|
|
|
|
|
|
|
|
|
Description
The HPACM4 multi-output power distribution module converts one non-power limited 12 to 24VAC or DC voltage input to four (4) independently controlled power limited outputs. The outputs can also be configured as dry form “C” contacts. Activated by an open collector sink or normally open dry trigger input from an access system, card reader, keypad, push button, PIR, etc. Outputs operate both fail-safe and fail-secure and will power magnetic locks, electric strikes, magnetic door holders, etc. It’s powered by either one common source or by two independent sources, one for board power and the other for accessory power. The FACP interface can trigger emergency exit, monitoring, HVAC shutdown, elevator recall or other auxiliary devices. The fire alarm disconnect is configurable for all affected or 50/50 mode. This convenient power distribution board has a wide range of applications for access control and fire systems that require individually protected outputs that switch independently.
Specifications
Input: 12 to 24VAC or DC, 10A max. Eight electronically regulated outputs have individual PTC circuit breakers Class 2 current rated 2.5A each. Use thermally protected power source Input and output transient protection. AC power LED indicator. Individual LED indicators for each output indicate PTC operation. Power & input trigger LEDs. Power fail supervision relay is form “C” rated 1 amp @ 28VDC/115VAC. Temperature range: -4ºF to 95ºF (-20ºC to 35ºC); use inside enclosure only. Board dimensions 8˝ (L) x 4.5˝ (W) x 1.25˝ (H).
|
The HPACM8 multi-output power distribution module converts one non-power limited 12 to 24VAC or DC voltage input to eight (8) independently controlled power limited outputs. The outputs can also be configured as dry form “C” contacts. Activated by an open collector sink or normally open dry trigger input from an access system, card reader, keypad, push button, PIR, etc. Outputs operate both fail-safe and fail-secure and will power magnetic locks, electric strikes, magnetic door holders, etc. It’s powered by either one common source or by two independent sources, one for board power and the other for accessory power. The FACP interface can trigger emergency exit, monitoring, HVAC shutdown, elevator recall or other auxiliary devices. The fire alarm disconnect is configurable for all affected or 50/50 mode. This convenient power distribution board has a wide range of applications for access control and fire systems that require individually protected outputs that switch independently. Specifications Input: 12 to 24VAC or DC, 20A max. Eight electronically regulated outputs have individual PTC circuit breakers Class 2 current rated 2.5A each. Use thermally protected power source Input and output transient protection. AC power LED indicator. Individual LED indicators for each output indicate PTC operation. Power & input trigger LEDs. Power fail supervision relay is form “C” rated 1 amp @ 28VDC/115VAC. Temperature range: -4ºF to 95ºF (-20ºC to 35ºC); use inside enclosure only. Board dimensions 8˝ (L) x 4.5˝ (W) x 1.25˝ (H).
|
|
|
|
|
|
|
|
|
|
|
|
|
The HPD4 power distribution board converts one low voltage power supply input to four individually fuse protected outputs. This convenient power distribution board has a wide range of applications for access control, security and CCTV systems that require individually protected outputs. Specifications Input: up to 28 VAC/VDC., 10A max Four electronically regulated outputs have individual fuses rated 3.0A each (up to 5A may be used), main fuse rated 5A Input and output transient protection. AC power LED indicator. Individual LED indicators for each output indicate blown fuse. Power disconnect switch. Unit maintains camera synchronization. Mounts with included foam backed tape or optional HST34 snap track. Temperature range: -4ºF to 95ºF (-20ºC to 35ºC); use inside enclosure only. Board dimensions: 3.5" H x 4.5" W x 1.0" D (8.89 cm H x 11.43 cm W x 2.54 cm D).
|
Description
The HPD4CB power distribution board converts one low voltage power supply input to four individually PTC protected outputs. This convenient power distribution board has a wide range of applications for access control, security and CCTV systems that require individually protected outputs.
Specifications
Input: up to 28 VAC/VDC., 10A max. Four electronically regulated outputs have individual PTC circuit breakers rated 2.5A each. Use thermally protected power source Input and output transient protection. AC power LED indicator. Individual LED indicators for each output indicate PTC operation. Power disconnect switch. Unit maintains camera synchronization. Mounts with included foam backed tape or optional HST34 snap track. Temperature range: -4ºF to 95ºF (-20ºC to 35ºC); use inside enclosure only. Board dimensions: 3.5" H x 4.5" W x 1.0" D (8.89 cm H x 11.43 cm W x 2.54 cm D).
|
|
|
|
|
|
|
|
|
|
|
|
Description
The HPD8 power distribution board converts one low voltage power supply input to eight individually fuse protected outputs. This convenient power distribution board has a wide range of applications for access control, security and CCTV systems that require individually protected outputs.
Specifications
Input: up to 28 VAC/VDC., 10A max Eight electronically regulated outputs have individual fuses rated 3.0A each (up to 5A may be used), main fuse rated 5A Input and output transient protection. AC power LED indicator. Individual LED indicators for each output indicate blown fuse. Power disconnect switch. Unit maintains camera synchronization. Mounts with included foam backed tape or optional HST34 snap track. Temperature range: -4ºF to 95ºF (-20ºC to 35ºC); use inside enclosure only. Board dimensions: 3.5" H x 4.5" W x 1.0" D (8.89 cm H x 11.43 cm W x 2.54 cm D).
|
The HPD8CB power distribution board converts one low voltage power supply input to eight individually PTC protected outputs. This convenient power distribution board has a wide range of applications for access control, security and CCTV systems that require individually protected outputs. Specifications Input: up to 28 VAC/VDC., 10A max. Eight electronically regulated outputs have individual PTC circuit breakers rated 2.5A each. Use thermally protected power source Input and output transient protection. AC power LED indicator. Individual LED indicators for each output indicate PTC operation. Power disconnect switch. Unit maintains camera synchronization. Mounts with included foam backed tape or optional HST34 snap track. Temperature range: -4F to 95F (-20C to 35C); use inside enclosure only. Board dimensions: 3.5" H x 4.5" W x 1.0" D (8.89 cm H x 11.43 cm W x 2.54 cm D).
|
|
|
|
|
|
|
|
|
|
|
|
|
12V/24V-6 PWR LIMITED OUTPT POWER DISTRIBUTION MODULE 6 Fused Output Distribution with Five Panel Interface This multi-output power distribution module converts one non-power limited 12VDC or 24VDC voltage input to 6 power limited outputs. Each output can be used to power magnetic locks, electric strikes, magnetic door holders, etc. Outputs switch together and operate both fail-safe and fail secure. Activation is through normally open or normally closed supervised input or the polarity reversal from a fire alarm control panel. A Form C dry output relay will enable HVAC Shutdown, elevator recall or trigger auxiliary devices. Class 2 current rated at 2.5A per output. Diagnostic LED’s per circuit. Power & input trigger LEDs. Power fail supervision relay is Form C rated 1A @ 28VDC/115VAC. Dimensions: 5.3" H x 3.5" W x 1" D (13.5cm H x 8.9cm W x 2.5cm D).
|
Description
The HPD4CB power distribution board converts one low voltage power supply input to four individually PTC protected outputs. This convenient power distribution board has a wide range of applications for access control, security and CCTV systems that require individually protected outputs.
Specifications
Input: up to 28 VAC/VDC., 10A max. Four electronically regulated outputs have individual PTC circuit breakers rated 2.5A each. Use thermally protected power source Input and output transient protection. AC power LED indicator. Individual LED indicators for each output indicate PTC operation. Power disconnect switch. Unit maintains camera synchronization. Mounts with included foam backed tape or optional HST34 snap track. Temperature range: -4ºF to 95ºF (-20ºC to 35ºC); use inside enclosure only. Board dimensions: 3.5" H x 4.5" W x 1.0" D (8.89 cm H x 11.43 cm W x 2.54 cm D).
|
|
|
|
|
|
|
|
|
|
|
|
Description
The HPD8 power distribution board converts one low voltage power supply input to eight individually fuse protected outputs. This convenient power distribution board has a wide range of applications for access control, security and CCTV systems that require individually protected outputs.
Specifications
Input: up to 28 VAC/VDC., 10A max Eight electronically regulated outputs have individual fuses rated 3.0A each (up to 5A may be used), main fuse rated 5A Input and output transient protection. AC power LED indicator. Individual LED indicators for each output indicate blown fuse. Power disconnect switch. Unit maintains camera synchronization. Mounts with included foam backed tape or optional HST34 snap track. Temperature range: -4ºF to 95ºF (-20ºC to 35ºC); use inside enclosure only. Board dimensions: 3.5" H x 4.5" W x 1.0" D (8.89 cm H x 11.43 cm W x 2.54 cm D).
|
The HPTV09 power distribution unit converts one low voltage power supply input to nine individually PTC protected outputs. The unit contains screw terminals and a 2.1 mm coax plug found on many DC supplies. The snap fit case is impact resistant white plastic (paintable) and has conduit and wireway openings. This convenient power distribution unit has a wide range of applications for CCTV systems that require individually protected outputs in a convenient enclosure. Specifications
Input: up to 30VAC/VDC, 2.3 A max. Nine electronically regulated outputs have individual PTC circuit breakers rated 250mA each. Use thermally protected power source Input and output transient protection. AC power LED indicator. Individual LED indicators for each output indicate PTC operation. Power disconnect switch. Unit maintains camera synchronization. Mounts with included mounting hardware. Temperature range: -4ºF to 95ºF (-20ºC to 35ºC); use inside enclosure only. Dimensions 6.5" (L) x 4.3" (W) x 2.0" (D).
|
|
|
