You are here: Home > Wire & Cable > Structured Wiring > SuperPro Hubs > Data
We found 27 results matching your criteria.
Sort By:
Page of 3
OpenHouse H628: Data Termination Hub OpenHouse H628: Data Termination Hub
The Model H628 Data Termination Hub terminates up to eight Cat-5 data lines. The hub features eight RJ-45 jacks and eight 110 punch-down connectors. Each RJ-45 jack connects directly to its associated 110 punch-down connector.
  • Certified 100 Base-T performance
  • Cat-5e performance in a multi-port hub
  • Terminates 8 Cat-5e cables
  • 110 punch-down connectors
  • Circuits may be bridged
    		• The H628 Data Termination Hub terminates up to eight Cat-5 data lines. The hub features eight RJ-45 jacks and eight 110 punch-down connectors. Each RJ-45 jack connects directly to its associated 110 punch-down connector.

  • Certified 100 Base-T performance
  • Cat-5e performance in a multi-port hub
  • Terminates 8 Cat-5e cables
  • 110 punch-down connectors
  • Circuits may be bridged
    • OpenHouse H629: Data/Telecom Termination Hub OpenHouse H629: Data/Telecom Termination Hub
    The Model H629 Data/Telecom Termination Hub provides a superior way to terminate data connections. The unit includes eight Cat-5 bridgeable circuits (110 punch-down connectors to RJ-45 jacks), and terminates eight Cat-5 wires.

    The Model H629 also offers eight additional 110 punch-down connectors for bridging up to four telephone lines. The unit is the ideal wiring interface for the OpenHouse Model H650 Integrated Voice Network.
  • Certified 100 Base-T performance
  • Eight Cat-5e bridgeable circuits (110 to RJ-45)
  • Cat-5e performance in a multi-port hub
  • Terminates eight Cat-5 cables
  • Additional 110 punch-down connectors for bridging telephone lines
  • Ideal for interface with the H650
    		• The H629 Data/Telecom Termination Hub provides a superior way to terminate data connections. The unit includes eight Cat-5 bridgeable circuits (110 punch-down connectors to RJ-45 jacks), and terminates eight Cat-5 wires.

    The H629 also offers eight additional 110 punch-down connectors for bridging up to four telephone lines. The unit is the ideal wiring interface for the OpenHouse Model H650 Integrated Voice Network.

  • Certified 100 Base-T performance
  • Eight Cat-5e bridgeable circuits (110 to RJ-45)
  • Cat-5e performance in a multi-port hub
  • Terminates eight Cat-5 cables
  • Additional 110 punch-down connectors for bridging telephone lines
  • Ideal for interface with the H650
    • HAI 35A00-1 600 Watt Dimmer Switch HAI 35A00-1CS 600 Watt Dimmer Switch - Case of 12
    The 600W switches use heavy duty components and UPB. UPB communication technology for professional strength, reliability, and the ability to be remotely controlled by UPB compatible home control systems. They work over existing house wiring for easy installation in renovations, retrofits, and upgrades and are UL-Listed. The HAI UPB 600W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch. The 600 Watt UPB Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Room Controllers, House Controllers, and home control systems to provide sophisticated lighting control.

    Specifications:

    Manufacturer: HAI
    Manufacturer Product No.: 35A00-1
    Dimensions: 4.1" x 1.75" x 1.45"
    Weight: 0.25 lb.
    Power Maximum: 600 W
    Current Maximum: 5A (non-dimming)
    Connections: 18 GA
    Mounting: Standard J box
    Input Power: 120 +/- 12V AC
    Input Frequency: 60 +/- 3 Hz
    Operating Temperature: -40° F to 104° F
    Compliance: UL and CE approved     		The 600 Watt UPB Dimmer Switch is used for controlling and dimming lighting loads up to 600 Watts. It comes with a default white paddle, connectors, and instructions.

    Requirements:

    Requires a neutral (white) connection wire. If you are using an HAI home control system with your switch you must install a UPB PIM & cable (HAI Part Number 36A00-1). If you are using the HAI Upstart Configuration software you must install an UPB PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).

    Recommendation:

    HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler (HAI Part Number 39A00-1). All HLC products are UL Listed and use Universal Powerline Bus (UPB) a digital communications standard for lighting and home control that ensures superior reliability. UPB has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB works over existing wires in a home and does not require new wiring. The HAI UPB 600W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch.

    Usage:

    The 600 Watt UPB Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Scene Switches, House Status Switches, and Home Control Systems to provide sophisticated lighting control. Our 600W switch has been engineered with less depth than our competitor's products; consequently, our switches are easier to install.

    Switch LED:

    The 600W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows: Switch is off - LED is blue, Switch is on - LED is off

    Colors:

    This switch comes with a default white paddle, connectors, and instructions. Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

    Wallplate:

    No Wallplate is included when you purchase this switch. With the exception of the 1500W and 2400W models, HLC switches accommodate standard Decora-style wallplates. Mix and match to easily add a personalized touch to any room.

    Configuration Software:

    When used with an HAI Home Control System HLC products automatically configure themselves, and outside software is not required. HAI offers HAI UPB UPStart Configuration software for professionals who desire to make advanced changes to our default setup. HAI UPB UPStart configuration software will allow you to change the function of this dimming switch to be non-dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.
    HAI 35A00-3CS 600 Watt Non-Dimming Switch - Case of 12 HAI 35A14-ALCS Switch Color Change Kit Case of 12 - Light Almond (LTA)
    The 600 Watt UPB Non-Dimming Switch is used for controlling loads up to 600 Watts. It comes with a default white paddle, connectors, and instructions.

    Requirements:

    Requires a neutral (white) connection wire. If you are using an HAI home control system with your switch you must install a UPB PIM & cable (HAI Part Number 36A00-1). If you are using the HAI Upstart Configuration software you must install an UPB PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).

    Recommendation:

    HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler (HAI Part Number 39A00-1). All HLC products are UL Listed and use Universal Powerline Bus (UPB) a digital communications standard for lighting and home control that ensures superior reliability. UPB has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB works over existing wires in a home and does not require new wiring. The HAI UPB 600W Non-Dimming Switch is capable of being set to a dimming mode.

    Usage:

    These 600W Non-Dimming switches are for loads like compact fluorescent and high efficiency lighting fixtures that should not be dimmed. The 600 Watt UPB Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Scene Switches, House Status Switches, and Home Control Systems to provide sophisticated lighting control.

    Switch LED:

    The 600W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows: Switch is off - LED is blue, Switch is on - LED is off

    De-rating :

    In three-gang installations the switch must be de-rated to 500W

    Colors:

    This switch comes with a default white paddle, connectors, and instructions. Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

    Wallplate:

    No Wallplate is included when you purchase this switch. With the exception of the 1500W and 2400W models, HLC switches accommodate standard Decora-style wallplates. Mix and match to easily add a personalized touch to any room.

    Configuration Software:

    When used with an HAI Home Control System HLC products automatically configure themselves, and outside software is not required. HAI offers HAI UPB UPStart Configuration software for professionals who desire to make advanced changes to our default setup. HAI UPB UPStart configuration software will allow you to change the function of this dimming switch to be non-dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.     		The Auxiliary Switch can be used with any HAI Lighting Control (HLC) Switch to make \"three-way\" (two switches control one light) and multi-way (more than two switches control one light) using conventional \"three-way\" wiring techniques. For the 600W Dimmer (HAI Part Number 35A00-1), 600W Non-Dimming Switch (HAI Part Number 35A00-3), 15A Relay Switch (HAI Part Number 40A00-1), and Auxiliary Switch (HAI Part Number 37A00-1). Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.
    HAI 35A14-BLCS Switch Color Change Kit Case of 12 - Black (BL) HAI 35A14BRCS Switch Color Change Kit Case of 12 - Brown (BR)
    For the 600W Dimmer (HAI Part Number 35A00-1), 600W Non-Dimming Switch (HAI Part Number 35A00-3), 15A Relay Switch (HAI Part Number 40A00-1), and Auxiliary Switch (HAI Part Number 37A00-1).
    Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.     		For the 600W Dimmer (HAI Part Number 35A00-1), 600W Non-Dimming Switch (HAI Part Number 35A00-3), 15A Relay Switch (HAI Part Number 40A00-1), and Auxiliary Switch (HAI Part Number 37A00-1).

    Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.
    HAI 35A14GRCS Switch Color Change Kit Case of 12 - Grey (GR) HAI 35A14IVCS Switch Color Change Kit Case of 12 - Ivory (IV)
    For the 600W Dimmer (HAI Part Number 35A00-1), 600W Non-Dimming Switch (HAI Part Number 35A00-3), 15A Relay Switch (HAI Part Number 40A00-1), and Auxiliary Switch (HAI Part Number 37A00-1).

    Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.     		For the 600W Dimmer (HAI Part Number 35A00-1), 600W Non-Dimming Switch (HAI Part Number 35A00-3), 15A Relay Switch (HAI Part Number 40A00-1), and Auxiliary Switch (HAI Part Number 37A00-1).

    Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.