You are here: Home > Shop Brands > ESL Electro Signal Lab > Smoke Detectors > Projected Beam Smoke Detectors
We found 5 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Projected Beam Smoke Detectors

Sort By:
Page of 1
GE ESL 770-METER - Led Alignment Meter On-Q / Legrand 364681-01 HMS Hometouch Touch Screen Console - DISCONTINUED REPLACED BY HA1003WH

GE Security offers a LED alignment meter

A colorful touch screen interface for HMS family controllers that facilitates graphical control of security, HVAC, lighting and other home control functions via easy-to-recognize icons. 5.9"W x 4.6"H.

  • Color touch screen display allows easy navigation of system controls

  • Provides graphical control of security, lighting, and HVAC systems
  • On-Q / Legrand HA1003WH  HMS 5.7" Home Touch Screen Console - REPLACES 364681-01 GE ESL 771-KIT 24V Low Profile Projected Beam Smoke Detector; Transmitter, Receiver, Control
    On-Q/Legrand HA1003WH HMS 5.7" Home Touch Screen Console Standard Features
  • Low-profile blends in with any environment
  • Selectable sensitivity reduces installation costs
  • Drift compensation reduces false alarms
  • Adjustable mounting brackets and test filter included for fast, easy installation
  • Detects smoke within a 33-330 foot range, reducing installation costs

    The ESL 770 series projected beam smoke detector is intended for industrial and commercial applications. It consists of a optical transmitter that projects a pulsing infrared light beam to a receiver unit. The beam is then continuously analyzed for smoke by the 770 series control panel located at ground level.The control panel connects to a UL Listed FACP. The beam covers an area up to 330 feet by 50 feet.

    The 770 series smoke detector allows the installation of just one smoke detector in applications where two or more spot sensors would normally be required, such as a hallway.

    When smoke is present in the beam path for a period of 8 to 10 seconds, a fire relay is activated. The smoke sensitivity level can be selected to suit different environmental needs. Settings of 25%, 35% and 50% are available.

    The 770 series smoke detector automatically resets once a trouble condition is no longer present and builtin drift compensation provides advanced immunity to false alarms.

  • HAI 28A00-1 Surface Speaker/Microphone Module
    The Model 28A00-1 is a speaker and microphone assembly mounted in a surface mount enclosure that allows two-way communication with a central station after an alarm, paging and listening from an on-premises or remote phone, annunciation of alarm and zone by voice, and voice messaging. It may be used outdoors in weather protected areas. Do not mount speakers, microphones, 28A00 modules, or 33A00-4 consoles near any device that may produce noise (fans, air conditioning units, audio speakers, etc.). Microphones should be connected with 24 AWG or larger, shielded twisted pair wire. Wire length should not exceed 100 feet. Connect the cable shields and negative wires together at the Model 10A11-1, Rev B terminal block only. Do not connect the shield on the microphone end. Additional microphones can be connected to each input in parallel. Speakers should be connected with 18 AWG or larger, twisted pair wire. For wire runs that exceed 50 feet, use 16 AWG wire or larger. Wire length should not exceed 100 feet.


    Speaker Type: Polypropylene Weather Resistant
    Voice Coil: 8 Ohms
    Power Rating: 15 Watts
    Microphone: Electret Condenser, Omni-Directional
    Housing and Enclosure Material: UL-94 Flame Retardant Plastic
    Color: Decorator White
    Dimensions: 5 3/16" H x 5 3/16" W x 2 5/8 D
    Hardware: 14 Mounting Screws and 8 Wall Anchors
    Enclosure Knockouts Knockouts for wire and plastic duct

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please