|
|
|
|
|
|
|
|
|
Features: Description: Pet Alley Lens Coverage:
- 1990: 60' x 90' (18M x 27M)
- 1992: 50' x 70' (15M x 21.3M) Pulse Count Setting: 2-3* Recommended Mounting: 3-3.5 (0.9M-1.1M) Pattern Setting Deg.: +2º(D) 0º(Q) Correction (in°) per Ft If not mounted at Recommended Height (Pattern Up or Down):
- Higher: Down 1º/ft (1º/30cm)
- Lower: Up 1º/ft (1º/30cm)
* The 3-event pulse count setting provides maximum protection against false alarms caused by environmental disturbances. It may be programmed for wide angle lens applications only when range of the protected area is no greater than 30 ft (approx. 9m).
|
Using ADEMCO's motion detectors for multiplex system is a smart and sensible thing to do. Whether it's a commercial or residential installation, these newest sensors offer you the following cost-saving benefits: - Point ID identifies the exact location of the intruder. And with the built-in Remote Point Module, the cost is less than a separate module and sensor.
- ADEMCO's patented Global Polling technology senses alarms up to 8 times faster than conventional multiplex.
- ADEMCO's unique 2-wire multiplex reduces installation costs over conventional 4-wire hardwire and multiplex approaches: Wire cost is reduced and less than half the number of connections are necessary - No more need to home run wiring
Each sensor draws super low current, reducing power & battery requirements on large installations while allowing for longer wire runs or smaller gauge wire Features: 35' x 45' coverage Built-in Remote Point Module with DIP switch addressing SMD construction for excellent RFI immunity Spare long range mirror Extremely low current Tamper 6 year over-the-counter warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
It makes sense to use ADEMCO's smart motion detectors for multiplex systems. Not only are they smarter than ever, but they provide the opportunity to reduce your overall installation costs! The 4278EX and 4278EX-SN can be used with any Honeywell alarm system that supports Multiplex Addressing, including the VISTA-40, VISTA-50, 4140XMP, and VISTA-100. The 4278EX may also be used with the 5140XM. Features: Built-in Remote Point Module with Point ID identifies the exact location of the intruder with either a DIP Switch Address (4278EX) or a Serial Number Address as distinctive as a fingerprint (4278EX-SN) Honeywell’s patented Global Polling technology senses alarms up to eight times faster than conventional multiplex Honeywell’s unique two-wire multiplex reduces installation costs over conventional four-wire hardwire and multiplex approaches by reducing both wire costs and the number of connections Super low current, reduces power and battery requirements on large installations Tamper Extra Contact Loop 40ft. x 50ft. Coverage Quad AP Processing for Improved False Alarm Immunity Built-In Remote Point Module Six Year Warranty Specifications: Detection Method: Passive Infrared Coverage:
- wide angle mirror: 40' x 50' (12.2m x 15.2m)
- long range/curtain mirror: 80' x 7.5' (24.4m x 2.3m) Detection Pattern 12 zones - seven main, four intermediate, One downward (wide angle mirror) 1 zone, seven tiers (long range/curtain mirror) Pulse Count: Signal processing/instant response (installer selectable) Detectable Walk Rate 0.5-5 ft/sec (0.15-1.5m/sec) Mounting 7' (2.1m) nominal Indicators: Red LED with enable/disable switch Input Voltage 8-11V peak at polling loop terminals Current Less than 1mA (LED) inactive, 9mA approx. (LED active) Operating Temp: 32° to 122°F (0° to 50°C) Operating Humidity: Up to 95% RH (max.), non-condensing Dimensions: 3 1/4"W x 4 5/8"H x 2"D (85mm x 120mm x 50mm)
|
It makes sense to use ADEMCO's smart motion detectors for multiplex systems. Not only are they smarter than ever, but they provide the opportunity to reduce your overall installation costs! The 4278EX and 4278EX-SN can be used with any Honeywell alarm system that supports Multiplex Addressing, including the VISTA-40, VISTA-50, 4140XMP, and VISTA-100. The 4278EX may also be used with the 5140XM. Features: Built-in Remote Point Module with Point ID identifies the exact location of the intruder with either a DIP Switch Address (4278EX) or a Serial Number Address as distinctive as a fingerprint (4278EX-SN) Honeywell’s patented Global Polling technology senses alarms up to eight times faster than conventional multiplex Honeywell’s unique two-wire multiplex reduces installation costs over conventional four-wire hardwire and multiplex approaches by reducing both wire costs and the number of connections Super low current, reduces power and battery requirements on large installations Tamper Extra Contact Loop 40ft. x 50ft. Coverage Quad AP Processing for Improved False Alarm Immunity Built-In Remote Point Module Six Year Warranty Specifications: Detection Method: Passive Infrared Coverage:
- wide angle mirror: 40' x 50' (12.2m x 15.2m)
- long range/curtain mirror: 80' x 7.5' (24.4m x 2.3m) Detection Pattern 12 zones - seven main, four intermediate, One downward (wide angle mirror) 1 zone, seven tiers (long range/curtain mirror) Pulse Count: Signal processing/instant response (installer selectable) Detectable Walk Rate 0.5-5 ft/sec (0.15-1.5m/sec) Mounting 7' (2.1m) nominal Indicators: Red LED with enable/disable switch Input Voltage 8-11V peak at polling loop terminals Current Less than 1mA (LED) inactive, 9mA approx. (LED active) Operating Temp: 32° to 122°F (0° to 50°C) Operating Humidity: Up to 95% RH (max.), non-condensing Dimensions: 3 1/4"W x 4 5/8"H x 2"D (85mm x 120mm x 50mm)
|
|
|
|
|
|
|
|
|
|
|
|
|
Superior RFI Test Methods The Radio Frequency Interference (RFI) test method used by ADEMCO's Quality Assurance department is superior to the methods used by most other manufacturers. A Transverse ElectroMagnetic (TEM) cell used by most other manufacturers is a small chamber in which products are placed and then irradiated with RF energy at an established level to try to induce a false alarm. Unfortunately, TEM cells are susceptible to standing waves and other phenomena which have a tendency to overstate the level of immunity. ADEMCO uses a full-size, shielded RF chamber that more realistically emulates real world conditions. To maintain high accuracy, the chamber is calibrated to the desired RF energy level at every test frequency prior to running each test. Comparison tests between and ADEMCO's full-size chamber and a TEM cell have shown that an immunity of 10V/m in ADEMCO's chamber corresponds to an immunity of 20-30V/m in a TEM cell. Features: 40' x 56' coverage Attractive styling Fits single gang box or can be recessed into wall Built-in "Signature Analysis" pulse count reduces false alarms Horizontal and vertical adjustment Excellent RFI immunity SMD construction 6 year over-the-counter warranty
|
Long range lens 70 ft. x 8.5 ft. coverage
|
|
|
|
|
|
|
|
|
|
|
|
|
Pet alley lens 40 ft. x 50 ft. coverage
|
Honeywell's 997 Ceiling Mount PIR (passive infrared) Motion Sensor is designed to be mounted in small to medium sized rooms between 8' and 12' high. Optimal performance is achieved when the detector is mounted on the ceiling in the center of the protected area. While a single 997 is ideal for sensing motion in rooms up to 30' x 30', multiple detectors are recommended when protecting larger areas like classrooms, meeting rooms, public lobbies and storage areas. Mounting the detector on the ceiling helps minimize vandalism and tampering making it especially effective in public areas such as schools and retail establishments. The compact, discrete size makes it a nearly invisible way to detect motion, so it will not detract from the style or architecture of the protected area. Features: 360 look down capability 8'-12' mounting height Twist-off cover for easy removal Locally & remotely controllable walk test LED Selectable pulse count Tampered front cover SMD technology 6 year over-the-counter warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
It makes sense to use ADEMCO's 998MX multiplex motion detector. Not only is it smarter than ever, but it provides the opportunity to reduce your overall installation costs! Whether it's a commercial or residential installation, the 998MX offers you the following benefits: Point ID identifies the exact location of the intruder with either a DIP Switch Address or a Serial Number Address as distinctive as a fingerprint. And with the built-in Remote Point Module, the cost is less than a separate module and sensor. ADEMCO's patented Global Polling technology senses alarms up to up to 8 times faster than conventional multiplex. ADEMCO's unique 2-wire multiplex reduces installation costs over conventional 4-wire hardwire and multiplex approaches. Wire cost is reduced and less than half the number of connections are necessary. No more need to home run wiring. Each sensor draws super low current, reducing power & battery requirements on large installations while allowing for longer wire runs or smaller gauge wire. Features: 50' x 50' coverage Built-in Remote Point Module Both DIP switch and serial number addressing EZ-Mount features for fast installation Includes additional long range and pet alley lenses Horizontal and vertical pattern adjustment Automatic temperature compensation Extremely low current Tamper 6 year over-the-counter warranty
|
This bracket fits the Ademco 998 PIR Motion Detector, for swivel mounting
|
|
|
|
|
|
|
|
|
|
|
|
|
Don't be fooled by its small size! Next-generation Split-Zone Optics and advanced ASIC-based processing give the pet immune Aurora laser-sharp detection. Features: Immune to pets up to 40 lbs. Advanced ASIC-based processing Split-Zone Optics technology Ultra-low current Totally silent relay operation Tamper proof design
Specifications: Detection Method Dual Element Passive Infrared Coverage: Pet Immune Lens: 35' x 45' (10.6m x 13.7m); Long Range Lens: 75' x 10' (23m x 3m) - Optional part number Aurora-LR Detection Zones (2 fingers per Zone: Pet Immune Lens: 28 zones (eight over eight long range, eight intermediate, four short range); Long Range Lens: 6 zones (one over one long range, two intermediate, two short range) Pulse Processing: Intermediate, Standard or Harsh, selectable via jumper link Temperature Compensation: Advanced dual-slope temperature compensation adjusts for above and below body temperature Tamper proof design: Alarm relay cannot be compromised with a magnet Detectable Walk Rate: 0.5-10ft/sec (.15-3m/sec) Mounting Height: 7ft. (2.1m) recommended for pet installations Indicator: Red LED, enabled/disabled via jumper link Alarm Rela: Form A, SPST, 90mA @ 16VDC with 15-Ohm protective resistor Input Voltage: 8-16 VDC (Voltage reversal makes PIR inoperative) Current: 4 mA (standby; 4 mA nom. (alarm, LED disabled; 10 mA nom. (alarm, LED enabled) (All current nominal at 12 VDC) Operating Temp: 14F to 122F (-10C to +50C) Operating Humidity: Up to 95% RH (max.), non-condensing Dimension: 2.9" W x 4.1" H x 1.5" D (60mm x 104mm x 38mm) (max protrusion)
|
6-Pack Of AURORA PIRS
Don't be fooled by its small size! Next-generation Split-Zone Optics and advanced ASIC-based processing give the pet immune Aurora laser-sharp detection. Features: Immune to pets up to 40 lbs. Advanced ASIC-based processing Split-Zone Optics technology Ultra-low current Totally silent relay operation Tamper proof design
Specifications: Detection Method • Dual Element Passive Infrared Coverage: Pet Immune Lens: 35' x 45' (10.6m x 13.7m); Long Range Lens: 75' x 10' (23m x 3m) - Optional part number Aurora-LR Detection Zones (2 fingers per Zone: Pet Immune Lens: 28 zones (eight over eight long range, eight intermediate, four short range); Long Range Lens: 6 zones (one over one long range, two intermediate, two short range) Pulse Processing: Intermediate, Standard or Harsh, selectable via jumper link Temperature Compensation: Advanced dual-slope temperature compensation adjusts for above and below body temperature Tamper proof design: Alarm relay cannot be compromised with a magnet Detectable Walk Rate: 0.5-10ft/sec (.15-3m/sec) Mounting Height: 7ft. (2.1m) recommended for pet installations Indicator: Red LED, enabled/disabled via jumper link Alarm Rela: Form A, SPST, 90mA @ 16VDC with 15-Ohm protective resistor Input Voltage: 8-16 VDC (Voltage reversal makes PIR inoperative) Current: 4 mA (standby; 4 mA nom. (alarm, LED disabled; 10 mA nom. (alarm, LED enabled) (All current nominal at 12 VDC) Operating Temp: 14°F to 122°F (-10°C to +50°C) Operating Humidity: Up to 95% RH (max.), non-condensing Dimension: 2.9" W x 4.1" H x 1.5" D (60mm x 104mm x 38mm) (max protrusion)
|
|
|
