You are here: Home > Shop Brands > Honeywell Power Products > Access Control Power Supplies
We found 29 results matching your criteria.
The access control power supplies/chargers will convert 115VAC/60Hz into a power limited field-selectable continuous power output.
Sort By:
Page of 3
Honeywell HP300ULM 12/24VDC 2.5A, PS W/ HPMOM5 Honeywell HP300ULM 2.5A 12/24VDC 5 Out UL Listed PS w/Fire Alarm Interface & Encl
12/24VDC 2.5A, PS W/ HPMOM5
The HP300ULM switching power supply/charger provides 12 VDC/24VDC @ 2.5A of continuous supply current, and includes the HPMOM5 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and six individually protected PTC outputs rated 2.5 amps each.. This multi-function power supply has a wide range of applications for access control and fire systems that require additional power. AC fail, low battery and battery presence monitoring included. Enclosure accommodates up to two (2) 12AH batteries.

Specifications
  • Input 115VAC 60Hz
  • Switch selectable 12 VDC/24VDC.
  • 2.5 A continuous supply current at 12 VDC and 24VDC.
  • Includes the HPMOM5 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and six dividually protected PTC outputs rated 2.5 amps each..
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead acid or gel type batteries.
  • UL Listed to UL294 for Access Control Systems, UL1481 for Fire
  • System Power Supplies and UL2044 for CCTV Systems
  • Maximum charge current 400 mA.
  • Input and output transient protection.
  • Automatic switchover to standby battery when AC fails.
  • Transformer has built-in thermal protection.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Hinged cover and vented enclosure with five convenient knockouts.
  • Battery leads included.
  • Operating temperature range: 4F to +95F (20C to +35C), indoor use only.
  • Cabinet dimensions: 13" (H) x 13.5" (W) x 3.25" (D)
  • Description
    The HP300ULM switching power supply/charger provides 12 VDC/24VDC @ 2.5A of continuous supply current, and includes the HPMOM5 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and six individually protected PTC outputs rated 2.5 amps each.. This multi-function power supply has a wide range of applications for access control and fire systems that require additional power. AC fail, low battery and battery presence monitoring included. Enclosure accommodates up to two (2) 12AH batteries.

    Specifications
  • Input 115VAC 60Hz
  • Switch selectable 12 VDC/24VDC.
  • 2.5 A continuous supply current at 12 VDC and 24VDC.
  • Includes the HPMOM5 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and six dividually protected PTC outputs rated 2.5 amps each..
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead acid or gel type batteries.
  • UL Listed to UL294 for Access Control Systems, UL1481 for Fire
  • System Power Supplies and UL2044 for CCTV Systems
  • Maximum charge current 400 mA.
  • Input and output transient protection.
  • Automatic switchover to standby battery when AC fails.
  • Transformer has built-in thermal protection.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Hinged cover and vented enclosure with five convenient knockouts.
  • Battery leads included.
  • Operating temperature range: 4F to +95F (20C to +35C), indoor use only.
  • Cabinet dimensions: 13" (H) x 13.5" (W) x 3.25" (D)
  • Honeywell HP300ULPD16CB 12/24VDC 2.5A, PS w/2 HPD8CB Distribution Boards & Encl Honeywell HP300ULPD4CB 2.5A 12/24VDC PS w/HPD4CB Distribution Board & Encl
    Honeywell HP300ULPD16CB 12/24VDC 2.5A, PS w/2 HPD8CB Distribution Boards & Encl The HP300ULPD4CB is a 12VDC or 24VDC power supply with AC fail and Battery fail supervision, and a power distribution board that provides 4 power-limited PTC protected outputs. Each output has LED indication of PTC activation for diagnostic purposes. The unit has not been evaluated as elevator equipment, and is not authorized for bell output in Mercantile applications.

    Specifications

    Power Supply Board

  • Input voltage: 120VAC 60Hz; Current: 1.40A max.
  • Output Voltage: 12VDC or 24VDC, jumper selectable; Current: 2.5A continuous output maximum, 2.0A plus battery charger (DC output not supervised).
  • Fail safe dry contact output on AC Failure (within one minute).
  • Built-in charger for sealed lead acid or gel cell type batteries.
  • Instantaneous transfer to stand-by battery on AC failure.
  • Battery presence detection (within 1 minute).
  • Battery low disconnect at 9.90VDC or 19.90VDC.
  • High voltage disconnect at 15VDC or 30VDC.
  • Yellow LED (L3) indication for battery disconnected and battery low.
  • Fail safe dry contact output for Battery trouble (Fail Safe).
  • Battery polarity reversal protection.
  • Thermal overload and short circuit protection.
  • DC output PTC activated indication by Red LED (L2).
  • DC output failure indication by Red LED ( L4 ).
  • AC presence indication by Green LED ( L1 ).
  • DC output indication by Red LED ( L5 ).
  • Battery Leads included.
  • Power Board Dimensions: 5L x 3.9W x 1.5H.
  • Enclosure Dimension: 17L x 13.5W x 4.75H. Accommodates two 12 Volt 12AH batteries. When using larger batteries, a UL approved enclosure must be used.

    Distribution Board

  • Power input may be either 12VDC or 24VDC.
  • 4 individually PTC Protected outputs rated 1.6A @ 23C with a maximum of 1.0A @ 49C (not supervised).
  • Total current should not exceed the power supply rating used in the application.
  • Green LED for input power indication.
  • Red LED illuminates to indicate PTC activation.
  • Board Dimensions 4.16 L x 2.6W x 0.8H.
  • Honeywell HP300ULPD8CB 12/24VDC 2.5A, PS W/HPD8CB Honeywell HP300ULX 12/24VDC 2.5A, UL PS
    Honeywell HP300ULPD8CB 12/24VDC 2.5A, PS W/HPD8CB 12/24VDC 2.5A, UL PS
    The HP300ULX switching power supply/charger provides 12 VDC/24VDC @ 2.5A of continuous supply current. This multi-function power supply has a wide range of applications for access control, fire and CCTV systems that require additional power. AC fail, low battery and battery presence monitoring included. Enclosure accommodates up to two (2) 12AH batteries.
    Specifications
  • Input 115VAC 60Hz
  • Switch selectable 12 VDC/24VDC.
  • 2.5 A continuous supply current at 12 VDC and 24VDC.
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead acid or gel type batteries.
  • UL Listed to UL294 for Access Control Systems, UL1481 for Fire
  • System Power Supplies and UL2044 for CCTV Systems
  • Maximum charge current 400 mA.
  • Input and output transient protection.
  • Automatic switchover to standby battery when AC fails.
  • Transformer has built-in thermal protection.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Hinged cover and vented enclosure with five convenient knockouts.
  • Battery leads included.
  • Operating temperature range: 4F to +95F (20C to +35C), indoor use only.
  • Cabinet dimensions: 13" (H) x 13.5" (W) x 3.25" (D)
  • Honeywell HP300ULX 2.5A 12/24VDC UL Listed PS & Encl Honeywell HP312CX 2.5A 6/12/24VDC PS, HTP2440, 5Ah Batt & Encl Kit
    Description
    The HP300ULX switching power supply/charger provides 12 VDC/24VDC @ 2.5A of continuous supply current. This multi-function power supply has a wide range of applications for access control, fire and CCTV systems that require additional power. AC fail, low battery and battery presence monitoring included. Enclosure accommodates up to two (2) 12AH batteries.
    Specifications
  • Input 115VAC 60Hz
  • Switch selectable 12 VDC/24VDC.
  • 2.5 A continuous supply current at 12 VDC and 24VDC.
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead acid or gel type batteries.
  • UL Listed to UL294 for Access Control Systems, UL1481 for Fire
  • System Power Supplies and UL2044 for CCTV Systems
  • Maximum charge current 400 mA.
  • Input and output transient protection.
  • Automatic switchover to standby battery when AC fails.
  • Transformer has built-in thermal protection.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Hinged cover and vented enclosure with five convenient knockouts.
  • Battery leads included.
  • Operating temperature range: 4F to +95F (20C to +35C), indoor use only.
  • Cabinet dimensions: 13" (H) x 13.5" (W) x 3.25" (D)
  • The HP312CX switching power supply/charger kit provides 6 VDC/12 VDC @ 2.5A or 24VDC @ 1A of continuous supply current. These general-purpose power supplies have a wide range of applications for access control, security and CCTV systems that require additional power. For convenient operation, this power supply comes kitted with a plug-in transformer, 5 Ah battery, steel enclosure, and connecting hardware.

    Specifications

  • Input 115VAC 60Hz
  • Switch selectable 6 VDC/12 VDC/24VDC.
  • 2.5 A continuous supply current at 6 VDC/12 VDC or 1A continuous supply current at 24VDC.
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead acid or gel type batteries.
  • UL Listed to UL294 for Access Control Systems and UL2044 for CCTV Systems
  • Maximum charge current 400 mA.
  • Input and output transient protection.
  • Automatic switchover to standby battery when AC fails.
  • Transformer has built-in thermal protection.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Hinged cover and vented enclosure with five convenient knockouts.
  • Battery leads included.
  • Operating temperature range: 4F to +95F (20C to +35C), indoor use only.
  • Cabinet dimensions: 11.5" W x 4.88" D x 10" H (29.21 cm W x 12.4 cm D x 25.4 cm H).
  • Honeywell HP400ULACM4 4A 12/24VDC 4A/3A UL Listed PS w/ HPACM4 Access Power Controller & Encl Honeywell HP400ULM 12/24VDC 4A/3A, PS W/ HPMOM5
    The HP400ULACM4 switching power supply/charger provides 12 VDC/24VDC @ 4A of continuous supply current, and includes the HPACM4 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and four independently operated and individually protected outputs rated 2.5 amps each. This multi-function power supply has a wide range of applications for access control and fire systems that require additional power. AC fail, low battery and battery presence monitoring included. Enclosure accommodates up to two (2) 12AH batteries.uire additional power. AC fail, low battery and battery presence monitoring included. Enclosure accommodates up to two (2) 12AH batteries.

    Specifications

  • Input 115VAC 60Hz
  • Switch selectable 12 VDC/24VDC.
  • 4 A continuous supply current at 12 VDC and 24VDC.
  • Includes the HPACM4 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and four independently operated and individually protected outputs rated 2.5 amps each.
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead acid or gel type batteries.
  • Input and output transient protection.
  • Automatic switchover to standby battery when AC fails.
  • Transformer has built-in thermal protection.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Hinged cover and vented enclosure with five convenient knockouts.
  • Battery leads included.
  • Operating temperature range: 4F to +95F (20C to +35C), indoor use only.
  • Cabinet dimensions: 13˝ (H) x 13.5˝ (W) x 3.25˝ (D)
  • 12/24VDC 4A/3A, PS W/ HPMOM5
    The HP400ULM switching power supply/charger provides 12 VDC/24VDC @ 4A of continuous supply current, and includes the HPMOM5 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and six individually protected PTC outputs rated 2.5 amps each.. This multi-function power supply has a wide range of applications for access control and fire systems that require additional power. AC fail, low battery and battery presence monitoring included. Enclosure accommodates up to two (2) 12AH batteries.

    Specifications
  • Input 115VAC 60Hz
  • Switch selectable 12 VDC/24VDC.
  • 4 A continuous supply current at 12 VDC and 24VDC.
  • Includes the HPMOM5 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and six dividually protected PTC outputs rated 2.5 amps each..
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead acid or gel type batteries.
  • UL Listed to UL294 for Access Control Systems, UL1481 for Fire
  • System Power Supplies and UL2044 for CCTV Systems
  • Maximum charge current 400 mA.
  • Input and output transient protection.
  • Automatic switchover to standby battery when AC fails.
  • Transformer has built-in thermal protection.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Hinged cover and vented enclosure with five convenient knockouts.
  • Battery leads included.
  • Operating temperature range: 4F to +95F (20C to +35C), indoor use only.
  • Cabinet dimensions: 13" (H) x 13.5" (W) x 3.25" (D)
  • Honeywell HP400ULM 4A 12/24VDC 6 Out UL Listed PS w/Fire Alarm Interface & Encl Honeywell HP400ULPD16CB 4A 12VDC or 3A 24VDC PS w/2 HPD8CB Distribution Boards & Encl
    Description
    The HP400ULM switching power supply/charger provides 12 VDC/24VDC @ 4A of continuous supply current, and includes the HPMOM5 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and six individually protected PTC outputs rated 2.5 amps each.. This multi-function power supply has a wide range of applications for access control and fire systems that require additional power. AC fail, low battery and battery presence monitoring included. Enclosure accommodates up to two (2) 12AH batteries.

    Specifications
  • Input 115VAC 60Hz
  • Switch selectable 12 VDC/24VDC.
  • 4 A continuous supply current at 12 VDC and 24VDC.
  • Includes the HPMOM5 interface which features fire alarm panel or access control system NO, NC or polarity reversal trigger input and six dividually protected PTC outputs rated 2.5 amps each..
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead acid or gel type batteries.
  • UL Listed to UL294 for Access Control Systems, UL1481 for Fire
  • System Power Supplies and UL2044 for CCTV Systems
  • Maximum charge current 400 mA.
  • Input and output transient protection.
  • Automatic switchover to standby battery when AC fails.
  • Transformer has built-in thermal protection.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Hinged cover and vented enclosure with five convenient knockouts.
  • Battery leads included.
  • Operating temperature range: 4F to +95F (20C to +35C), indoor use only.
  • Cabinet dimensions: 13" (H) x 13.5" (W) x 3.25" (D)
  • The HPACM4 and HPACM8 convert 1 12VDC or /24 VAC/VDC input to 4 or 8 independently controlled power-limited PTC Protected outputs. The modules accept inputs from open collector sink or Normally Open (NO) dry contacts from UL listed security devices such as keypads, card readers, access control systems, PIRs and Push Button Delays.

    Specifications

    Power Supply Board

  • Input voltage: 120VAC 60Hz; Current: 2.50A max.
  • Output Voltage: 12VDC or 24VDC, jumper selectable; Current: 4.0A continuous output maximum, 3.5A plus battery charger (DC output not supervised).
  • Fail safe dry contact output on AC Failure (within one minute).
  • Built-in charger for sealed lead acid or gel cell type batteries.
  • Instantaneous transfer to stand-by battery on AC failure.
  • Battery presence detection (within 1 minute).
  • Battery low disconnect at 9.90VDC or 19.90VDC.
  • High voltage disconnect at 15VDC or 30VDC.
  • Yellow LED (L3) indication for battery disconnected and battery low.
  • Fail safe dry contact output for Battery trouble (Fail Safe).
  • Battery polarity reversal protection.
  • Thermal overload and short circuit protection.
  • DC output PTC activated indication by Red LED (L2).
  • DC output failure indication by Red LED ( L4 ).
  • AC presence indication by Green LED ( L1 ).
  • DC output indication by Red LED ( L5 ).
  • Battery Leads included.
  • Power Board Dimensions: 6.2L x 4.7W x 2.5H.
  • Enclosure Dimension: 17L x 13.5W x 4.75H. Accommodates two
  • 12 Volt 12AH batteries. When using larger batteries, a UL approved enclosure must be used.

    Distribution Board

  • Power input may be either 12VDC or 24VDC.
  • 4 or 8 individually PTC Protected outputs rated 1.6A @ 23C with a maximum of 1.0A @ 49C (not supervised).
  • Total current should not exceed the power supply rating used in the application.
  • Green LED for input power indication.
  • Red LED illuminates to indicate PTC activation.
  • Board Dimensions 4 Output: 4.16 L x 2.6W x 0.8H,
  • 8 Output: 7.5 L x 2.6W x 0.8H
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please