You are here: Home > Shop Brands > System Sensor > Audible / Visible Notification > Accessories
We found 7 results matching your criteria.
Sort By:
Page of 1
Camden CM-11907212 (CM-1190-7212) Flush Mount Key Switch, DPDT Maintained with Red & Green 12V LEDs Mounted on Faceplate Camden CM-20207212 (CM-2020-7212) Narrow Key Switch, Momentary, N/O & N/C with Red and Green 12V LEDs Mounted on Faceplate

CM-1190-7212 Flush Mount Key Switch, DPDT Maintained with Red & Green 12V LEDs Mounted on Faceplate

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments. The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

Features:
  • Single gang and narrow style models
  • Accepts standard mortise cylinders, 1" 1 1⁄4 "
  • Heavy duty 1⁄4 " thick aluminum plate
  • 1 piece die cast construction
  • Locators prevent cylinder from spinning
  • No set screws required
  • Vandal resistant
  • Cylinder sits flush to faceplate
  • Tamper proof screws provided
  • Indoor or outdoor applications
  • UL/CSA approved switches
  • 1 OR 2 switches may be installed
  • Left and/or right operation
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Heat shrink protective sleeve over contacts
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes engraving available
  • Optional led indicators
  • Fast & easy to install
  • Optional 1-60 second DPST pneumatic time delay

CM-2020-7212 Narrow Key Switch, Momentary, N/O & N/C with Red and Green 12V LEDs Mounted on Faceplate

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 11⁄8 ", or 11⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (23⁄4 ") width, CM-2000 is only 13⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.
  • Camden CM-20307212 (CM-2030-7212) Narrow Key Switch, SPDT Maintained with Red and Green 12V LEDs Mounted on Faceplate Camden CM-20307224 (CM-2030-7224) Narrow Key Switch, SPDT Maintained with Red and Green 24V LEDs Mounted on Faceplate

    CM-2030-7212 Narrow Key Switch, SPDT Maintained with Red and Green 12V LEDs Mounted on Faceplate

    CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

    CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

    CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

    CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.
  • CM-2030-7224 Narrow Key Switch, SPDT Maintained with Red and Green 24V LEDs Mounted on Faceplate

    CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

    CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

    CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

    CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.
  • Camden CM-20607224 (CM-2060-7224) Narrow Key Switch, (2) SPDT Maintained with Red and Green 24V LEDs Mounted on Faceplate Camden CM-20907212 (CM-2090-7212) Narrow Key Switch, DPDT Maintained with Red and Green 12V LEDs Mounted on Faceplate

    CM-2060-7224 Narrow Key Switch, (2) SPDT Maintained with Red and Green 24V LEDs Mounted on Faceplate

    CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

    CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

    CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

    CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.
  • CM-2090-7212 Narrow Key Switch, DPDT Maintained with Red and Green 12V LEDs Mounted on Faceplate

    CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

    CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

    CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

    CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

  • Indoor or outdoor flush applications
  • Mullion style - only 1 3/4" wide
  • Perfect for aluminum door frames
  • Accepts standard mortise cylinders - 1" to 1 1/4"
  • Heavy duty 1/4" thick aluminum plate
  • 1 piece die cast construction
  • Vandal resistant
  • Tamper proof screws provided
  • Heavy duty rubber gasket provided
  • UL/CSA approved switches
  • 1 or 2 switches may be installed
  • Wide range of switch configurations
  • Color coded 18 AWG soldered leads
  • Casted centre rib protects switches from damage
  • Brushed aluminum finish
  • Custom color finishes & engraving available
  • Optional LED indicators
  • Optional 1 - 60 second pneumatic time delay.

  • Camden CM-32207224 (CM-3220-7224) Double Gang one Cylinder Key Switch, SPDT Momemtary with Red & Green 24V LEDs Mounted on Faceplate

    CM-3220-7224 Double Gang one Cylinder Key Switch, SPDT Momemtary with Red & Green 24V LEDs Mounted on Faceplate

    CAMDEN DOOR CONTROLS, CM-3200/3500 Series flush mount switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. The assembly will accept one or two cylinders with up to four switches.

    CM-3200/3500 series are double gang width, with heavy duty stainless steel faceplates. Also included are brass cylinder lock rings, 4 socket/slotted screws, and 4 tamperproof screws. (The mortise cylinder is not included, but is available from Camden Door Controls.) The design and construction makes it ideal for all weather environments. The assembly is tamper and vandal resistant.

    CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

    CM-3200/3500 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for automatic doors, shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

    All CM-3200/3500 Series Key Switches are supplied with a stainless steel double gang faceplate, cylinder lock ring, 4 socket/slotted screws, and 4 tamperproof screws. (The mortise cylinder is available separately from CAMDEN DOOR CONTROLS.)

    Features:
    • Heavy duty double gang stainless steel faceplate
    • Indoor and outdoor flush applications
    • Accepts one standard mortise cylinder 1"- 1 1/4"sizes
    • Locators prevent cylinders from spinning
    • Vandal resistant
    • Tamper proof screws provided (no set screws are required)
    • UL/CSA approved switches
    • Custom color finishes and engraving available
    • Optional LED indicators
    • Heat shrink protective sleeve over contacts
    • One or two switches, with multiple switch configurations
       
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please