OA-202C provides Threshold Safety and Activation signaling for sliding or swing style automatic doors. Its detection area is precise, easily aimed, and relatively unaffected by environmental changes. A programmable Threshold Safety circuit actually 'learns' and adjusts to immobile objects, such as boxes or magazine racks that might be placed in the detection area. By incorporating SMD (Surface Mount Device) technology, micro-computer based signal processing and industry leading optical systems, OPTEX is able to provide superior reliability and safety in ONE compact package.

The PROSAFE OA-202C will not only activate an automatic door from over 2m (7ft.) away, but also recognizes the presence of a motionless person from up to 0.8m (2.6ft.) away from the door's threshold, even at floor level. "Hold Open Time" is selectable from 2, 60 or 180 seconds. If any motion is detected during the hold open period, the timer will reset and begin again.

Deep and Wide Detection Area - the OA-202C's detection area consists of 29 individual detection zones which represent 2.3 m. width x 3.0 m. depth maximum at a 2.5 m. mounting height (7.5 ft. width x 9.8 ft. depth at a 8.2 ft. mounting height.) The width and depth of the detection area can be easily adjusted to obtain the desired detection area.

OA-202C provides Threshold Safety and Activation signaling for sliding or swing style automatic doors. Its detection area is precise, easily aimed, and relatively unaffected by environmental changes. A programmable Threshold Safety circuit actually 'learns' and adjusts to immobile objects, such as boxes or magazine racks that might be placed in the detection area. By incorporating SMD (Surface Mount Device) technology, micro-computer based signal processing and industry leading optical systems, OPTEX is able to provide superior reliability and safety in ONE compact package.

The PROSAFE OA-202C will not only activate an automatic door from over 2m (7ft.) away, but also recognizes the presence of a motionless person from up to 0.8m (2.6ft.) away from the door's threshold, even at floor level. "Hold Open Time" is selectable from 2, 60 or 180 seconds. If any motion is detected during the hold open period, the timer will reset and begin again.

Deep and Wide Detection Area - the OA-202C's detection area consists of 29 individual detection zones which represent 2.3 m. width x 3.0 m. depth maximum at a 2.5 m. mounting height (7.5 ft. width x 9.8 ft. depth at a 8.2 ft. mounting height.) The width and depth of the detection area can be easily adjusted to obtain the desired detection area.

OA-202C provides Threshold Safety and Activation signaling for sliding or swing style automatic doors. Its detection area is precise, easily aimed, and relatively unaffected by environmental changes. A programmable Threshold Safety circuit actually 'learns' and adjusts to immobile objects, such as boxes or magazine racks that might be placed in the detection area. By incorporating SMD (Surface Mount Device) technology, micro-computer based signal processing and industry leading optical systems, OPTEX is able to provide superior reliability and safety in ONE compact package.

The PROSAFE OA-202C will not only activate an automatic door from over 2m (7ft.) away, but also recognizes the presence of a motionless person from up to 0.8m (2.6ft.) away from the door's threshold, even at floor level. "Hold Open Time" is selectable from 2, 60 or 180 seconds. If any motion is detected during the hold open period, the timer will reset and begin again.

Deep and Wide Detection Area - the OA-202C's detection area consists of 29 individual detection zones which represent 2.3 m. width x 3.0 m. depth maximum at a 2.5 m. mounting height (7.5 ft. width x 9.8 ft. depth at a 8.2 ft. mounting height.) The width and depth of the detection area can be easily adjusted to obtain the desired detection area.

The OA-203 is an active infrared motion & presence sensor designed for use with any manufacturer's automatic door as add-on safety or side-light protection sensor. The OA-203 may also be used on single and double pair swing doors, bi-fold doors, low-energy power operated doors, drive-through windows, vestibule, or anywhere with limited approach requirement

With Activation and Safety detection in one unit, OA-203C is two sensors in one. Fast installation and service, and laser-sharp Active Infrared Technology are just a few of OA-203C's benefits. Its versatile detection area solves problems caused by narrow vestibules and 'ghosting' and provides additional safety or side light protection.

The OA-203 is an active infrared motion & presence sensor designed for use with any manufacturer's automatic door as add-on safety or side-light protection sensor. The OA-203 may also be used on single and double pair swing doors, bi-fold doors, low-energy power operated doors, drive-through windows, vestibule, or anywhere with limited approach requirement

With Activation and Safety detection in one unit, OA-203C is two sensors in one. Fast installation and service, and laser-sharp Active Infrared Technology are just a few of OA-203C's benefits. Its versatile detection area solves problems caused by narrow vestibules and 'ghosting' and provides additional safety or side light protection.

The OA-203 is an active infrared motion & presence sensor designed for use with any manufacturer's automatic door as add-on safety or side-light protection sensor. The OA-203 may also be used on single and double pair swing doors, bi-fold doors, low-energy power operated doors, drive-through windows, vestibule, or anywhere with limited approach requirement

With Activation and Safety detection in one unit, OA-203C is two sensors in one. Fast installation and service, and laser-sharp Active Infrared Technology are just a few of OA-203C's benefits. Its versatile detection area solves problems caused by narrow vestibules and 'ghosting' and provides additional safety or side light protection.

PROSWING OA-601C is ideally suited for any brand of automatic swinging door and was developed to assure the presence of a safety signal at the door control in the event a person or an object is detected within the swing-zone of an automatic swinging door. The presence detection timer can be preset to 2, 60 or 180 seconds of duration.

Utilizing the same advanced active infrared technology found in our PROSAFE products, Pro-Swing employs a lockout relay and infrared beam (OS-1C2C) to form a complete safety system.

OPTEX provides 4 unique pairs of prism lenses to conform the presence pattern to a precise fit for any size door (single or pair). These lenses form 18 precise detection zones which are easily configured to fit single or double doors in just seconds. These detection areas eliminate troublesome guesswork normally associated with adjusting detector sensitivity.

PROSWING OA-601C is ideally suited for any brand of automatic swinging door and was developed to assure the presence of a safety signal at the door control in the event a person or an object is detected within the swing-zone of an automatic swinging door. The presence detection timer can be preset to 2, 60 or 180 seconds of duration.

Utilizing the same advanced active infrared technology found in our PROSAFE products, Pro-Swing employs a lockout relay and infrared beam (OS-1C2C) to form a complete safety system.

OPTEX provides 4 unique pairs of prism lenses to conform the presence pattern to a precise fit for any size door (single or pair). These lenses form 18 precise detection zones which are easily configured to fit single or double doors in just seconds. These detection areas eliminate troublesome guesswork normally associated with adjusting detector sensitivity.

PROSWING OA-601C is ideally suited for any brand of automatic swinging door and was developed to assure the presence of a safety signal at the door control in the event a person or an object is detected within the swing-zone of an automatic swinging door. The presence detection timer can be preset to 2, 60 or 180 seconds of duration.

Utilizing the same advanced active infrared technology found in our PROSAFE products, Pro-Swing employs a lockout relay and infrared beam (OS-1C2C) to form a complete safety system.

OPTEX provides 4 unique pairs of prism lenses to conform the presence pattern to a precise fit for any size door (single or pair). These lenses form 18 precise detection zones which are easily configured to fit single or double doors in just seconds. These detection areas eliminate troublesome guesswork normally associated with adjusting detector sensitivity.