You are here: Home > Wire & Cable > Structured Wiring > Video Modulator
We found 9 results matching your criteria.
Sort By:
Page of 1
OpenHouse  5545: Four-Channel Video Modulator with IR - REPLACES # 5445 OpenHouse 5415: One-Channel Video Modulator
The 5545 Four-channel Video Modulator with IR converts four video and stereo audio inputs to four programmable TV channels (stereo audio is converted to monaural audio after modulation). It has IR emitter output jacks and the ability to remotely power a H838 series distribution amplifier from up to 75' away.

The 5545 works with both the 12-volt and 5-volt IR systems and accessories and offers video loop-through. Jumpers on the Model 5545 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Four modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • IR remote control signals from IR targets passes back through the system coax to IR emitters
  • Pushbutton digital programming of modulated channels
  • Can remotely power H838 series distribution amplifiers
  • The 5415 One-channel Video Modulator has the same output power as the rest of the 5400 series, but it is a quarter of the size. Video and stereo audio inputs are modulated to a programmable TV channel (stereo audio is converted to monaural audio after modulation).

    The 5415 modulator offers video loop-through. A jumper terminates the video input at 75 ohms. When the jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • One modulated TV channel
  • Creates a TV channel for a camera or other video source
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • Pushbutton digital programming of modulated channel
  • Compatible with H838BID and H838HHR distribution amplifiers
  • OpenHouse 5425: Two-Channel Video Modulator OpenHouse 5435: Three-Channel Video Modulator
    The 5425 Two-channel Video Modulator converts two video and stereo audio inputs to two programmable TV channels (stereo audio is converted to monaural audio after modulation).

    The 5425 modulator offers video loop-through. Jumpers on the Model 5425 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Two modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • Pushbutton digital programming of modulated channels
  • Compatible with H838BID and H838HHR distribution amplifiers
  • The 5435 Three-channel Video Modulator converts three video and stereo audio inputs to three programmable TV channels (stereo audio is converted to monaural audio after modulation). It offers video loop-through. Jumpers located on the back of the Model 5435 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Three modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • Pushbutton digital programming of modulated channels
  • Compatible with H838BID and H838HHR distribution amplifiers
  • OpenHouse 5445: Four-Channel Video Modulator OpenHouse 5515: One-Channel Video Modulator with IR
    The 5445 Four-channel Video Modulator converts four video and stereo audio inputs to four programmable TV channels (stereo audio is converted to monaural audio after modulation). The 5445 offers video loop-through. Jumpers on the 5445 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Four modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • Pushbutton digital programming of modulated channels
  • Compatible with H838BID and H838HHR distribution amplifiers
  • The 5515 One-channel Video Modulator with IR has the same output power as the rest of the 5500 series, but it is a quarter of the size. Video and stereo audio inputs are modulated to a programmable TV channel (stereo audio is converted to monaural audio after modulation), and has an IR emitter output jack and the ability to remotely power a H838 series distribution amplifier from up to 75' away.

    The 5515 works with both the 12-volt and 5-volt IR systems and accessories. The Model 5515 modulator offers video loop-through. A jumper on the Model 5515 terminates the video input at 75 ohms. When the jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • One modulated TV channel
  • Creates a TV channel for a camera or other video source
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • IR remote control signals from an IR target passes back through the system coax to an IR emitter
  • Pushbutton digital programming of modulated channel
  • Can remotely power H838 series distribution amplifiers
  • OpenHouse 5525: Two-Channel Video Modulator with IR OpenHouse SVM-22: Two-Input S-Video Modulator
    The >5525 Two-channel Video Modulator with IR converts two video and stereo audio inputs to two programmable TV channels (stereo audio is converted to monaural audio after modulation). It has IR emitter output jacks and the ability to remotely power a H838 series distribution amplifier from up to 75' away.

    The 5525 works with both the 12-volt and 5-volt IR systems and accessories. The Model 5525 modulator offers video loop-through. Jumpers on the Model 5525 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

  • Two modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • IR remote control signals from IR targets passes back through the system coax to IR emitters
  • Pushbutton digital programming of modulated channels
  • Can remotely power H838 series distribution amplifiers
  • The SVM-22 Two-Input S-Video Modulator is a two channel stereo modulator with 25 dBmV of output and easy push button programming. It offers complete MTS stereo encoding and S-video inputs in a full component size rack mountable case.

    The unit incorporates S-video inputs that support both S-video and composite video feeds with included adapters. Offering full MTS stereo with dbx® noise reduction and compatibility with Dolby Pro Logic® makes the Model SVM-22 perfect for integration into any home theater system.

    The SVM-22 offers integrated IR control. Each modulator has an IR emitter output jack and is compatible with both 12-volt or 5-volt IR systems. It can remotely power a H838BID or H838HHR video hub from up to 75 feet away.

    The SVM-22 offers full loop-through outputs with 75-ohm auto-termination. By connecting video/audio cables to the output jacks, all video and audio signals will pass through for use with a local monitor, VCR or DVR. It is designed to fit any 19" EIA rack (mounting ears included). The unit is one rack space high.

  • S-video inputs
  • Full MTS stereo sound
  • dbx® noise reduction
  • Supports Dolby Pro Logic®
  • Surround sound support
  • Can remotely power H838BID or H838HHR video hub
  • Mounts with other home theater components in a 19" EIA rack
  • Integrated IR control - compatible with 5-volt or 12-volt systems
  • OpenHouse SVM-24: Four-Input S-Video Modulator
    The SVM-24 Four-Input S-Video Modulator is a two channel stereo modulator with 25 dBmV of output and easy push button programming. It offers complete MTS stereo encoding and S-video inputs in a full component size rack mountable case.

    The unit incorporates S-video inputs that support both S-video and composite video feeds with included adapters. Offering full MTS stereo with dbx® noise reduction and compatibility with Dolby Pro Logic® makes the Model SVM-24 perfect for integration into any home theater system.

    The SVM-24 offers integrated IR control. Each modulator has an IR emitter output jack and is compatible with both 12-volt or 5-volt IR systems. It can remotely power a H838BID or H838HHR video hub from up to 75 feet away.

    The SVM-24 offers full loop-through outputs with 75-ohm auto-termination. By connecting video/audio cables to the output jacks, all video and audio signals will pass through for use with a local monitor, VCR or DVR. It is designed to fit any 19" EIA rack (mounting ears included). The unit is one rack space high.

  • S-video inputs
  • Full MTS stereo sound
  • dbx® noise reduction
  • Supports Dolby Pro Logic®
  • Surround sound support
  • Can remotely power H838BID or H838HHR video hub
  • Mounts with other home theater components in a 19" EIA rack
  • Integrated IR control - compatible with 5-volt or 12-volt systems
  •    
     
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please