receiver Current Draw: 80 mA standby, 50 mA alarm DS484Q Transmitter Current Draw: 35 mA DS486Q Transmitter Current Draw: 55 mA Backup Power Requirements: 4 hours (120 mAh) minimum required for UL Certificated Installations Tamper Output: Normally-closed contacts rated at 0.1 A at 30 VDC Alarm Output: Form C 0.2 A at 30 VDC, output period: 3 sec EDC Output: Normally-closed 0.2 A at 30 VDC, output period: 3 sec Tamper Output: Normally-closed 0.1 A at 30 VDC, output period: while cover is removed Environmental Discrimination Circuit Output: Normally-closed contacts rated at 0.2 A at 30 VDC