The 5110XM is a UL Listed, microprocessor based fire alarm control/communicator that supports five hardwired zones. It may be used as a slave Digital Alarm Communicator Transmitter (DACT) providing central or remote station service for a central or remote station listed Fire Alarm Control Panel (FACP). It may also be used as a stand alone non-coded local, central station or remote station control.

The model 5110XM is fully supervised and supports one two-wire smoke detection circuit and four-wire smoke detectors on all five circuits. Its powerful microprocessor continuously monitors and reports system status of AC, standby battery, zone inputs and telephone line connections. In the event of a fault condition a local audible sound is activated as well as reporting directly to central station.

FEATURES

• Five supervised style B zones
• One master code
• Five user codes
• Seven built-in LED indicators
• One notification appliance circuit
• Temporal code compliant
• Supervised digital dialer
• Optional panel door mounted silence/reset switch when AHJ approved
• Supports two-wire compatible smoke detector
• Supports up to four keypads
• Backup digital dialer built in
• Auxiliary form "C" relay
• Built-in warning buzzer
• Programmable via 6139R alpha keypad or downloader
• Supports major communication formats
• UL864 Listed
• NFPA 72 compliant
• MEA Approved
• Upload/Download capable

INSTALLATION
The 5110XM Fire Alarm Communicator (DACT) has been designed to mount both quickly and easily. It meets all applicable requirements for UL Commercial Fire installations. Remotely program and troubleshoot this panel via ADEMCO’s Windows^TM based Compass Downloader.

SPECIFICATIONS:

Electrical:

Primary power:

• 20VAC, 60Hz, 600mA max
• Secondary rated 18VAC, 40VA

  Quiescent panel current draw:

• 155mA

  Backup battery:

• 1 2VDC, 7AH min to 14AH max
• Lead acid battery (gel type)

  Charging voltage:

• 1 3.7VDC, nominal

  Alarm power:

• 12VDC, 1.0A max for notification (bell) output

  Aux. standby power:

• 12VDC,350mA max

  Total power:

• 1.0A from all sources

  Aux. relay output:

• Type: Form C

  Standby time:

• 24 hours with 1A standby load or 60 hours with 210mA max standby load using 14AH battery

  Fusing:

• Battery input, aux. and notification (bell) appliance circuits are protected using PTC circuit protectors. All outputs are power limited.

Dialers:

Line seize:

Designed as a cellular backup for fire applications, Honeywell’s 7845CF takes advantage of the latest advances in Control Channel Cellular design—offering virtually limitless coverage at an affordable price.

The 7845CF eliminates the need for a secondary dedicated phone line and helps increase recurring monthly revenue. It replaces the 7835CFPK when used with an ADEMCO control in ECP mode. The included 6V, 4.5A hour battery and internal battery charger provide more than 24 hours of backup time.

All signals are delivered to the AlarmNet Control Center, which routes the information to the appropriate central station. The AlarmNet Control Center is fully redundant and monitored 24 hours a day, seven days a week.

AlarmNet has the ability to route messages using the AlarmNet “A”, AlarmNet “M”, AlarmNet “i” and 800 plus networks; all of which provide true redundancy and virtually guarantee message delivery.

Includes: Cell radio, red cabinet, backup battery and battery cable, transformer, antenna, wiring for connecting antenna.

Features:

Designed as a cellular backup for fire applications, Honeywell’s 7845CZF works with any product that provides outputs via contact closure or voltage trigger. The 7845CZF takes advantage of the latest advances in Control Channel Cellular design—offering virtually limitless coverage at an affordable price.

The 7845CZF eliminates the need for a secondary dedicated phone line and helps increase recurring monthly revenue. It replaces the 7835CFPK when zone inputs are required. The included 6V, 4.5A hour battery and internal battery charger provide more than 24 hours of backup time.

All signals are delivered to the AlarmNet Control Center, which routes the information to the appropriate central station. The AlarmNet Control Center is fully redundant and monitored 24 hours a day, seven days a week.

AlarmNet has the ability to route messages using the AlarmNet “A”, AlarmNet “M”, AlarmNet “i” and 800 plus networks; all of which provide true redundancy and the highest reliability in message delivery.

INCLUDES: Cell radio, red cabinet, backup battery and battery cable, transformer, antenna, wiring for connecting antenna

Features:

Honeywell is focused on providing the future of alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks.

Honeywell’s 7845GSMR delivers secure, reliable and complementary digital communications via the GSM (Global System for Mobile) network. Our use of Dual-Path GPRS service with SMS backup provides substantial benefits to protect your investment by future-proofing your recurring revenue.

This groundbreaking communications solution offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, with on-board zone inputs and optional dialer capture capability we’re compatible with other manufacturers’ security panels as well.

All signals are delivered to Honeywell’s AlarmNet Network Control Center, which routes the information to the appropriate central station. The state of the art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery.

FEATURES