You are here: Home > Shop Brands > NVT > Power Video And Data Products
We found 9 results matching your criteria.
Power Video And Data Products
Sort By:
Page of 1
NVT NV-16PS10PVD Power Supply Cable Integrated HUB NVT NV-16PS13PVD 16 Channel Power Supply Built In Passive Receiver
NVT NV-16PS10PVD Power Supply Cable Integrated HUB


The NVT model NV-16PS10-PVD combines a 1 Amp/channel* power supply with pass through video and telemetry data, for up to 16 cameras, all over UTP wire. Designed for installation in the wiring/IDF telecom closet, or at the Control/MDF room, the NV-16PS10-PVD consolidates connectivity via standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pinouts.

NVT NV-16PS13PVD 16 Channel Power Supply Built In Passive Receiver


The 16-channel NV-16PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel (10 Amps aggregate). Use with NVT?s PVD? transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load/no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

NVT NV-216APV Passive Transciever For Power NVT NV-218APVD Passive Video Transceiver W/Power & data Connections
NVT NV-216APV Passive Transciever For Power


The NVT Model NV-216A-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NVT NV-218APVD Passive Video Transceiver W/Power & data Connections


The NVT Model NV-218A-PVD Video Transceiver with Power and Data is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NVT NV-226JPV Video Transmiter W/12W DVC Camera NVT NV-4PS10PVD Power Supply Cable Integrator HUB
NVT NV-226JPV Video Transmiter W/12W DVC Camera


The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VAC-to-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.

NVT NV-4PS10PVD Power Supply Cable Integrator HUB


The NVT Model NV-4PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 4 cameras, all over UTP wire. Designed for installation in the wiring/IDF telecom closet, or at the Control/MDF room, the NV-4PS10-PVD consolidates connectivity vial standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pinouts.

NVT NV-4PS13PVD Power Supply Passive Receiver HUB NVT NV-704JPVD 4 Channel Intergrator W/Power,Video,Data
NVT NV-4PS13PVD Power Supply Passive Receiver HUB


The 4-channel NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT?s PVD? transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

NVT NV-704JPVD 4 Channel Intergrator W/Power,Video,Data


Typically installed in the Wiring Closet or IDF room, the NV-704J-PVD is a passive ?pass-through? wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.

NVT NV-716JPVD 16 Channel PVD Cable Integrator
NVT NV-716JPVD 16 Channel PVD Cable Integrator


Typically installed in the wiring closet or IDF room, the NV-716J-PVD is a passive ?pass-through? wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.

   
 
Power Video And Data Products
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please