You are here: Home > Shop Brands > Honeywell Power Products > General Security Supplies
We found 4 results matching your criteria.
General use power supplies are used in a wide variety of applications where additional power in a compact size is needed. Typical uses are in CCTV, security and access control systems that require additional power for magnetic locks, heaters, blowers, cam
Sort By:
Page of 1
Honeywell Power HPL624 1.2A 6/12VDC or .75A 24VDC Linear PS Honeywell Power HPL624-12C 6/12VDC @1.2A or 24VDC @.75A 1.2A PS W 12V Bat & Encl
Description

The HPL624 linear power supply/charger converts low-voltage AC input into 6 VDC or 12 VDC @ 1.20 amps or 24 VDC at 0.75 A of continuous supply current. This general-purpose power supply has a wide range of applications for access control, security and CCTV systems that require additional power. For convenient operation using line power, select a plug-in transformer from the table below:

Specifications

  • Input low voltage AC – chose transformer from table below
  • Switch-selectable for 6 VDC, 12 VDC, or 24 VDC.
  • 1.20 A continuous supply current at 6 VDC/12 VDC.
  • 0.75 A continuous supply current at 24 VDC.
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead-acid or gel-type batteries.
  • Maximum charge current: 300 mA.
  • Automatic switchover to standby battery when AC fails.
  • Thermally limited design.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Compact design.
  • Operating temperature range: –4°F to +95°F (–20°C to +35°C), indoor use only.
  • Battery leads included.
  • Mounts with foam backed tape (included) or optional “snap track” (P/N HST34).
  • Board dimensions: 4.0" x 3.0" x 1.5" deep (cm: 10.16 x 7.62 x 3.81 deep).

    • HPL624 Transformer Selection Table

    Desired Power Supply Output Transformer Rating
    6 VDC Output 12 VAC 20VA
    12 VDC Output 16.5 VAC 40VA
    24 VDC Output 24VAC 40VA
    Note: Greater VA transformer may be used up to 50VA, but do not exceed VAC ratings.
    HPL624-12C Description

    The HPL624-12C linear power supply/charger converts low voltage AC input into 6VDC or 12VDC @ 1.2 amps or 24VDC @ .75A of continuous supply current. It comes with a transformer for 12VDC operation and a 5Ah 12V battery.

    Specifications

  • Switch-selectable for 6 VDC, 12 VDC, or 24 VDC.
  • 1.20 A continuous supply current at 6 VDC/12 VDC.
  • 0.75 A continuous supply current at 24 VDC.
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead-acid or gel-type batteries.
  • Maximum charge current: 300 mA.
  • Automatic switchover to standby battery when AC fails.
  • Thermally limited design.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Operating temperature range: –4°F to +95°F (–20°C to +35°C), indoor use only.
  • 12V 5Ah battery and bBattery leads included.
  • Plug in transformer (HTP1640) for 12V operation included.
  • Cabinet dimensions: 11.5" W x 4.88" D x 10" H (29.21 cm W x 12.4
    • Honeywell Power HPS3 2.5A 6/12/24VDC PS Board Honeywell Power HPS5 4A 6/12/24VDC PS Board
    Description 

    The HPS3 switching power supply/charger converts low-voltage AC input into 6 VDC, 12 VDC, or 24 VDC @ 2.5 A of continuous supply current. This general-purpose power supply has a wide range of applications for access control, security and CCTV systems that require additional power. For convenient operation using line power, select a transformer from the table below.
    Specifications

  • Input low voltage AC – select transformer from table below.
  • Switch-selectable for 6VDC, 12VDC, or 24VDC.
  • 2.5 A continuous supply current at 6 VDC, 12VDC, or 24VDC.
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead-acid or gel-type batteries.
  • Maximum charge current: 400 mA.
  • Automatic switchover to standby battery when AC fails.
  • Thermally limited design.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Compact design.
  • Operating temperature range: –4°F to +95°F (–20°C to +35°C), indoor use only.
  • Battery leads included.
  • Mounts with foam tape (included) or optional “snap track,” HST34.
  • Board dimensions: 4.0" x 3.0" x 1.5" deep (cm: 10.16 x 7.62 x 3.81 deep).

    • HPS 3 Transformer Selection Table

    Desired Power Supply Output Transformer Rating
    6 VDC Output 16.5 VAC 40VA
    12 VDC Output 24 VAC 50VA
    24 VDC Output 28VAC 100VA
    Note: Greater VA transformer may be used, but do not exceed VAC ratings.
    Description

    The HPS5 switching power supply/charger converts low-voltage AC input into 6 VDC, 12 VDC, or 24 VDC @ 4.0 A of continuous supply current. This general-purpose power supply has a wide range of applications for access control, security and CCTV systems that require additional power. For convenient operation using line power, select a transformer from the table:

    Specifications
  • Input low voltage AC – Select transformer from table below.
  • Switch-selectable for 6VDC, 12VDC, or 24VDC.
  • 4.0 A continuous supply current at 6VDC, 12VDC, or 24VDC.
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead-acid or gel-type batteries.
  • Maximum charge current: 400 mA.
  • Automatic switchover to standby battery when AC fails.
  • Thermally limited design.
  • Circuit-breaker battery protection.
  • AC input and DC output LED diagnostic indicators.
  • Compact design.
  • Operating temperature range: –4°F to +95°F (–20°C to +35°C), indoor use only.
  • Battery leads included.
  • Mounts with foam tape (included) or optional “snap track,” HST34.
  • Board dimensions: 4.0" x 3.0" x 2.1" deep (cm: 10.16 x 7.62 x 5.33 deep).

    • HPS 5 Transformer Selection Table

    Desired Power Supply Output Transformer Rating
    6 VDC Output 24 VAC 50VA
    12 VDC Output 28VAC 100VA
    24 VDC Output 28 VAC 175VA
    Note: Greater VA transformer may be used, but do not exceed VAC ratings.